Flash behave strangely when added to Dreamweaver

Similar Questions

• The mouse behaves strangely when RDPing in Terminal Server

  Hi all

  I have a few users with Mouse emits when they in their Server RDP terminal server. Some mouse clicks are part not at all and some simple clicks are part such as double-click, and some are normal. Double-tap speed is set at a rate that would not cause this. "Click items as follows" is defined as double click. Anyone have any ideas as to what it could be?

  Hello

  For assistance on this issue, you can ask your question in the below link:

  (Services Terminal Server) remote desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• My office is behaving strangely, slow, sometimes does not start Windows.

  * Original title: strange

  OK, so I have a desktop with Windows 7 installed above as my users families. My family tends to put viruses or other forms of malware on the desktop as they constantly plugging their friends drive etc. Last week my office just behaved strangely, running slow, sometimes not start Windows and even run checkdisk on each reboot. I have however to discover the reason for all these questions, because it turns out having a Trojan horse installed on the desktop computer that allows a hacker to access my PC remotely. AVG detects whenever I had scanned my office but unfortunately the Trojan horse is just renamed and removed to another place when detected. Last week I did a new install of Windows 7 and everything worked fine until yesterday. I noticed that AVG was not updated yesterday. I first tried to install what AVG but was unable even to reinstall AVG.  I didn't realize that once I have turn off the Windows Firewall I can install and update AVG without a problem. However the firewall Windows has not prevented never AVG update or install in the past. I thought it was a form of malware, the origin of this problem, but after the start of the HBCD and scan with malwarebytes and also to scan using Kaspersky rescue disk. I have not found a malicious software. Even my windows laptop 8 I have no problems updating and installing AVG, while Windows Firewall is enabled. I really believe that it's some form of malware with managed to bypass all virus scans. Please give me some advice and let me know what is the problem and the solution. Thanks in advance

  It has been long since I had no faith on average. :-)

  Use the removal of AVG on this link tool to completely remove AVG, following the installation of Microsoft Security Essentials here ...

  In addition, pull it out of Windows 8 and leave Windows Defender to take over. You will have less problems you get with AVG. There is no need to install MSE in Windows 8, as it's already there...

• Photoshop behave strangely (help please!)

  Photoshop noob here!  Any help would be appreciated.  More I use Photoshop cs6 (64-bit) on my computer the strange behavior starts to happen.  The first time, he started very well, I installed as usual.  Then opacity out of the blue started to behave strangely.  Even when I turned a color to 100% opacity and buried it on top of another color in the same layer would not completely opaque.  I could still see the shapes/lines through the so-called 100% opaque.  I searched the internet and cannot find a solution.  I continued to come following the suggestion to reset all the tools that did not work.  When told to erase my photoshop preferences (the psp file) manually and by using the shortcut CTRL-SHIFT-ALT at photoshop startup the first launched photoshop and then gave rise to an error "Could not complete your request because it is not the right kind of document.".  I could only click ok and continue to work on my messed version of photoshop.  Second, the ctrl-shift-alt shortcut did not work at all.  Fed up, I disabled and uninstalled, then reinstalled Photoshop.

  It worked perfectly fine for awhile and then different strange behavior began don't reproduce.  First of all, the gum has behaved like a blue brush in the background layer.  Instead of erasing of white and see the checkerboard pattern, as I always used to it would be just blue color instead.  I could do it so different opacities.  On the background layer, it is essentially a blue brush.  It was not super boring I could add another layer, but then my desiree pressure has stopped working on my Tablet too.  I downloaded all the latest drivers for the Tablet without result.  Yet once told me to try to remove my preferences that once again resluted in the error "Could not complete your request because it is not the right kind of document.".  Also the shortcut ctrl-shift-alt still does not work.

  I looked everywhere for a solution and still can't understand why Photoshop continues on this self-destructive path.  Any help would be appreciated. Again, I'm new to photoshop so if the answer is very obvious then sorry!

  Reset preferences is first aid for PS uninstall and reinstall will not fix an error in this file.

  You must start PS immediately hold down the ctrl alt shift keys (assuming that the Windows operating system) and you will get a window to reset.  If you're not fast enough, you will see the splash screen.  Some find help by pressing and now the 2 keys, start PS and immediately holding down 3.

• Flash files do not replay in Dreamweaver

  I use Mac 10.4.8. My swf Flash files are not replay in Dreamweaver 8 when displayed in a browser. There, nobody knows the reason why?

  When you navigate directly to the swf file, plays? If so, then the
  problem is in the code on the page. If not, then the problem is in the swf file
  file.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "Merlin Man" wrote in message
  News:ergu4t$9n0$1@forums. Macromedia.com...
  > In the browser they play at all. I tried to explore, Firefox and
  > Safari, anyway.

• My macbook pro was factory reset and now it lights up with flashing? And when I go beyond that to choose the network but I can't go beyond that

  My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing

  The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.

  Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support

  Looks like your hard drive is dead.

  I hope that you have a backup.

• I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP

  Question
  I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP. Thank you

  --> Updated Firefox to version 10.0.1

  • How to download and install Firefox on Windows

  Follow the suggestions mentioned in the section "Flash does not work properly or will not update" in the following article:

  • Flash Plugin - maintain and troubleshoot

  Check and tell if its working.

• Money 2007 - I can't when adding an account a have the list of the banks of attachment

  Hello;

  I can't when adding an account a have the list of banks in connecting the answer indicates that the list is temporarily absent. Try again later, but without success. Thank you.

  These forums are in English only.  You want a French for Microsoft Money forum.  It's here: http://social.microsoft.com/Forums/fr-FR/money/threads

• How WMP 11 automatically copies the songs on record monitored when adding songs to the library?

  I mean, it's like the "copy files in the itunes folder media when adding to library" in itunes. its easier to have my songs scattered in HD

  Hi 70pride,

  Follow the steps in the article.

  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

  The Windows Media Player library: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-library-frequently-asked-questions

• Attachments of any file type flashes and disappear when you try to open.

  Attachments of any file type flashes and disappear when you try to open.  Downloads act like they work, but do not.  No file is on the hard drive with run or save.  Used email is yahoo and hotmail.  This is my mother's computer and I have no idea where to start.  Guessing that it is a security problem, I thought I'd start by turning off security.  Update of AVG 9 last week, but it would be the only change we know offshore.  Any sugguestions?

  Reinstalled AVG 9 until I read your answer with the removal tool.  All is well now!  Ran some scans.

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• Use of TCP Port when adding sensors to virtual machines

  What port TCP VMS use when adding a sensor to VMS security monitor, etc. Device Manager?

  RDEF listener uses port?

  Port UDP 45000 remained in IDS4.x or is it only required in ID 3 x?

  Thank you.

  A listener RDEP, if I understand the context of your question, is the process on the ID device that is connected to by customers RDEP (VEI, CTR, VMS / IDSMC). Since this is a server process, he listens to TCP 443. It can be configured to listen on TCP 80, but it is not a default setting.

  The only other default port used by Cisco IDS 4.x is TCP 22 (SSH) to access the CLI and some file copy operations (scp, for example). Again, you can configure the use of TCP 23 (TELNET) to access CLI, but is not a default setting.

  In summary, a device (IDS-42XX, JOINT-2, NM-CIDS) will have only two ports open by default. 22 TCP and 443. 22 TCP is used by SSH for CLI access and TCP 443 is used to access RDEP and IDM.

  Finally, UDP 45000 is not used by Cisco IDS 4.x; It was only used in 3.x and more for the former communication protocol.

  I hope this helps.

  Alex Arndt

• TCS wrong password when adding from MSD

  I have a problem when adding the TCS on the MSDS. MSD does not accept the password. I used the same admin for the CHT password when you access the web interface.

  TCS - tms.jpg

  

  Any clue?

  Thanks in advance.

  TMS uses the TCS API to communicate with the server, you must set a password for this account in the CHT under management > Configuration > Site settings.  See the administration of CHT Guide for detailed instructions, note this guide the administrator for version S7.0, but the configuration is the same for all versions of the TCS.