Using the cardboard

Similar Questions

• Using the markup with iPad Pro

  I open a pdf file in apple mail and used the markup and saved. It is not in the project and seems gone. Help?

  Check your iBooks app.

• Verification request uses the wrong place

  I can't connect my mac to iCloud after changing my password.  Request for verification on the phone uses the wrong place.  It is safe to accept access?

  What do you mean by 'place' in 'request for verification on the phone uses the wrong place?

  You use two factor authorization?

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• The Iphone needs to cool down before using the flash

  Hello

  I see the message on my Iphone 5 s(IOS10-Updadte) camera-"The Iphone needs to cool down before using the flash"

  Please help me solve the problem.

  Hi sangani53,

  Thank you for using communities Support from Apple!

  This message indicating that your iPhone must cool before using the flash indicates that the temperature of your iPhone is passed to where certain features will be disabled.  Once you bring the temperature down, the features should come back.  Take a look at this link for more information on updating your iPhone in the operating temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• iPhone 7 more sudden that it recharges when you use the camera

  My iPhone more brand-new 7A they weird sudden reboots when I start the camera application. I hear the camera application, point, shoot the picture and everything becomes black and the phone made a quick restart. This means that it takes only about 3 or 4 seconds for the phone to come back alive and operational (I have to return my password instead of use the fingerprint).

  This happens too often, but not always. It can happen at the launch of the application of the camera itself or when you try to use the camera via Whatsapp or Facebook Messenger for example.

  Is this a known bug or should I consider taking the phone...

  You can try to reset your device. Press and hold On / Off and the Volume key down until you see the Apple logo.

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• How can I access Siri on my iMac without using the icon?

  How can I access Siri on my iMac without using the icon?  Can I say "Hey Siri"?

  There is no option "Hey Siri" on a Mac because they do not have the necessary pickups. You must use the icon in the menu bar or Dock.

• BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

  After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

  Hey hernj103,

  Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

  Use Time Machine to back up or restore your Mac

  Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

  Try safe mode if your Mac does not end commissioning

  If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

  See you soon.

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• Use the second router to extend the network to Time Capsule

  I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

  I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

  Yes. That would be the basis of a network of mobile type.

  The key for a roaming network parameters are:

  • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
  • All other routers used in a network of roaming must be reconfigured as a bridge.
  • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
  • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

  If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Should not really which is the main in the roaming network.

  I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

  If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

• Is no longer able to navigate using the Remote app

  I'm suddenly is no longer able to navigate (left, right, up, down) on the Apple TV using the remote app. I also tried with the new application. I'm t able to select the current item and return to the previous menu using button "Menu".

  given that it could also have been a problem with the display of my mother's phone, I scroll on different applications etc and it works fine. So it seems that it is an application (or Apple TV) problem.

  any ideas? I use an Apple TV, I bought 3 years ago.

  Thank you!

  Make sure that the software on your TV is up-to-date. Perform a restart of settings or by unplugging the power cord for 30 seconds. Alternatively, you can perform a reset of settings.

• Can I use the watch on my right wrist?

  I find myself handed is it possible to use the watch on my right wrist and the button to the left without the screen being backwards?

  Hello

  Watch Apple Watch can be worn on each wrist and with the buttons on each side.

  To change the configuration, on your iPhone, in the application of the watch, go to: My Watch (tab) > General > shows the direction > choose favorite wrist and the side buttons which will be located.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.