Flash ActionScript 3.0 stop all video clips

Hello everyone. I was hoping that someone could share some knowledge of AS3 with me

-Situation I have several frames. Each image contains a movieclip. Each movie clip has audio and a plaintiff bar. Is there a next button to switch between the images in the main timeline and back.

Question- When you press back or next button, movieclip audio does not stop and it overlaps the next or previous image!

Desired result- When you click the next or back button, it will stop 'none' movieclip that plays before going to the previous or next frame.

I think I'll be having a lot of frames (so a lot of clips), coding so individually each back/forward per image for a specific movieclip button is a bit complicated and reveals be buggy at this stage.


Question- Is there, and if there is, what is the function to movieclips all stop playing?

for example

function next(Event:MouseEvent):void {}

< stop(); all video clips >

nextFrame();

}

next_btn.addEventlistener (MouseEvent.Click, Next);

Thank you all! Your insight is most welcome and will be appreciated.

You can use:

function stopAllF(mc:*):void {}

MC. Stop();

If (mc's MovieClip) {}

for (var i: int = 0; i<>

If (MC.getChildAt (i) is the MovieClip) {}

stopAllF (MovieClip (mc.getChildAt (i)));

}

}

}

}

but I would recommend that you use the removedfromstage for flvplayback components code and leave stopAllF it was like that.

BTW, if you have a small number of movieclips to stop on an image, and they have no child movieclips that need to be stopped, the same code removedfromstage works for them too.

and again, please check the answers useful/correct.

Tags: Adobe Animate

Similar Questions

  • A project that I created is no longer works.  All video clips .mpg who ask to be reimported, and when I try to import from its original folder, all the files are slim.

    I currently have iMovie 10.1.2 and OS 10.11.6.  All except a video clip in a compilation of long hours are black with an exclamation mark.  They have the error statement, that the file is missing, re-import the original source media.  The clips are all .mpg and had imported fine when I created the film project of the month of May.  When I try to use the function "Import Media" drop, and I go in the folder on the desktop files located in, all the original .mpg files are low.  The two pictures that were in the project appear on the lower part.  Oh, and I did all that stored on the cloud.  I also wanted to start a new project, part II, but all the source files show a similar dim for all .mpg files.  Apple decided not to allow the .mpg files in iMovie?  If so, what is my next step?

    iMovie accepts more mpg files. The easiest way to work with them is in the finder do a right-click on the mpg file and select "encode the selected video files. In the dialog box that appears, choose the desired conversion. The converted file appears in the import iMovie window, and you can import it.

  • Last import in Lightroom put red cast / fog on all video clips... they can be viewed on computer without this casting

    Hello

    My last import of Lightroom to approximately 10 video clips that all have a red go up to them. Whether they are searchable in the red fog corrupted that Lightroom ask it. When I right click on the video on Lightroom "Show in Finder", each clip has no red mist. They can be viewed perfectly [without fog / cast] on the my computer as imported to Lightroom.

    Please tell us if you can,

    Thank you!

    -BrianP

    You can reset develop settings applied to the video in the library view in section rapid development on the right sidebar (reset all). My guess is that a preset with a change in the balance of whites got applied to your video. Make sure that the popup of the white balance to develop quick says "under fire."

  • Stop all nested clips

    Hello

    I did a series of nested clips, and to stop all the movements that I wrote this code:

    on {(press)
    MCinMCinMC.stop ();
    MCinMCinMC.MCinMC.stop ();
    MCinMCinMC.MCinMC.MC.stop ();

    MCinMCinMC.MCinMC1.stop ();
    MCinMCinMC.MCinMC1.MC.stop ();

    MCinMCinMC.MCinMC2.stop ();
    MCinMCinMC.MCinMC2.MC.stop ();

    MCinMCinMC1.stop ();
    MCinMCinMC1.MCinMC.stop ();
    MCinMCinMC1.MCinMC.MC.stop ();

    MCinMCinMC1.MCinMC1.stop ();
    MCinMCinMC1.MCinMC1.MC.stop ();

    MCinMCinMC1.MCinMC2.stop ();
    MCinMCinMC1.MCinMC2.MC.stop ();

    MCinMCinMC2.stop ();
    MCinMCinMC2.MCinMC.stop ();
    MCinMCinMC2.MCinMC.MC.stop ();

    MCinMCinMC2.MCinMC1.stop ();
    MCinMCinMC2.MCinMC1.MC.stop ();

    MCinMCinMC2.MCinMC2.stop ();
    MCinMCinMC2.MCinMC2.MC.stop ();

    This code works fine, but if someone can explain how to write this in a way more compact?

    attached to a framework:

    {yourbtn.onPress = function ()}

    stopAll (MCinMCinMC);

    stopAll (MCinMCinMC1);

    stopAll (MCinMCinMC2);

    }

    function stopAll(mc:MovieClip) {}

    MC. Stop();

    for (var s:String MC) {}

    {if (typeof (MC [s]) == "MovieClip")}

    stopAll (MK [s]);

    }

    }

    }

  • The use of actionScript to speed up the video clip causes weird problems

    I use the script below to expedite a movieclip

    onClipEvent (load) {}
    NF = Function (); {
    nextFrame();
    }
    setInterval (NF, 1000/fps);
    }

    Well, a button inside the movie clip is linked to an another movieclip "parent". When the button is clicked above through the ignorant parent movieclip her stops at a pace fast enough speeds until she runs into the image tag where this clip accelerates resides in the parent movie clip, then it stops and returns to normal.

    Does anyone know how to avoid this problem? I know it works because there are other 3 buttons that work like a charm without accelerates using the above script.

    Or does anyone know another way to speed up the movieclip outside the use of the script above?

    Any help would be greatly appreciated, thanks in advance!

    Yuri = setInterval (f, t) starts a loop. He repeatedly calls the function f() every milliseconds t up to what a clearInterval (Yuri) is executed.

    the most common problem that occurs with setInterval() runs twice (or more) with no intermediary clearInterval(). When that happens all hell breaks loose and the swf will call the function much more quickly than expected and can not be stopped (easily) little matter how clearInterval() statements you try and run.

    to avoid this problem, the simplest method is to run a clearInterval() just BEFORE all the statements of setInterval(). It does not hurt anything (try and) clear and interval that does not exist and sometimes he'll stop the seemingly weird problems that occur with intervals of out of control:

    clearInterval (Yuri);
    Yuri = setInterval (f, t);

  • How to stop all the clips of film after 15 seconds

    Hello

    I have a banner online with a delay of 15 seconds. There is a clip in loop within the banner, and I need a way to stop this movieclip after 15 seconds. any help would be fantastic. Thank you!!

    I can not really tell you where you need to put it since I have no idea of what it will take to stop whatever it is that you stop.  If it's a movieclip that lives in your main timeline, you need to do is put the setTimeout in the main timeline and use the function it calls to order the movieclip to stop();  You'll need assign a name example to the movieclip in order to tell him to stop.

  • gotoAndPlay - refresh all video clips.

    I am trying to create a refresh button using the following code on a button.

    on (release) {}
    gotoAndPlay (2);
    }

    It works well to return to the part of the timeline that I want to, but because I use child movieclips with gotoAndPlay, only the main storyline from the beginning, the child movieclips stay as they were.

    Is all the same for the whole movie to return to the beginning?

    Thank you very much.

    You must explicitly everything back to the start state, or you can recharge your swf file:

    {We (Release)}

    loadMovieNum(_root._url,0);

    }

  • Several video clips on stage and layers - play and pause all (via the buttons)

    I've been designing a Visual presentation in Flash CS5, there are a few video clips on the stage who are set to play a certain amount of time. The problem I have is that I'm not familiar with coding/actions. I want to have a play and a pause button to pause at any time (not a given) and speak with the public. Then, I want to be able to click on the play button to resume from there (wherever I stopped of). I hope get help and be able to learn from your responses. I don't know how clear my question is, but I can clarify if you need me for...

    Thank you very much!

    If you see no error message and everything works the way you want, you're good.

  • Stopping several videos at the same time

    I need to find a way to stop several videos to play at the same time in a classroom or other means.  I use the hero of edge to play videos.  I do not expect people to click on making a break on a video before you go into another section of my site and my site has about 30 videos, so I need to find a way to take a break videos at the same time if something is clicked which redirects to another section, out of the videos page... since I don't know what video mode is reading at the time.  Is there a way within hero edge or edge animate itself, according to what would work better, to stop all videos at once?  I tried to add several classes in a div with orders from edge of heroes; There is no positive result.  It is only to stop the first video mentioned in the class.  Any solution or idea would be useful.  Thank you!

    If you add videos by dragging from the library panel to edge host, then you can Turn off the "Auroplay" for each video.

    But if you add using javasript, you can use the script to do this.

    Add this in the compositionReady event handler,

    $("video").each (function (_, vdo) {}

    VDO.pause ();

    });

    HTH,

    Vivekuma

  • Is there a way to clear all event listeners, to stop all the video clips, etc.?

    Is there a syntax for that?

    I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

    For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

    There are many cases of this kind of thing happens.


    Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.


    Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

    Thank you very much!

    Amber

    You must do it manually.

    or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

  • Help, please... Flash is ignoring my Video Clip

    I create a slide show on Flash 8 and I want the last slide actually be a video clip. It's a slideshow where images just play themselves, fading and fading, one after the other. No interactivity of the Viewer.

    So I imported the .mpg file, I need and set it in the last image in the slideshow. But for some reason any Flash is ignorant. Preview SWF Gets the last frame before the video clip, ignore the video clip and starts in the first frame of the timeline.

    The funny thing is, I've done this before and I can't understand what I'm doing wrong this time.

    MY LINE OF CONDUCT:
    1 file > import... > import video
    2. in the import of video, under the section SELECT VIDEO dialog, I select 'your computer' and with the ' Browse... '. ", select the desired .mpg file.
    3. in the DEPLOYMENT section, I mark "Progressive download from a web server." I prefer not to embed the video in the SWF file, because the video is about 6 minutes long. What I said 'embed video in SWF and play in timeline' can cause audio sinc questions involving more than 2 minutes long video clips.
    4. in the ENCODING section, I select profile high quality Flash 8 and leave the settings as they are. My encoding settings:

    Click here to see the Configuration of the encoding

    5. I select 'None' for the SKINNING

    6 then I press "Finish" and wait for flash encode my video file. When it is complete the encoding process, in my library I find the FLVPlayback instance and on the stage, is what I assume to be the first frame of the video clip (in my case just a black frame) with a Flash Video icon in the Center.

    When I saw the SWF or post - the video is ignored. Flash it jumps just as if he were not there.

    I tried to import a much shorter video file and it worked. So I think maybe this has to do with the length. But first, I used the exact same 6 minute video clip in Flash before and it worked fine. Secondly, I don't remember hearing about the problems with video clips of 6 minutes, Flash 8 or so.

    I also tried to import the same .mpg to a new Flash document, it set the default image single layer 1. But same result - the video would not play.

    I use a PC, quite capable of managing this kind of work. The .mpg file made from a .avi file using Sony Vegas video editing software. He played in all of the media players and seems perfectly fine.

    Any ideas? I am really puzzled. The fact that it worked before and suddenly gives me problems is particularly frustrating. Can anyone help?

    Thank you

    Are you going to put a stop(); action on the frame with the video? If not then flash will just a loop around the beginning or skip your video file.

  • Video clips will play only for a second before stopping in Movie Maker

    I am experienced with Movie Maker, but now when I try to set up a series of video clips, the video only play for one second (literally) before coming to rest. I tried several video formats without success. I am currently on updates and have never had this problem before. WMV files are choppy and slow and sometimes stop, too.

    Hi NessaWest,

    1. did you of recent changes on the computer?

    2. you receive an error message?

    I suggest that you disable audio and video filters in Windows movie maker and check if it helps.

    Video and audio filters are programs that are installed on your computer that help interpret video files so that they will display and play correctly. Windows Movie Maker uses when you import a video and audio, extract your project on the table of storyboard / timeline, and when you publish a movie.

    (a) open Windows movie maker

    (b) click on Toolsand then click Options.

    (c) click on the compatibility tab.

    (d) do one of the following:

    ·        To turn off a filter, clear the check box next to the name of the video filter.

    ·        To activate a filter, select the check box next to the name of the video filter.

    ·        To restore the default list, click restore all defaults.

    When you restore the default settings, the list and the filters settings are given to the last known good setting.

    Video filters in Windows Movie Maker: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to stop a freeze on transition framing between two video clips?

    Hi all

    Newbiee here

    How to stop a freeze on transition framing between two video clips?

    Cheers for your help in advance.

    Make sure that your clips have long enough 'handles', extra material before and after the change, the less both the duration of the transition.

  • "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

    "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

    I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

    All other non - CC Adobe video editing programs work.

    Help, please. Thank you.

    Dennis,

    Changing the video rendering engine should have solved the problem. Is it still pending?

    Thank you

    Regalo

  • How to stop the code that adds video clips

    Hello

    I have a code simply adding video clips. Video clips are on the same time move along the stage.

    The first clip is already on the scene and the code should add three more. Clips of three film set with the instructions if are added correctly (for positions origX and origY).

    But after adding the three, he keeps adding them. And not at all defined first x and y, but x = 0 and y = 0.

    How can I stop it after you add the three?

    The code is in a separate class file.

    Thanks in advance!

    Duck/public class extends MovieClip

    {

    var origX: number;

    var origY: number;

    var i: int;

    var newDuck: party;

    public void Duck()

    {

    origX = this.x;

    origY = this.y;

    this.addEventListener (Event.ENTER_FRAME, moveDuck);

    }

    function moveDuck(event: Event): void

    {

    This.x += 0.25;

    If (this.x is origX + 50)

    {

    addDuck();

    }

    If (this.x is origX + 75)

    {

    addDuck();

    }

    If (this.x is origX + 100)

    {

    addDuck();

    }

    }

    function addDuck(): void

    {

    newDuck = new part();

    parent.addChild (newDuck);

    newDuck.scaleX = 0.55;

    newDuck.scaleY = newDuck.scaleX;

    newDuck.x = origX;

    newDuck.y = origY;

    }

    }

    You operate Duck() instanciates an enterFrame function that actually creates instances the duck on the scene. Once started, there is nothing to say things to stop creating new ducks. You can add a loop for which counts the number of ducks you want and then kills the enterframe function. I don't know why your x and y values are reset to 0.

Maybe you are looking for