Stop all nested clips

Similar Questions

• Flash ActionScript 3.0 stop all video clips

  Hello everyone. I was hoping that someone could share some knowledge of AS3 with me

  -Situation I have several frames. Each image contains a movieclip. Each movie clip has audio and a plaintiff bar. Is there a next button to switch between the images in the main timeline and back.

  Question- When you press back or next button, movieclip audio does not stop and it overlaps the next or previous image!

  Desired result- When you click the next or back button, it will stop 'none' movieclip that plays before going to the previous or next frame.

  I think I'll be having a lot of frames (so a lot of clips), coding so individually each back/forward per image for a specific movieclip button is a bit complicated and reveals be buggy at this stage.

  
  

  Question- Is there, and if there is, what is the function to movieclips all stop playing?

  for example

  function next(Event:MouseEvent):void {}

  < stop(); all video clips >

  nextFrame();

  }

  next_btn.addEventlistener (MouseEvent.Click, Next);

  Thank you all! Your insight is most welcome and will be appreciated.

  You can use:

  function stopAllF(mc:*):void {}

  MC. Stop();

  If (mc's MovieClip) {}

  for (var i: int = 0; i<>

  If (MC.getChildAt (i) is the MovieClip) {}

  stopAllF (MovieClip (mc.getChildAt (i)));

  }

  }

  }

  }

  but I would recommend that you use the removedfromstage for flvplayback components code and leave stopAllF it was like that.

  BTW, if you have a small number of movieclips to stop on an image, and they have no child movieclips that need to be stopped, the same code removedfromstage works for them too.

  and again, please check the answers useful/correct.

• How to stop all the clips of film after 15 seconds

  Hello

  I have a banner online with a delay of 15 seconds. There is a clip in loop within the banner, and I need a way to stop this movieclip after 15 seconds. any help would be fantastic. Thank you!!

  I can not really tell you where you need to put it since I have no idea of what it will take to stop whatever it is that you stop.  If it's a movieclip that lives in your main timeline, you need to do is put the setTimeout in the main timeline and use the function it calls to order the movieclip to stop();  You'll need assign a name example to the movieclip in order to tell him to stop.

• stop() Action ignored in nested clip

  Hello!

  Maybe it's a bug in CS4, but I could not find any help for this problem:

  I have a movie frame by frame. In the framework of one, I put a clip on the stage via ActionScript:

  var clip_mc = new Clip();

  addChild (clip_mc);

  In this film clip found a second nested clip that contains 30 images, through which runs a classic motion tween in the timeline panel. The last frame of the Clip has a stop() command so that it will not loop.

  However, the stop command is ignored. So when I run the movie, the motion tween plays over and over again.

  If I place the clip directly on the stage (and not dynamically), it behaves normally and the stop() command works. Once again, if the internal clip with the motion tween is located directly in the clip_mc (i.e. only nested once, not in the second clip), everything is ok.

  Someone met by this combination of placing dynamically a clip with a double nested inside which seems to "break" the order of action timeline?

  Thank you for reading this, I hope that I've not too bad explained!

  deflectordish

  Wait wait... it's still does not? Did you put ALL the library of video clips involved to "export for actionscript"? And don't forget to add in the stop(). Also, make sure that the code is on a keyframe at the end where you want the stop from happening. And another thing I did was to make sure that covered all tweening frames. The way you had it in your test which was, he did not understand the last image. It should work... tested and retested on my end. I'll you email my copy of work later. Let me know but if everything is put in place as I've described here.

  Jesse

• AS3 on CS3: How can I list all the clips nested within another clip?

  With AS2, I was able to trace the names of all the clips inside another using a statement like:

  for (i in myClip) {}

  If (typeof (myClip [i] == "movieclip") {})

  trace (myClip [i]);

  }

  }

  I tried this in a film of AS3 and I simply don't get anything in my output panel. How can I reproduce this function with AS3?

  for (var i: int = 0; i<>

  trace (myClip.getChildAt (i). (Name)

  }

• Stop all clips to move after a ripple-trim or clip-deletion.

  Is there a way to prevent all the clips to move to left/after ripple trim or delete a clip? If I create content, such as pasting a clip or ripple edit a clip to enlarge it, nothing changes, that is what I want. However, everything moves to the left when I remove the content (remove something or ripple trim).

  Thank you

  Hold down the CTRL key to keep the Clips to move.

  Good luck

  Hunt

• Sequences of Hotlinks PP to the SG with footage not nested clips

  Anyone know how to work with PP sequences that have been sent to the SG and that include nested sequences?

  The problem I have is that I often use sequences nested for my b-roll but when I send the main sequence to the PP SG with Dynamic link, I can't develop these nested sequences. This means I can't rank of each element of the nested sequence, the layers of classification applies to all the clips. It is a problem that the clips are often very different. Around that, the only way is to turn trigger my project between the PP and SG several times. Once for the main sequence and once again for each nested sequence. It is a real pain as everytime you need to close your PP project, and then open it again when you come back to SG.

  Found!

  

• Event.Target and nested clips

  Hey all,.

  
  Here's my dilemma; I have a bunch of video clips in my main timeline with at least 2 nested clips inside them, MyMc.nested1.nested2 etc.
  I gave the top most video clips that rely on the main timeline instance names.
  In a document class that I created a private variable typed as an array and placed all these MC names in this table.
  I then loop through the length of the array and assigned 2 event for each instance listeners.
  Example:

  for (var i: uint = 0; i < _activities.length; i ++)
  {
  _activities [i] .buttonMode = true;
  _activities [i] .addEventListener (MouseEvent.MOUSE_DOWN, Pick-up);
  _activities [i] .addEventListener (MouseEvent.MOUSE_UP, dropIt);
  }

  in the event pickup() is were my problem seems to be coming.
  In the microphone function, I have the following:

  event.target.startDrag)
  

  It seems to work, but only on the lowest nested movie clip... nested2
  I can use event.target.parent.parent.startDrag () and that seems to work... Except when I place an another movieclip in the second layer of the of the MyMC, if it is accidentally clicked, it will now slide on the stage.
  I tried to use event.target.mouseChildren = false, but that doesn't seem to work on the lowest nested object... nested2 as this seems to be one I'm clicking
  Is there something that miss me to say, click only the mc at a higher level, and then ignore all nested mc?

  Thank you

  Try to use: "event.currentTarget" and you can also set 'mouseChildren = false' on the clip you want to move (but what to put in a function init, not the mouse Manager).

• Need help to hittest with nested clip.

  I am a high school student, make a flash game for a project at school. The project is due tomorrow so I need quick help.

  I'm trying to implement a function for a placement test. I am using action script 2.0

  I am coding all in one layer not in video clips to not give me a code this format unless nececary.

  OK, here's the details.

  I have a clip with the instance name src_resolute and I have another clip that is nested within another clip named endbar.

  What I'm trying to do, it's when src_resolute strike endbar I want to make the next scene gotoandplay.

  The name of the instance of nested clips parent movie clip's background.

  If you need more information let me know, but basically what I want to do is when my character (src_resolute) main fact contact with the nested clip (a clip I've drawn inside another video clip) I want it jumps to the next scene or more precisely the scene 4.

  Thanks for any help!

  If these are instance names, use:

  {if (src_resolute. HitTest (Background.endbar))}

  No matter what

  }

• How to stop all pop-ups

  For some reason, each link (or javascript), I opened, even on google and similar websites, opens a pop-up.
  It is not a malware issue, I checked with Windows Defender, Nortor, Bitdefender and Kaspersky.
  I know that when Firefox keeps opening pop ups, it gives a warning and an option to enable it anyway... So, can given the amount of pop-up windows that I use, I stop all pop-up windows ('good' and 'bad') to appear?

  https://addons.Mozilla.org/en-us/Firefox/addon/Adblock-Plus/
  You can configure to ask first when it blocks a popup and you can check if it is a 'good' or 'Bad' pop-up.

• Can I adjust the speed of all the clips at the same time at the same speed in imovie10.1?

  I have a lot of slides / photos and prefer to adjust the speed of each of them at the same speed of s 3.0 at a time without going through each one.  When I do, it does not apply.  How can I do this?

  In iMovie 10.1.1 Select all photo clips in your timeline.  Click on the button info (an ' i' with a circle around it), top right of your screen. Enter your length of stay in the duration box that appears at the top right. Press return on your keyboard.   All your photos will now have the time that you set.

  Another way: before you open a new project, go to iMovie/preferences and set your default clip duration in the duration of clips.

• I have a paper stuck in the queue that stops all the impressions

  I have a paper stuck in the queue that stops all prints! The status shows deleting, but nothing happens. I tried normal deletion methods, but it is always the point in the queue. All the other battery printing upward behind and unable to print. Help

  TerryPickett,

  Try to run delete print jobs to remove all print jobs stuck in the queue.

  Rick

• Go for the summer. How can I stop all mail entering particularly undesirable!

  We will be at our cottage North of Wisconsin for the summer.  I want to stop all mail incoming (mostly useless) until September.  Is this possible?

  Optionally, you can contact your ISP and ask them if they can temporarily deactivate your account while you are gone. I've never done it myself, but it might be interesting to try to avoid having to go through hundreds, maybe thousands of meetings, extensions of the body part, malfunctions and other large email When you get back.

  SC Tom

• Media Player Windows XP automatically wrong info for my titles. How can I stop all the automatic update of news media?

  Windows XP Media Player is automatically putting the wrong info for my pieces for example the name of the album and the cover.

  How can I stop all the automatic update of news media?

  Windows XP, the version of Windows Media player to date. ' Retrieve additional information on the internet "is not checked.

  "Rearrange music in rip music folder, using rip music settings" is not checked

  "Keep my ratings stars as global ratings in files" is unchecked

  "Maintaining the codecs automatically" is unchecked.

  Under Privacy Options, everything is disabled except "set clock on devices automatically.

  Thank you for your help in this endevor.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what version of windows media player do you use?

  Try the fix tool in the following article and verify.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  See also:
  Resources for the resolution of problems in Windows Media Player
  http://support.Microsoft.com/kb/843509

• When you go on vacation, how can I temporarily stop all the emails?

  When you go on vacation, how can I temporarily stop all the emails?

  http://www.askdavetaylor.com/how_to_set_auto-reply_vacation_reply_msn_hotmail.html