Flash Player 10 reads no audio from Youtube with Vista and IE

Since installing FP10, I can't do audio during video playback on YouTube. I am running Vista with SP2 and IE on a HP laptop. Flash 0 on my XP Desktop audio plays fine, so I think it's a setting on my laptop that needs to be changed to what it was before the upgrade to FP10... of ideas please? I uninstalled and reinstalled him FP10 according to the other messages on this forum, but without success.

I also feel that

[edit]

My problem was that I was not getting audio flash at all, including local publishes out of the IDE.  The problem was that he had stopped my Windows Audio service (for some reason any).

To check:

(Classic view): start > settings > Control Panel > administrative tools > Services >

(not classic): computer (right click) > manage > Services and Applications > services >

(one, above it, then): [scroll down to "Windows Audio"] > right click 'properties', tab general, set the startup type to manual (in the menu drop-down), and then click the Start button, on the next line.

Tags: Flash Player

Similar Questions

  • Inspiron 7000 point 8.1: how to mix the mic input with audio from YouTube (for DIY karaoke)

    Hello

    I want to use my Inspiron 7000 (wIn 8.1) as DIY karaoke machine.  Maybe there's karaoke apps or software, but they are usually expensive and the choice of songs is limited while on the mountain, there are clips from karaoke practically for each song and I want to mix the audio with a microphone on my laptop.  How I can do and it is possible at all?  Is there another solution?  Is it possible to add a reverb effect to the microphone entry?

    Thanks for the ideas.

    Hello. The recording of the sound Properties tab and right-click on your PC to open the context menu, and then click Properties.

    In properties, select the listen check "listen to this device". That will make your input mic through your speakers set. If you get your comments, and then click the levels tab and turn down the mic gain.

    You cannot add reverb on the side of the entrance. You can try to add it to the reading. Open the playback of the sound properties. Right click on the speaker to open the context menu and then properties. In properties, click the enhancements tab, and see what you have there. Below is a screenshot of an old computer with Realtek.

    As you can see he has an accessory called 'Environment' with fanciful names for the different quantities & types of reverb. I don't know whether or not your Realtek driver has a similar improvement. If so, I don't know if it is applied to the mic 'listen' function. If it works it will apply to audio from youtube too.

    If you can not reverberation through the configuration of the Realtek driver, then another solution would be to use a multitrack recording as the free Audacity program. You can save the audio from youtube on a track and your voice on another, and then use the effects of reverberation in the program on your voice.

    This version of Realtek in the screenshot has a function called "voice cancellation". Its purpose is to try to eliminate the voice of a record so that any record can then be a karaoke. I tried it and it's impressive. On a recording where the voice is at the Center, he gets completely eliminated. If the voices are mixed in a different way then it does not. If you want to access the feature, but your version of Realtek does not have it, download the program Audacity - it has an effect like this. You can open a record in the program, and then apply the effect of karaoke recording to eliminate the voice if possible.

  • Flash Player 11.9.900.117 not recognized by Opera and Firefox on Windows Vista (32-bit) SP2

    I use 4 browsers on my laptop Toshiba Windows Vista (32-bit) SP2:

    Internet Explorer 9

    Google Chrome Version 30.0.1599.101 m

    Opera Version 17.0.1241.45

    Mozilla Firefox Version 24.0

    I just downloaded and installed Flash Player 11.9.900.117, which is recognized by IE9 and Chrome from Google, but not in Opera and Firefox, even after closing the browser and re-start.

    How can I get Flash Player to work with Opera and Firefox?

    Thanks for your help.

    See you soon,.

    Joel

    There are two different versions of Flash Player for Windows (3 If you count Chrome)

    ActiveX which is ONLY for IE,

    Flash Player for other browsers which is for Opera, Safari and Firefox, and

    "PepperFlash" that is built into Chrome by Google.

    Download the tool or another browser version will have NO EFFECT on Chrome.

    Download of the ActiveX version WILL NOT install a plugin for Opera or Firefox because they do not use controls ActiveX - NO browser but IE uses not since about 2001.

    Download Adobe Flash Player for Firefox and Opera setup directly by clicking on the following link.

    Flash Player plug-in (all other browsers)

  • whenever I try to install adobe flash player on my laptop it will not let me and tells me that my settings do not allow me.how can I fix it.

    When I try to install adobe flash player on my laptop, it won't let me and give me a message telling me that my settings cannot me, how can I fix it.

    Download Flash Player
    http://get.Adobe.com/flashplayer/

    Flash Player installation instructions
    http://www.Adobe.com/products/flashplayer/productinfo/instructions/

    Uninstall Flash Player:
    http://kb2.Adobe.com/CPS/141/tn_14157.html

    ============================================================

    Troubleshooting:
    http://kb2.Adobe.com/CPS/191/tn_19166.html

    Flash Player doesn't work (32 or 64-bit)
    http://kb2.Adobe.com/CPS/837/cpsid_83715.html

    Troubleshooting player stability and performance
    http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

    Flash Player Support Forum
    http://forums.Adobe.com/community/webplayers/flash_player

    ============================================================

    Flash Player 64-bit: http://kb2.adobe.com/cps/000/6b3af6c9.html

    You can install Flash Player 11 on 64-bit Internet Explorer on Windows 7.
    http://kb2.Adobe.com/CPS/000/6b3af6c9.html#main_Install%20Flash%20Player%20on%2064-bit%20Internet%20Explore

    J W Stuart: http://www.pagestart.com

  • Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

    Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

    Try to download from this site:

  • XPS from Dell with Vista system

    I have a XPS from Dell with Vista system.  When the computer enters standby mode, it continues to run and does not respond when you click the mouse or press a key on the keyboard.  I have to turn off the computer and then it takes about 20 minutes before it will start up.  He must analyze the disc and then says windows is not stopped correctly.  So sometimes, I have a blue screen that says that windows has automatically stopped because of an error.

    My system is only about 3 weeks.  This just started happening.  I have not installed any new hardware.  Here is a meswsage error I get

    Download and install the driver for Windows Vista

    This problem was caused by a missing driver for Windows Vista, which was created by Microsoft Corporation.

    I check new updates, but he says that my cumputer is up-to-date.  Can someone help me please.  It is very irritating that this is happening.

    SFC/scannow cordially, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  • I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

    I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

    Hello

    You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/

    See you soon.

  • I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

    I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

    See this article would allow:

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

  • update from xp to vista and lost my portable device in the process. How can I get that back?

    update from xp to vista and lost my portable device in the process.  How can I get that back?

    Hello

    Check with the manufacturer of the laptop to the latest vista drivers and software for your model

    If this does not it, contact them and ask them if they support your webcam when using vista

  • After you have installed Mozilla Firefox with Adobe Flash Player 11.6 20.0, videos YouTube do not load correctly.

    Videos YouTube has of worked before installing Adobe Flash Player. Once installed the screen flickers, after a second, rewind at the start, then plays normally. This only happens when I use Internet Explorer. I reinstalled Mozilla Firefox and Adobe Flash Player several times but nothing seems to work. Decommissioning of Adobe Flash Player does not work either. It seems that Firefox is the problem, but I'm not completely sure.

    You can check for problems with the latest version of the Flash plugin and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • disable the safe_mode in Flash 11.3 and later versions
    • turn off hardware acceleration in the Flash plugin
  • My BDDVDRW drive will recognize is no longer read the audio CD, but both DVD and BD

    I have a HP pavilion dv6 under Windows Home Premium with a HP BDDVDRW CT40N. I have never had any problems with the optical drive. About 2 weeks ago, I started ripping of audio CD on my hard drive using Windows Media Player. I pulled about 15 CD over the 2 weeks. Then all of a sudden the drive read audio CD - I put a CD in and nothing, even after hours. If I click on the player it ejects and answers please drive inset.

    So I thought it was the CD and inserted other CD, even the ones I had just ripped - nothing. But it reads the DVD fine; I just saved a DVD with it.

    The machine is about 5 years old, but it works well, so I thought maybe it was the reader. I have another computer; It only a little more than a year, with a HL-DT-ST BDDVDRW CT40N and running Windows 10. I started to rip from CD with this computer also with Windows Media Player. Guess what - same thing.  I was able to extract only 3 CD before he showed the same symptoms: can't see CD; no problem with DVD.

    Finally, I went to my wife's computer, a different HP running Windows 7 with a DVD - RW disc. This time, think of some sort of virus or malware may be responsible, I made sure that there was no Internet (not ethernet WiFi or Bluetooth). I ripped a CD and then the same thing.

    All three computers has failed using different CD - it wasn't the same CD that was torn apart last before failure.

    I doubt very much that three different computers with different symptoms of operation and different readers might undergo the same material unusual problem in few days after execution of the software even on different CDs. There must be something about the use of this extraction software (Windows media player) or disk characteristics of driver that blocks the CD (apparently after extraction).

    I'm only moderately tech savvy, but successfully, sometimes after a considerable effort, more than anything I tried. I have had no success with this (towards even a problems prior restore point) and am at a total loss.

    Help, please.

    While they inspected, CD is not detected by the computer. You can do the following steps the solved the problem.

    1. Scan of the SFC
    • Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
    sfc/scannow

    2. run the disk check in Windows 7

    • Open the Start Menu and click on the button of the computer on the dark right side.
    • Right-click the hard disk you want to check, and then click Properties.

    3. click on the Tools tab and click the check now under error checking.

    4. you will now see this window. Follow the steps below for what you want to do.

    5. to only scan the disk for errors

    Note: This will give you just a report if there are drive errors or not and will not attempt to correct.

    • Let off both boxes, and then click the Start button. (see screenshot below step 4)

    6. only scan and try bad sectors recovery

    Note: this analysis tries to find and repair errors on the hard drive itself, physical and it may take much longer to complete.

    • Uncheck the automatically fix file system errors . (see screenshot below step 4)
    • Select the search for and attempt recovery of bad sectors .

    7. only scan and trying to automatically fix errors

    Note: This will automatically attempt to repair problems with the files and folders that the scan detects.

    • Check the automatically fix file system errors . (see screenshot below step 4)
    • Uncheck the search for and attempt recovery of bad sectors .

    8. to analyze automatically try to fix the errors and bad sectors recovery

    Note: This will scan for file errors and physical errors (steps 6 and 7). It will attempt to repair problems with the files and folders and retrieve physical errors.

    • Check the automatically fix file system errors . (see screenshot below step 4)
    • Select the search for and attempt recovery of bad sectors .

    9. Click on the Start button and is not 10 or 11 below depending on the whether the drive is currently in use or not. (see screenshot below step 4)

    10 if the selected hard drive is not in use, you will then see to check the startup disc check the disc now.

    • When the analysis is complete, you will then see

    results. Click close.
  • Click OK. (see screenshot below step 3)
  • Stop, you're done.
  • 11. If the selected hard drive is in use, then click on the schedule the disk check button. (see screenshot below)

    Note: If the hard disk that you selected in step 2 is in use (for example, the C: drive or the partition that contains Windows 7), you will be prompted to reschedule the disk check for the next time you restart your computer.

    • Restart the computer.
    • At startup, you have only 10 seconds to press any key to cancel the check disk of measures 7 or 8. (see screenshot below)

    • Once the scan is complete you will see a report similar to this below briefly until the computer restarts automatically.

    If the problem persists, you can run repair for Windows 7.

    Brand of kindly as answer if that answers your query. Let us know how it goes.

    Thank you.

  • I can't download adobe flash player on my program of window 7 with 64 bit

    Can help me down load flash player on my windows program 7. I have try several times but for some reason any does not install

    Unless you have changed specifically things, Internet Explorer 32-bit is the Internet Explorer browser by default even if you run the 64 bit version of Windows.

    A look at Internet Explorer from inside.
    http://blogs.msdn.com/ieinternals/archive/2009/05/29/q-a-64-bit-Internet-Explorer.aspx

  • Flash Player 11.3.300.262 works only with Firefox. I think I found the problem.

    * Flash Player 11.3.300.262 does not work with Firefox. I think I found the problem.*

    Millions of people got off work & turned on there computers recently to discover that Firefox isn't playing videos or flash content. Like me, millions of people are randomly searching the Internet in an attempt futile and frustrating response. Unfortunately, many of these people will simply stop using firefox & consider a browser glitch, unreliable.

    This happened to me a few days ago. I started my computer and got a pop-up from Adobe saying that I need to update my flash 11.3.300.262 drive. I always thought that Adobe as being a reliable software company, so I clicked on it with confidence that things will take care even more fluid. To my horror, I have relalized that just after the update, my main browser, firefox has been destroyed. Then I went on the frustrating process of uninstalling, reinstalling, running virus scan, search the Internet like a lost child. I thought, "this is why I hate the update of things, because the updates always seem to change things you don't want to change, and there always seems to be a problem with updates." I generally update software month after release, because microsoft & all other software vendors always seem to not test it stuff properly before releasing. We must look a glitchy computer until the next update fixes it. Well, that is my rant. Now, let me discuss the problem I found.

    Problem:

    What I did, go to my menu firefox extensions, I disabled the 11.3.300.262 & I have reactivated the previous flash player. After that, everything worked perfectly again. Then one today (a week later), I turned on my computer and my firefox wasn't playing videos or flash content again. I went into my menu parts of firefox again, and I discovered that my old flash drive has been removed & this 11.3.300.262 new glitch had been activated. Why adobe feel the need of in my computer & automatically delete and update my flash drive. Now, it does not work. It IS REALLY FRUSTRATING!

    The question that I discovered:

    "RealPlayer" is the most popular video show & it's installed on millions of computers. For some strange reason Firefox doesn't want its users to use Real Player. Specifically the RealPlayer Record Plugin 15.0.2. I also discovered that my Plugin 15.0.2 Record of the browser has been disabled automatically when the Adobe 11.3.300.262 is automatically updated too.

    -Maybe this could be because of some conspiracy of copyright law to stop people from downloading videos from the web.

    -Maybe firefox wants people to use it download add-on instead of RealPlayer downloader.

    I don't know what ther reason. But what I know is no one will remove it RealPlayer to computer there is just to use FireFox. We can just use Chrome or Internet explorer. I took advice of people with disabilities the Extention of RealPlayer, FireFox and Adobe. I also went in my RealPlayer preferences options, but there is no option to disable the download of FireFox for registration. BECAUSE I have ALREADY DISABLED THE add-on menu FireFoxes.

    Solution:

    Step 1: Adobe needs to update all computers with the previous flash player. In this way we can choose to activate the previous flash player in our FireFox. or wait for a new update fixes the problem with firefox.

    Step 2: Adobe & FireFox need to get together and go back to the drawing board. They need create an update that actually works on computers with of Real Player installed on them. I don't like that the company made the update. All I care about is if it works. Thank you.

    Oh yes, Im market FireFox 13.0.1, Windows 7, computer HP, Real Player is up-to-date.

    FirefoxAdobeNotWorking wrote:

    We all that business leaders like every penny of profit and there ready to layoff anyone to keep this benefit. Suffice to say.

    Mozilla is a not-for-profit organization, and Adobe will not loose anything if you switch to chrome or IE.

  • The new flash player does not work why? IM with internet explore

    IM with internet explore and I downloaded the new installation of the flash player, I try to watch the video on youtube, of the game and other things.

    He told me just to get the new flash player, I don't know why this is, can you please help me?

    What version of Windows do you have? XP, Vista or 7? And it is 32-bit or 64-bit?

    If you have Vista or 7, you use IE8 or IE9? If IE9, please see this doc: http://forums.adobe.com/thread/885448

  • Flash Player 11 constantly crashing on every website with Flashcontent...

    Hello

    I have problems with the latest update of Adobe Flash Player to release 11. I'm on a Mac (10.6.8) the 64-bit kernel. For the moment, I installed Flash Player 11, every website with Flashcontent crashes. This also happens in Chrome, not just Safari or Firefox. I did everything what Adobe offers as possible solutions. Do with the uninstaller uninstall, then install it fresh. I got a glance of the folder Plugins from the Internet to make sure that all got deleted properly. But the new facility will not work.

    What works is to uninstall Flash Player 11 and reinstall Flash Player 10.3. Then, everything works like a charm. Well well... except in Chrome, of course.

    As a last piece of information: I never had all versions beta or alpha of the installed drive.

    Can someone help me please? Someone else this problem?

    Concerning

    Alex

    Thank you very much, Alex, to provide the fonts for me. I'm not on the Flash team, but am in the development of Type, so my interest for fonts and my experience that 'unknown' policies can be malformed. I use a MacBook Pro 17-inch Mac OS x 10.6.8. I installed the fonts in my ~/Library/Fonts folder, and Flash block now on a regular basis. A screenshot of what I feel chrome is attached. So, if you simply remove the KozGo*.ttf files (use ' % rm ~ / Library/Fonts/KozGo*.ttf ' to remove them), the problem may disappear.

Maybe you are looking for