Flash is not showing in IE7

Similar Questions

• Spry drop-down list is not showing in IE7

  I use Dreamweaver CS5, Windows 7 64-bit OS and tested in IE8 or higher and firefox everything works perfectly.  (except for IE7).

  the problem can be found at www.maxdailydeal.com

  the sub menu drop-down do not appear on IE7, can anyone help please.

  Thanks in advance!

  -max-

  Throughout this forum, we explain that you should stay away from the absolute and relative position elements. Yet once I would say STAY AWAY FROM ABSOLUTE AND RELATIVE ELEMENTS PACKING.

  To illustrate this, remove id = "floatdiv" in the menu container and you'll see that the menu works. OK, the menu do not seek as you wish, but this can easily be corrected with appropriate CSS.

  GRAMPS

• Flash video not showing on server

  Hi, wonder if anyone can help on this one. Turn around in circles. Don't know why, should be quite simple.

  I created a Flash video in Flash 8 and released and picked up in Dreamweaver 8. The published files have been sample.swf and sample.html SteelExternalAll.swf (skin). Publication parameters were: Flash SWF and HTML - Format. default settings of Flash with local playback security set to access local files only; default HTML settings.

  In Dreamweaver, sample.html is accessible via an iframe in test.php. In preview mode, everything is as it should be with the video showing. The problem is, when I download all of the files on the server, the video does not appear including the skin. Instead, all I get is the border of the iframe with a red rectangle showing where the video should be.

  I hope someone can help. Pulling my hair out on this one and get the feeling there is a simple explanation.

  Thank you in advance.

  you use a path to your local computer to load elaine.flv.  It is probably not what you want.  Download as flv on your server and change the path to the flv file in your flash.

• animation Flash is not rendered in IE7 w / 9.0.28 plugin

  Hello
  
  I have a web Flash Player on my blog:
  
  http://www.musiclibre.org/blog
  
  It works fine in FF but in IE7 (w / 9.0.28 plugin installed) it seems to be running (ie. music) but is invisible on the page?
  
  I tried points using a variety of different methods - SWFObject, directly integrate, etc... It does not seem to make a difference.
  
  Any ideas?
  
  Thank you.
  
  William.
  
  http://www.musiclibre.org/blog

  Problem solved. I was in the width in percentage. IE was not happy about it, so now I calculate the width of the container in JS, multiply it by my desired percentage and pass it as a number and it works fine.

• Why flash does not show image after sealing the video?

  Hello

  I have the background layerand Bkg_Image layer and layer of video. I have embeded flv movie on video layer. On stage, it shows all the layers, but when I test the movie it shows only background layer and the layer of video. I do not see the Bkg_Image layer. Please let me know the cause.

  The Actions layer has swf external loading AS3 that works very well. Only the problem with Bkg_Image layer which is imprortant to me.

  How to solve the problem? Help, please.

  Thank you.

  

  When I test the movie, I see that in the snapshot following (just the Background_Image and video):

  

  Hi This is simply because your background shows that frame 1 - put your video in a MovieClip or expand frames on other layers to the number of images, the video needs.

  Booya

• Problem with the new version of the flash player only showes a green background full screen with sound not picture

  New version of the flash player only showes a green background full screen with sound not picture

  'green' stuff usually indicates an outdated graphics driver: http://forums.adobe.com/thread/945765, even though I think that Windows 8.1 should have enough new pilots.  Check anyway.

• whenever I open firefox, I get the message: "Shockwave has stopped responding; "Difficulty, ignore, do not show this message" and it's driving me crazy. I have to wait and wait

  because he go away (sometimes 30 seconds) and I have tried clicking on "do not show this, ' and 'ignore' and others (all the possibilities.) Its driving me crazy and I think the move to Opera instead of Firefox. Can you help me? Thank you. MM2

  Hello

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

  Does this solve the problem? Let us know.

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• Finder does not show folders

  Hello

  I have a macbook Air 13 "bought in 2011, it has OS X 10.9 Mavericks installed and since yesterday the Finder does not work. When I open it it does not show a folder or a document, and it shows strange reasons (reminds me when my old Windows crashed).

  Here you will find some screenshots.

  Important to note is that if I use a projector I can find the files, then open them. Also when I upload an image on the internet and I have to select from the computer via the Finder (regarding the screenshots attached), it works well. In addition, as you can see from the screenshots, on top of the viewfinder, I can see the files and I can open them somehow. If I change the view of the researcher, song to a list, so I can't see anything and can not open files.

  I tried to restart the computer, turn it off and turn it on all by pressing the SHIFT key, but it does not work. Interestingly, when I force to quit the Finder application and I re-launch, for the first 10 seconds, it works, then it stops working.

  Do you have an idea what could be the problem?

  Alex

  

  

  Unfortunately I have a hardware problem with RAM or graphics chip.

  If your MacBook Air has been purchased after July 20, 2011, he probably has a material test integrated.  You can find starting with'd ' key.

  If it isn't you will need the installer original discs/flash drive that comes with it.    If missing, call AppleCare.

  You may also be able to get a disc to test material created with this link:

  https://github.com/upekkha/AppleHardwareTest

  If Apple Hardware Test reveals no problems, it is more likely that the RAM is an issue than any other thing: *

  http://www.macmaps.com/BadRAM.html

  * Links to my pages give me an allowance.

• Re: Realtek 8191SE card will not show up in Device Manager

  Part number Satllite L450D-128: PSLY5E-01301LEN, Win7 Ultimate 64-bit.

  Hello

  I can't use my wireless internet connection. The connection to the LAN works fine when connected via a cable.
  I have read all related topics to make sure that I'm not repeating a problem already solved, but I can't figure out the problem.

  The connection in the status bar indicator displays no network available.

  The wireless light on the front of the laptop does not illuminate.

  FN + F8 does nothing (even after delivered to zero cards flash with package etc.) 8191SE map does not show in the Device Manager and tried to add manually without success.

  I installed the last card wireless driver specific to the 8191SE yet once but nothing.

  I also removed the card and re-sitting there but still nothing shows in the dev Manager.

  I've also updated my BIOS and made sure the wireless is turned on.

  Any help would be greatly appreciated.

  Thank you!!

  Do the last ultimate test: install original recovery image that you got with the functionality of your laptop and check.
  If the material is OK that should be listed in Device Manager after installing the driver on the right.

• IDE DVD drive is not showing in BIOS, but projection in computer

  Hello

  I recently installed a new motherboard (Asus P5LD2 REV 2.01). ALMOST everything works fine - Windows 7 is installed and giving great performances. However, the IDE DVD drive does not work very well. It is connected to the primary EIDE channel on the motherboard and will NOT show in the main screen of the BIOS. However, it will show in the BIOS priority boot device, analysis of FDI and the F8 boot Menu. It also shows in COMPUTER and disk management. The IDE DVD Player loads and plays the discs very well! The main problem with it shows is not in the BIOS is this: after the computer, the computer has been turned off for a certain period of time, when I try to turn it on it restarts several times until the "Starting Windows" stage lights. The only way to solve this problem is by entering and leaving the BIOS, or entering the F8 boot menu and selecting HARD - which always does not restart. In addition, when the computer is turned off for a long period of time, sometimes I have no display or beep MESSAGE until I have turn works a few times, or press the reset button. The hard drive shows in the BIOS and is connected to the PRI_IDE (blue) port. I tried two CD-ROM drives, to replace the DVD IDE drive, and they're just right in the computer do not give any display or beep POST. The hard drive light continues flashing in the same schema, when an IDE CD drive is connected. Without a connected optical drive, nothing works. Y at - there no fix for the problem with the DVD IDE drive not no projection in the main screen of BIOS with random restart problem? Event Viewer displays an error of power core for every time that happened.

  Thank you very much!

  Brandon.

  My computer specs:

  Motherboard - Asus P5LD2 Rev 2.01.
  -Intel Core 2 Duo 1.86 GHZ Socket 775
  -4 GB DDR2 RAM
  -Microsoft Windows 7 Home Premium 64-Bit
  -Maxtor 6Y080L0 80 GB IDE Hard Drive
  -LG Super Multi IDE DVD Writer Drive GH22NP20 (not recognized by the BIOS, as mentioned above).
  -ATI FireGL Graphics card VGA 128 MB
  -POWER SUPPLY 350W

  Hi Brandon,.

  Certainly, this seems to be a problem with the hardware. Contact the manufacturer of your computer or a local technician for assistance on this issue.

  Feel free to respond if you need help with Windows in the future, we will be happy to help you.

• -I can, t install my Flash App error showed: administrator required parameters. I m running on MacOs, and I use my administrator account

  I can, t install my Flash App error showed: administrator required parameters. I m running on MacOs, and I use my administrator account

  Follow the instructions below:

  Exit the desktop application Cloud Creative and close Adobe applications.

  Follow the procedure below:

  Step 1:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  Step 2:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Enter'.

  / Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------------- - -----------

  Then launch creative Cloud desktop application and try reinstalling the Flash application.

• Flash does not not on IE11 Desktop on Windows Server 2012 R2

  I tried and I think I've read everything already posted about this, but all the solutions I've seen already correspond to my setup. Yes, I have installed Office experience. Yes, I turned off IE Enhanced Security Configuration. Yes, I can see Shockwave Flash Object in Manage Add-ons and it is enabled. I tried the manual update of Adobe and it says that it is already installed.

  OK, so with all these foundations of the road, I am at a loss to understand why it does not work. I don't get any error message, just Flash. When I go on YouTube, the player appears as a black box, but no video appears.  When I click on check now on Adobe Flash version checker (in: Flash Player Help), instead of reporting a problem or an old version number, this is what it shows:

  Your Flash Version	flashversioninfo
  Name of your browser	browserInfo
  Your operating system (OS)	OSinfo

  What is happening and how to fix it? I guess this is bound to make Windows Server R2 on IE11 2012, but I don't know that for sure. The same YouTube site works fine on Firefox via HTML5 (I have not installed Flash on Firefox), but this does not help in Internet Explorer.

  Thank you

  Colin

  ActiveX controls are enabled when I had the problem. In the end, I just did a full reset on IE, which fixed it. I should also correct a material error in my original post - Flash was not the cause of my problem, it was NOT HTML5 Flash video video was not working on YouTube. So, the real problem was that IE was launching the HTML5 version of the site instead of the Flash version. I don't know why or what I had done was causing the problem, but "Internet Options". Tab 'Advanced ' | "Reset" button... ", including the removal of the personal settings fixed whatever it is.

• Test the movie Flash Player not working not not in Firefox

  Flash demos at the following link do not work for me on Firefox, but work fine in Chrome and Safari: Adobe - Flash Player

  I also got an error on Tumblr that Flash has not been installed. I tried in safe mode, when 33.02 was later that it is an old problem, & also tested with the latest version 34.0.5.

  This screenshot shows what I see on the page of the Adobe Flash - just this dark, red color fill test no animation: http://oi61.tinypic.com/2r5ten6.jpg

  (Same exact image/animation with Flash 16.0.0.235)

  Chrome/Safari, I see this in an animation: http://oi62.tinypic.com/2qdsm13.jpg

  I tried to uninstall Flash using these instructions, rebooted, reinstalled and no change:

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html

  Safari and Firefox share the same Flash Player, so something is happening with Firefox.  Are you running any plugins of ad-blocking or anti-suivis?

  You could try Firefox > help > restart with disabled modules.

  If this does not work, you might just try to uninstall and reinstall Firefox.

• CC for flash does not work in Windows RTM 8.1

  CC Flash does not work in Windows RTM 8.1, by clicking on the icon of the program to inicialo it starts or comes to show the error code it does not start, what is the problem? It worked fine on Windows 8 and Windows RTM 8.1 now it won't start? I tried to run in compatibility with Windows 8 mode still doesn't work!

  It is a known problem with CC Pro Flash - generation of GM.

  This accident has been fixed in the update that came out recently. Please update to 13.0.1.808 version and it should fix this.

  Please answer if it persists after the update.

  -Reynaud