Flash CS6: Jerky Animation and Photo appears distorted while dragging

Hi people, I use Flash CS6 (don't have not upgraded to animate again). I use a lot of Adobe design products, but fairly new to Flash, even if I understand the basics of the timeline and such. I have two problems. I'm trying to set up a short animation 1920 x 1080 (30 sec) in which photographs soar since the center of the screen. As they soar, they largest zoom. Picture a flying Gallery. I have about 4 or 5 that do one after the other. I have implemented simple tween animation. In theory, it works fine, but when the image which was a PNG 150ppi of photoshop that I converted to a symbol, moves slowly outward and backstage looks jerky and slightly distorted. You can't even tell what looks like the person in the photo. I noticed when I upped the framerap from 24 to 100 (just for the experience), the image itself looked MUCH better and you can see during the whole movement, but the movement itself, the path has become choppier. In addition, to this framerate, I can't export to Quicktime due to the memory. I did a TON of animation in PowerPoint and Keynote over the years and I look forward to this kind of unpredictable be chopped of their trajectories and pre-sets, but Flash? My second problem is that no matter what I do, when I export as SWF, trial versions that were looking for clear and undistorted image during the movement seemed fine hen evenw (movement jaggedy always there) I enlarge the screen to fill to the top of my desktop screen iMac together... but when exporting quicktime If I enlarge them, the low resolution and pixelated picture looks. What should I set my file upi bigger than 1920Pixel by 1080 pixels? At the end of the day, we put this video on an intranet company for an event. The project manager wishes than the possibility of going 16:9 full screen on the users screen. Tips on how to make these movements and the image itself see without the rough, look distorted? And what kind of Framerate is my MAX if I know that it will eventually be converted by a third party and put it on the web? Thank you

Exporting to video has become much better with a newer version of Flash you use. It would be the only practical way to get smooth cs6, a large and complicated scene animation, to export a sequence of images.

With Animate, when you try it, you can export any animation complexity, at any frame rate and get a perfect cadence.

Which hand, make sure that you have defined your bitmaps in the library to be Lossless and allow smoothing. Also, make sure that the quality of the scene is set for a better default (in the middle). You can place this script in frame 1, and it will improve the motion a lot:

internship. Quality = "best";

With CS6 that above the line will make the standard export movie be even choppier, but as I said, to do a sequence of images to CS6 in order to obtain the expected pace.

Once you have exported perfect MOV you can then use Adobe Media Encoder to try different settings to do a MP4 is a more practical file size.

Tags: Adobe Animate

Similar Questions

CC think Flash CS6 is installed and is not

Well, I really need Flash CS6, because Flash CC does not lower than Flash 10.3 publish and not publish AS2 specifications of what sites are demanding. That alone cause massive headaches.
So I need Flash cs6, which I used to have installed (legally), but my license expired so I went to creative cloud.
Creative Cloud Desktop think again I Flash CS6 my desktop, but I did not. I deleted it when I went to an SSD for the system hard drive.
So I can't download Flash CS6 either and I web banners to be shipped.
Huge frustration here...
Thanks in advance for ANY help.
Simon.

Well, the problem (no thanks to all of Adobe. I've been on "Live Chat" for an hour without help...) I 'had' a .dmg for Flash CS6 file and when I installed it I just clicked on 'I have a subscription.

But the problem with Cloud Office Creative - there is too much trust on it (no alternative download option) and the software itself is flakey. He constantly asks to update itself, God knows why, and then it does not work when you need it. And since I'm now pay each month of service, I'm not impressed by the product and attitude from Adobe. Why support for AS2 and Flash<10.2? bah="">

Is still flash cs6 being use?

I understand that flash is now called animation, and as a student, I have to learn flash cs6. I wondering if anyone in animation, fields of web design uses flash cs6 combine animate and are the features of the anime of the same thing with flash cs6?

There are some features in CS6 that were abandoned when Adobe re-wrote the application as a 64-bit application. Also, some optional features such as the CreateJS Toolkit in CS6, made internal to animate (and also in recent versions of Flash Pro CC).

For example, 95% of the CS6 is identical to animate. The missing parts are AS2 and TLF, cs6. The new parts are the integrated CreateJS and a number of improvements of the interface to animate.

Is it still possible to get flash cs6 in 2014?

I read that flash cs6 had BONES and cc flash does not support the bones. is there a way to buy flash cs6 not cc?

Look here Creative Suite 6

Flash CS6 (ANE) question

Hello
Do you know how Flash CS6 manages DONKEY and the new versions of AIR?
Is there a link that shows / explain?
Thanks in advance

I think that if you spent 10 minutes, you will find this button and if you have a real device, you can test yourself

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

. FLV appearing don't not in publication .air (Flash CS6)

Hello
I made an interactive story with Flash CS6 and ActionScript 3.0, the characters are all .flvs they are animated and transparent backgrounds need so that these can be placed on a separate background. However when I publish the piece as a .air, install and run the application, the .flvs do not all appear. The only advice I could find is to make sure that in the .xml found in the same folder as the .air that transparency is not defined 'transparent', the value is "false", I tried to change to 'true' just to check, and it did not work. Any help what so ever would be greatly appreciated.
Thanks in advance,
Chris

This can have many reasons

1 make sure that you add all the necessary assets manually in export-air options

2 videos have some restrictions as their dimensions must be divisible by 16, also flash could have problems with the audio so its not standard 44.1 kHz but 48 kHz

etc.

Make sure that you check 'allow debugging' in the export options for the advice which was wrong.

Also just a tip: I don't see how this is a good design to characters in a story interactive everything, you must convert them to the format swf and do movieclips out of them.

This will keep your manageable size and give you more control.

I signed up for flash cc, but what appears in my creative cloud is flash cs6

I signed up for flash cc, but what appears in my creative cloud is flash cs6

Hello

Please check if your system is compatible with the last Flash Pro CC 2015 more, system requirements | Flash Professional

If it is then please follow the steps described in the following link to check if previous Versions is selected:

Download and install Adobe Creative Cloud apps

Let us know if that helps.

Kind regards

Bani

What happens if my pc is too slow for Flash CS6? can I try (and find) old version?

Hi all
I tried the trial version Flash CS6 but my computer is too slow (less than 2 GB of RAM available) and I am not able to use it . I need to do animation cartoons and I have not need of order code to make... What do you recommend me, please? If I use an old version (the one who? ) Flash 8 ? is there a trial version on the site? ) It can work ? I mean I can what he valid for my works or is a point of against me for the market?
I want to be sure before you buy the product...
(what is the right place to ask?)
Thank you anyway
Adelina

You can catch Macromedia Studio 8 on Amazon for $ 50. Flash 8 has a great under XP, a half decent machine should have no problem with this version. I remember that I ran with 512 MB of RAM on a Pentium IV.

http://www.Amazon.com/GP/offer-listing/B000AQHMK0/ref=dp_olp_used?ie=UTF8&condition=used

And you won´t find better freeware imo.

Flash cs6 text does not appear.

Hello
I just opened flash cs6 and discovered that the text tool does not work well. It allows me to select the tool and place a text box, but the text does not appear. It's too much space in the text box, but I can't. The alpha is already at 100%, I don't know what is happening.

Hi all

Please read this technical note for more information on how this problem can be solved.

Kind regards

Suhas Yan

questions about the uses of flash cs6 and the code that it exports VS. switch to other tools

I looked at the overviews on the new version of flash and I did experiment a bit with muse and edge of adobe. I have also heard the announcement Friday 4.1 android devices will run is no longer the flash player. my questions are:
1 does flash cs6 fuction basically the same design-wise, but when it comes to export the file, the code a combination of html and javascript rather than in a solid swf file as it was currently publishing my work as?
2 East edge meant to supplement flash? or he will take some of the uses of the flash so edge can publish for flash and mobile devices will remain in the area of desktop applications?
3. If I created full-flash sites in older versions of flash, can I import in cs6 and make them exported as functional across all devices?
I guess that, overall, just trying to get an overview here so that I can decide how to move forward and what to focus on.
Thank you!

1. Yes. The Toolbox for CreateJS is an additional downloadable extension for Flash CS6. He's going to post html and js files that will provide the animation rather than the swf file that you would normally publish. The success or failure of the version of javascript from your animation is the result of the work within the Toolbox. You are a bit constrained in the use of the timeline in Flash for your animations. If you are only working in Actionscript, then the output will be very disappointing.

2 edge outputs javascript, css and html for you give an animation. The user interface allows you to design within the limits of what can make the border. You can preview and adjust and adjust your animation work you. Edge is a tool of html5. It can create some animation html5. It is not a replacement for Flash. It's something that you can use to integrate the animation in html instead of Flash.

The problems and the benefits of each are unique. It is a good substitute to learn javascript, css and HTML 5. If you don't understand the code that is created from each of these tools, you can easily end up with huge, inflated, files which improved. I'm very biased towards really knowing what is happening. If I need to change something, I want to be able to enter the code and make a change, do not add an extra piece of code to work around what was there. I don't use any of the timeline, and so nothing of what I publish using CreateJS. Well, he's going to publish, but nothing happens because there is nothing on the timeline to translate.

You can download a trial version of Flash CS6 and try to box at tools for yourself. Edge is still in free preview, you can get a copy to http://labs.adobe.com and try to see how it works.

Also, if you do not use the Greensock Animation with Flash platform, take a look at this. It has recently been extended to ensure similar Javascript for most libraries. http://www.greensock.com/

Flash CS6 and SDK 10

Hello

I had really intended to build a new application for BB10 using Flash Professional CS6. In fact, I was very happy. I have followed the development of BB10 and I'm a big believer in the potential. I expected to be part...

I tried to load the Blackberry 10 SDK in Flash CS6 and got nowhere. There is minimal support both online in the forums... Some users seem to have thought of it using some hacking... It is not intuitive and easy to use but...

BlackBerry 10 SDK has been for AIR - 3.0

Adobe is now running AIR 3.5.

Then the release of the SDK Gold is out and I was a happier time, think that some of the compatibility has been set, but as far as I know... It's the same as before download... AIR 3.0 SDK

I understand that the SDK works with Flash Builder, but honestly, I'm boggled as to how they are imported and linked to Flash Pro... CS6...

I would have a return e-mail, but I couldn't find a contact e-mail... So, I posted in the forum...

I hope in the future, more attention will be given to developers Flash Pro and compatibility will be fixed...

I am looking forward to BB10 and wish RIMM much success...

I strongly recommend that look you in Flash Builder, if you do any serious coding. The workflow is much more intuitive than Flash Pro especially for mobile development. That being said, I still use Flash Pro every day to the creation of content, but I do all my coding in Flash Builder.

As others have found ways to get the API in Flash Pro there, but it is not a supported platform and will not in the short term. If you are not interested in using the API, I published an article on how to create an application BlackBerry 10 with Flash Professional here - http://supportforums.blackberry.com/t5/Adobe-AIR-Development/How-to-Create-a-BlackBerry-10-AIR-Appli...

We are upgrading to the new AIR runtime, but it won't be ready for the launch. It will be released in an updated version of the BlackBerry 10 operating system in the future. You can get updates on the AIR here - Roadmap https://developer.blackberry.com/air/downloads/roadmap/

Kind regards

Dustin

Flash CS6 does not react and or breaks down, someone has a solution?

Hello
I take an online class this semester and our class requires the use of the version of Flash CS6.
I just got the phone with the customer service and we were able to solve the problem. In fact he was doing me a favor because apparently they provide no service for Flash CS6 version and they advised me to post on the forums.
I use an IMAC late 2013, El Capitan. The CC version works fine, but my teacher wants us to use the CS6 version, I guess it has more features. I have read the forums and have tried uninstall and update but it still keeps crashing. I need to use the deco tool for an upcoming assignment, but it makes the program crash anyway, is - it is not available in the latest version?
in any case, the Flash is not admissible it takes forever to load and then I was advised to stop force but then when it opens in fact soon it after less than a minute it crashes.
Help, please!
Students in need!
Thank you!
Dana

CS6 has less features in all possible ways.

reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

I love the develop module, but I'm doing something wrong in the library
In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr. Please help (PC user)

And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

Help! Flash CS6 toolbar does not appear!

Hello, guys!
I need help. I recently installed Flash CS6 in my computer, but after I started, all I can see is this.
Note that the toolbar to the left of the screen is the brush, Eraser, etc... Also, this message is displayed after I have create a new document/starting the program. And I've looked everywhere and I don't know how to fix it. (Just so you know, I'm new in this...)
Thanks in advance!

reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

Flash CS6: Jerky Animation and Photo appears distorted while dragging

Similar Questions

Maybe you are looking for