Flash Remoting on local development box

Similar Questions

• Flash remoting vs. Flex vs CF

  Reading the product documentation, it's really hard to say what the CF has and what Flex and the server to access remote flash would provide on CFMX7. Does anyone have a difinitive answer on that?

  SJ11 wrote:
  > I was talking about the remote server flash:
  > http://www.adobe.com/products/flashremoting/ made this server provide actually
  > nothing CFMX7?

  If you use flex or flashforms, 'no', but I guess that really depends on what you
  you want to accomplish. w/cf7 you get painless flash remoting out of the box, free.
  I don't know enough about the flash to tell flash remoting is not worth.

  > I just wish that these tools were not so expensive. I'd be much more apt to use
  > if I really knew what they could do for me.

  Flex itself is free but the flex builder ('IDE' built on eclipse) fees
  about $500US, but I think that it is worth if you do a lot of this kind of interface
  work. If you are just getting into this kind of thing that I would say flexible
  instead of "raw" flash or CF flashforms.

• I have a problem with debugging in a local development environment.

  I'm having a problem with my local development environment.

  I have version 10.3.5 WebLogic Server on my laptop and I am using Eclipse v3.8.1 as my IDE.

  I built a server in Eclipse, I imported a .war file and place the file properties to point to an Oracle database, not on my laptop.

  I built the project and added the server.

  But when I tried to start the server in debug mode I got this message. :

  Unable to connect to remote VM. Connection refused.     Connection refused: connect

  As the Weblogic Server is loaded on my laptop and I tried to run the server in the Eclipse Server view Debug

  Why it says "Failed to connect to remote virtual machine".

  Why he thinks I'm trying to debug remotely?

  I thought I was set up for local debugging:

  Hello

  To enable the debug option in Weblogic, please add the following lines (in bold print) to startWebLogic.cmd in bin directory - your domain

  Set JAVA_OPTIONS =-Xdebug - Xnoagent - Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n % SAVE_JAVA_OPTIONS %

  And in eclipse change port configuration debug as 8453.

  I hope this will work!

  Kind regards

  Prateek Gupta

• Flash Remoting works does not in CF 10

  Have us use Flash Remoting for years and now find while testing 10 CF on a development server, it no longer works.

  In particular, I get a 404 error when you try to access to https:// {ip address} / flashservices/gateway.

  I have already confirmed that remoting is enabled in the administrator and follow the steps in the documentation (http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec1896 9 - 7ffa.html).

  Any advice?

  It may seem absurd, but the solution was to add a slash ("/") at the end of the URL of the gateway:

  https:// {ip address} / flashservices/gateway.

  This was not required in earlier versions, but apparently it is in CF 10.

  Once I added this character to my code, Flash Remoting has worked in my application, once again.

• ussue with application.cfc in flash remoting

  < cfproperty

  output = "false".

  Hint = "I defined the parameters of the application and managers of events." >

  Hi, im using flash remoting to call CFCS and I want to use the application.cfc to determine the environment (the APPLICATION.environment defines a DSN that is used in flash to CFC calls).

  However, whenever I call a cfc with the app.cfc, I get a CF error that I can't debug because CF builder is uselss to connect to debuggers. Any ideas?

  <!-define the application. ->

  < cfset myIdName = hash (getCurrentTemplatePath()) / >

  < cfset this.applicationTimeout = createTimeSpan (0, 0, 1, 0) / >

  < name cffunction output = "SystemFramework" = "false" >

  < cfset path = cgi. Server_name & cgi. SCRIPT_NAME >

  < cfset serverAnd2Dirs = reFind ("([\w-]+/\w+/\w+)", path, 0, true) >

  < cfset match = mid (path, serverAnd2Dirs.pos [1] serverAnd2Dirs.len [1]) >

  < cfset var ID = createObject("component","DomainEnvironmentIdentifier").init (match) >

  < cfset var environment = createObject("component","Environment").init (expandPath('/') & "coldfusion\config\environments.xml.cfm") >

  < cfset environment.use (identifier.currentEnvironment ()) >

  < cfset APPLICATION.environment = this.environment >

  < / cffunction >

  < / cfproperty >

  N ° the scope is used to access the application-scope variables.

  I think you should read the operation expanded in the CF.  Read this entire section of the documentation:

  http://help.Adobe.com/en_US/ColdFusion/9.0/developing/WSc3ff6d0ea77859461172e0811cbec22c24-7ff2.html

  I can't guess where in your code you put the CFDUMP, so I can't really comment on the rest.

  --

  Adam

• Flash remoting and session management

  Hello

  I'm developing an application in Flash and AS3 and I use ColdFusion 8 for flash remoting. Some screens will be used by only 1 user. I googled many times and I had a few pages containing topics 'OnSessionStart', 'OnSessionEnd' and 'OnRequest', I tried to use my CFCs but makes no sense. I want to erase the State of the use of the screen in my application. If I can catch the event 'session-end', I can clear the field of use of database. So if a user closes the browser window not correctly, the value of the field will be handed over to zero and one other user can use the screen safely.

  Help, please. Thank you.

  How do you currently user and session management, then? It is entirely in Flex? To make the session management in ColdFusion, you must have either an Application.cfc (or an Application.cfm... Application.CFC is recommended, however) file in the same folder as the portion of your application ColdFusion. The CF server will be automatically call Application.cfc before you run some of your pages on cfc or cfm and run automatically to the SystemFramework, OnSessionStart, OnRequestStart, OnRequest, OnRequestEnd, OnSessionEnd, OnApplicationEnd or OnError methods you defined in the Application.cfc file. SystemFramework fires when the CF application is first started, OnSessionStart is triggered whenever a new session is started, OnRequestStart is triggered at the beginning of each page request, etc. You don't need to define all the... in my applications, I used SystemFramework, OnSessionStart, OnRequestStart, OnSessionEnd and OnError defined. There is also no need to worry when or how call one of these methods the CF server that will do for you. All you have to do, is essentially, describe what you want to happen when a session starts or ends, when a page request occurs when the application starts, etc. and CF will call the appropriate method that you hit every event. A simple Application.cfc file might look like this:

  
     

  
     
     
    
     
     
     
         
         
         
     
     
     
     
         

  
         
     
     
     

  
         
        
         
     
     
  

  Does that help? Also, I would recommend that you read the section of the livedocs framework of the CF Application and how to manage the session data and application.

  ~ a

• To create the local development environment

  Hello
  
  I need to create the local development environment
  
  There are two options:
  
  1 gateway pl/sql embedded
  2 oracle xml db http server
  
  * 1. how to know the configuration that I use to create the local development environment? *
  
  After installation:
  
  * 2. how to configure? *
  
  
  http://hostname/ReportServer: port/apex/apex_admin... for embedded
  
  or
  
  http://hostname:port/pls/Apex/apex_admin...for oracle xml db
  
  
  
  from the tutorial, I just couldn't understand.
  
  for example, apex is defined in the configuration file? ... How to find?
  
  
  I'm stuck.

  Hello

  You have database XE, so you have before installation EPG. You don't need to worry about installation of DAD.
  Check the links I posted.

  The only thing you need to do is to allow remote clients, if your database is not in the same machine where you try to access it.

  If you go to Apex of the same machine where is database, point just your browser to http://localhost: 8080/apex

  BR, Jari

• Try to use Flash Remoting with CF8 and Flex 3

  I really hope someone can help with this. I googled to death for two days and found nothing. I'm at my wits end. I installed CF8 on Windows XP Pro on IIS5.1 with several sites. I am also using Flex 3. I'm trying to get a simple helloworld application to work with a flash remoting CFCs. When I run it, in the error dialog box, I get this error include:
  
  [Error CPP faultString = "Send failed" = "Client.Error.MessageSend" faultDetail ="faultCode" Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: failed: url: ' http://localhost/flex2gateway/' ' ]
  
  I tried to connect to http://localhost/flex2gateway/ via the browser and I get a page not found message. Note that I had to change the root directory in IIS to point to my new site, so it is no longer the default site. If I change back to the default, I find this file. I can't understand for the life of me how to get this url to work in the new site? I also tried to add the JRunScripts virtual directory in my new site like this proposed site and he can still find it.
  
  http://www.frenches.com/blog/index.cfm/2007/5/7/Flex-ColdFusion--dont-make-me-have-to-SEPA rate - you two
  
  Surely someone else has several sites and knows how to solve this problem?
  
  Thank you!
  Holli

  Hallefrickinglujah! I finally got to work. I'll post the answer hear to help someone in the future. For sites you create AFTER installing CF8, you must create the JRunScripts virtual directory as described in this article: http://www.frenches.com/blog/index.cfm/2007/5/7/Flex-Coldfusion--Dont-make-me-have-to-sepa rate - you two

  Make sure you just after you create it, you go into IIS and give permissions on Scripts and executables - run it is a drop down in the properties of the virtual directory dialog box. Good luck!

• I can trigger a flash remotely from the EOS Utility?

  Hello. I am a total newbie, so forgive me if my question is very basic or confused.

  I just bought a Rebel T5i (literally, my first ever buy SLR) and have been using the EOS utility to be able to "live view" on my desktop screen. It seems to work pretty well.

  However, I am interested with the addition of a flash remotely as a Speedlite flash, to be placed between the subject and background. Will be a remote flash correctly from live view EOS Utility work? Should it be a Speedlite flash, or can it be a third flash?

  I'm not too considered with flash quality as much as I just want to be able to take pictures with the EOS Utility live view, with the remote flash fires to light a backdrop behind the subject.

  Thank you!

  As Ernie points out... the computer simply tells the camera when taking the shot.  If the camera has a flash, then the camera fires the flash when he takes this one.

  But your question is loaded with some nuances and it is not just a direct response.

  A Canon T5i has the ability to fire distance a Canon speedlite if three conditions are met:

  (1) the flash must support E - TTL

  (2) the flash must support E - TTL mode 'slave' (and that the mode must be enabled - it will not be enabled by default.)

  (3) flash must be direct "corridor" between the camera and remotely.

  The camera itself needs to be said that it is in a mode where the flash pop up on the device will work as a 'master' to trigger a remote flash.

  But you mentioned that you wanted to put this flash to distance between a subject and the context - which implies that 'line of sight' is not possible.  Who calls other WIRING.

  You can learn a lot about flash systems Canon E - TTL of the "Manual of the Speedlighter" (by Syl Arena), but this book has not been updated (as far as I know) to include systems flash triggered by Canon's new radio.

  To do this with the Canon gear, you want a transmitter of radio ST-E3-RT (which amounts to the hoof as a flash camera) and then use a flash Canon Speedlight with a suffix 'RT' such as flash 600EX-RT (flash light) or the new 430EX III - RT.  All products of "RT" communicate by radio and do not require a line of sight direct.

  It is also possible to do with budget gear..., you can get a pair of transceivers trigger... we're going on the device and the other goes hand in hand with the remote flash.  These radio triggers are not "E - TTL", which means that the camera and the flash will not be able to communicate and negotiate the amount of energy must be used for shooting "on the fly" (as can an E - TTL flash).  This means that you will need to manually set the power level you want to use.

  Having to use manual flash should not be terribly difficult to learn.  The flash and the camera usually automatically set your power level, as it would for E - TTL flashes.  You control the light, by adjusting the power level of the flash (manually) or by moving the flash closer or away from your topic (or using the flash light modifiers) more, or by adjusting the opening of the camera.

  This works well in a situation of type 'studio', where you can control the power settings.  But for photography of the 'event' where you have to shoot on-the-fly and you "-over" If rush you the shot, you have to learn the flash behavior before the shooting. For me, it means creating a table which indicates (for any given on the flash power level) f-stop, should I use any flash-to-subject distance given.  I used usually non-zooms at this time, but I knew that, for example, a shot of 'dance' a couple of size - up to (what we call a "half coup" because we have only half upper body of our subject) was f/16 at ISO 100.  A length of 3/4 shot (essentially from the knees upwards) was f/11.  A shot of 'length' was f/8, and a group shot can be f/5.6 or even f/4.

  It necessary to the good days past tests and completing such a table.  You won't have the time to refer to such a table, but I mentally memorized by distance because the subject framing was a good consistent indicator of distance.  (it is a bit more complicated with zooms because you can change the subject framing without changing the distance).   But in the end, you find yourself in a situation where you go back to a subject at a demonstration, the frame of the shooting, set the aperture value and capture the image and know that you nailed the exposure even if the whole system is manual.

  There are a lot of tutorials on the use of the manual of flash and inexpensive triggers to the Strobist blog (strobist.blogspot.com).

  I use the Canon system.  I use the Canon ST-E3-RT trigger a few flashes 600EX-RT.  The system is rock solid... it always works.

• CF10 Flash Remoting

  Hi all

  upgraded to 9 CF10 this week and just realized that Flash Remoting no longer works.  No idea how I allow in CF10?

  Thank you

  Hi Phil, file in ColdFusion10\config\wsconfig\1\uriworkermap.properties

  / cfformgateway / * = cfusion
  / CFFormGateway / * = cfusion
  / flex2gateway / * = cfusion
  /flex2gateway = cfusion
  / cffileservlet / * = cfusion
  / CFFileServlet / * = cfusion
  / cfform-internal / * = cfusion
  / flashservices/gateway / * = cfusion
  Gateway/flashservices / = cfusion
  / flex-internal / * = cfusion
  rest / / * = cfusion
  /*. CFML / * = cfusion
  /*. MXML = cfusion
  /*. As = cfusion
  *.cfm = cfusion
  / * .cfm / * = cfusion
  *.swc = cfusion
  /*. CFML = cfusion
  /*. CFC = cfusion
  / * .cfc / * = cfusion
  /*. CFR = cfusion

  Add the line in bold above. I would say take a copy of uriworkermap prior to the amendments.

  Restart the IIS services and restart CF tho maybe restart IIS should be sufficient to apply the change.

  Test your flash.

  HTH, Carl.

• THEY Flash Remoting request limit introduced with Coldfusion 9?

  Hi all

  We've just been our Coldfusion servers since 8.01 CF CF 9. They run Win 2008. On servers that provide the Flash remoting backend for a Flex application, we provide, we ran into trouble.

  After upgrading CF 9 noticed that during busy when many customers Flex have been completed, we connect, we seemed to have a strict limit of 25 Flash Remoting running queries, despite the much higher limits (in fact 150) in CF Admin.

  We first thought that it was a problem with the fact that Blaze DS now ships with CF 9 (rather than a separate installation) we decided to roll back the installation of CF 9. This, unfortunately, has not worked and we were always stuck with out strict limit of 25 applications for Flash Remoting.

  Then looking at IIS we noticed the CF9 ISAPI filter was installed yet (after we ran the part of installing Web Service Configuration). Who took the CF 8 were re-run and all of a sudden the strict limit Flash Remoting has disappeared. So it seems that it might have had something to do with the wsconfig CF 9 (C:\ColdFusion9\runtime\bin\wsconfig.exe)

  If anyone has had this problem or does anyone know where these hard limits are configured in IIS?

  Any help appreciated!

  @ciaranarcher (and other interested parties in the present), I posted what, in my view, is the solution on the stackoverflow website where it had also posted the question:

  http://StackOverflow.com/questions/3037390/IIS-Flash-Remoting-request-limit-introduced-wit h-coldfusion-9

  Let us know (here and there) if it is the solution for you (and others). Thank you.

  /Charlie

• Problem by changing Flash Remoting to Webservice

  I have a request using flash remoting with the Flash Remoting enabled under the Flex option on the administrator see I need to move this application to a server that has flash remoting, but not the new Flex option.
  
  The CFC returns a query, when I use http://hostname/flex2gateway/ the event.result is returned as an ArrayCollection collection FlashRemoting (that's what I want because I'm adding to a DataGrid, but when I change to webservice the event.result is of type array.) When I use flash remoting changing endpoint at http://hostname/flashservices/gateway
  I'm getting a TypeError: Error #1034: Type coercion failed: cannot convert Object@4e2a4c1 in mx.messaging.messages.ErrorMessage.
  
  Basically, I need to know how to call a webservice or flashremoting using http://hostname/flashservices/gateway , which returns a query for use with a datagrid control. If anyone can give me some advice, I'd appreciate it.

  Web Services uses types of basic, arrays, strings, etc.
  Communication to remote/Remote objects using these basic types with
  complex data types, works of art, ArrayCollections, etc..

  When you come back to the table of your web service, cast to an ArrayCollection collection
  and whether you use it before you use it.

  var MonTableau = event.result;

  myAC:ArrayCollection = new ArrayCollection (myArray);

• Flash remoting components

  Hi all
  I'm learning AS 3.0. I have a question can be stupid question :)
  
  Do we need to install the flash remoting for AS3 components as we need to have in AS 2.0.
  
  Thank you
  
  
  
  

  N °

• When Adobe flashplayer wants to store data firefox won't let me respond to the dialog box? / flash player fiadobe settings dialog boxes not reponding

  After you install Adobe Flash 14.0.0.0.25 when I go to a site that wants to store data locally, I am presented with a dialog box that gives me options: allow, deny, specify the isite. However, no matter what I click nothing happens. It's almost as if Firefox is not 'see' the click. I went into settings Adobe manage and added that the site as being approved, but it did nothing...

  Best is to allow a Flash local storage in the world and use the default values.

  See also:

  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  Global storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

• where we get Networkid, Accepoint on the remote control, local to the tuxedo Server

  Hi xu he
  
  We had the Client Code written in c language, his work when sending messages from Tuxedo
  He was earlier developed by others. Now we must develop with Jca adapter, for those who we need
  Networkid and Accepoint of the remote and the local, please suggest me where I
  Can get this information to the existing code, I got the Tuxedo of the remote computer Server Code and client code to the c language
  
  \tuxedo (main folder)
  -Ben
  -include
  -inventory
  JRE-
  -lib
  -regional settings
  -udataobj
  -uninstaler
  -registry.xml
  -set.env
  
  I need to use these DM_LOCAL_DOMAINS, DM_TDOMAIN, DM_REMOTE_DOMAINS, DM_LOCAL_SERVICES.
  in the configuration of the jca adapter, where can I get this information to the code existed, please suggest me.
  
  Thank you & & best regards
  Olivier

  Hi Olivier,.

  You have described the structure of the directory is the Tuxedo installation directory. What you are looking for is the application directory where are the application configuration files. If the application has already been configured to use the gateway of the field, there will be a file containing configuration areas. If you have configured the environment application (TUXCONFIG, TUXDIR, DMCONFIG, variable of environment, etc.), you can use the dmunloadcf command to get a text representation of the areas configuration copy if you can't find the original source for it. Which will contain all the information of domain configuration you must configure the JCA adapter.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo