where we get Networkid, Accepoint on the remote control, local to the tuxedo Server

Similar Questions

• Tecra M1: Where to get a copy of the recovery CD

  Hello

  I have a Tecra M1 Portugal and I need to reinstall the OS in the machine.

  My problem is that I lost the cd that cme with the computer. I still have the key of Windows XP but I do not have a CD with the operating system.

  Is it possible to get a copy of the original CD supplied with the computer? I have the Toshiba Tools CD.

  Thank you very much
  Francisco

  The Toshiba product recovery CD can be ordered from the local ASP.

  I recommend you contact the ASP in your country (Portugal) and order this CD.

  As far as I know it s not very expensive!

  Good bye

• get ip address client computer remote control panel

  Hi guys,.

  I was wondering if there is a way to determine the IP address of a computer connected to a remote panel vi? I have a vi that can be controlled via the remote control.  I want to be able to send files from my computer to the server computer. I have written a Subvi ftp, but quickly learned why they call it "remote panel.  Basically, the idea is to get the ip address of the computer connected to the remote control.  When the user selects the files on their computer, I want to ftp the files they choose on their computer to the thread to the host of the remote panel.

  See you soon,.

  Shivels

  Hi Shivels,

  Thanks for posting on the forum of National Instruments.

  You will find all the information about what you want to implement in this link.

• GET VPN - error on the key server

  Hello:
  When I apply a Crypto GDOI card to outgoing interface on the KEY SERVER, I see the following error message:

  * 1 sep 19:46:07.707: % SYS-3-MGDTIMER: uninitialized timer, set_exptime, timer = 493007 B 8. -Process = "Exec", PW = 0, pid = 202, - traceback = 0x43220180z 0x43E49EA0z 0x43D8A89Cz 0x43DAE5DCz 0x43D907BCz 0x419ACEC4z 0x419D2F4Cz 0x43215824z 0x43215808z

  This causes the crypto isakmp phase I to come. There are also IPsec SA of Phase II on the Member of the Group and is to encapsulate traffic. However, on the key server, I don't see that any SA Phase II IPSec defined.

  I checked the same behavior on two different IOS routers acting as a key server.

  2801 > sh ver

  Cisco IOS software, 2801 Software (C2801-ADVSECURITYK9-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)

  2811 > sh ver

  Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)

  I have generated RSA key pairs, defined in the ACL mirrored, static routes, isakmp, ipsec (including the transformation game) etc. correctly profile. The configs for the Group GDOI is as follows:

  gdoi crypto group GDOI

  Identification number 1

  local server

  generate a new passkey mypubkey rsa GDOI

  generate a new key transport unicast

  1.1.1.1 ipv4 address (interface WAN IP)

  his 10 ipsec

  match address ipv4 GDOI

  Profile GDOI

  !

  card crypto GDOI 10 gdoi

  set the Group GDOI

  !

  It was working a week ago and just started to happen. It is an off-production area. I'm stumped and looking for someone with answers. I don't see problems on BugKit tool from CISCO.

  Thank you

  Brian

  Well a KS cannot be a GM to itself if your configuration it incorrectly.  You said that it worked, but I don't see how it could have been.  A KS should be a stand-alone router, do nothing, but acting as the KS for the GMs GET.

• Impossible to get Gallery working on the web server

  http://codadesign.NET/NewSite/design.html

  When you click the button on the design, the Gallery does not work. The thumbnails here, but when you click on it there is be a picture in full size at the top. Ideas?

  Your click audio file is not accessible.

  http://codadesign.NET/NewSite/sound/click.MP3

  It has not been uploaded to the web server or the file type is not allowed on the server.

• Satellite U200-160: where to get a replacement of the fan

  Someone point me in the direction to have a replacement for this laptop CPU fan as it gets very noisy and also if anyone knows where to find replacement keys especially buttons of the mouse on laptop, because the paint is fading and it looks terrible.

  see you soon

  Hi mate

  All Toshiba laptops parts can be ordered from the responsible ASP in your country!

  This link leads to the global database of ASP.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  I presume that it s not possible to get only the singles the touchpad buttons, so if you want to replace the buttons, you will need to get the whole touchpad, but before you order parts you should take notice of the ASP.

  Greetings

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Where to get a link to the original Win 7 ISO?

  Specifically, I need to Home Premium SP1 Ukr 32/64 and Ultimate SP1 Ukr 32/64. I have a key.

  I have original MS DVD without SP1.

  Whenever I need to reinstall the system that I have to go through the installation of boring updates + restart cycles. It takes about half a day.

  I tried to get the ISO original on the site of MS, but without success.

  I have go Thepiratebay to get legitimate DVD images or make me a better choice?

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Why do I get "unable to browse the OPC server on the selected machine. -2147024891 error in GetOPCServerList.vi"trying to connect to a remote OPC Server?

  Software version:

  LabVIEW 2013 (32 bit)

  Windows server 2008 r2 (64-bit)

  OPCenum.exe installed

  Artyom,

  What you run when you get this error?

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• How can I get my password for the mail server

  I had to change my password for email to work through chrome for my home email, now I can't on my email with the password account on my laptop. His past mail server application, is different from my password I use to access my account gmail away from my computer at home?

  The password that gives you access to gmails webmail account using a browser is the same password that Thunderbird needs access to this same server to download e-mail messages.

• How can I get old messages on the IMAP server

  I used to be able to find years of mail but with IMAP, it seems to be limited to the last year. I hope that the mail from the previous year is still there! How do I retrieve old messages so I can check it on my drive (and search locally)?

  Thank you

  If you are using an IMAP account, what is on the server must be in your mailboxes. Go to the website of your provider's webmail and check that it matches. If you archive messages, look in the folder of the archive on your mac and on the webmail site.

• TRENDnet wireless card will not get an IP from the DHCP server

  I recently installed a Trendnet TEW-423pi/a card in a HP Professional refurbed PC. I quite agree the firmware on the card is wobbly and no update is available. Before I chuck this map I was looking for other suggestions for troubleshooting. The card keeps defaulting to the automatic private ip address structure. I have updated the drivers and looked for updates to the firmware without success. The PC is under Win7 64 bit Business. I installed the device wireless in Trendnet without success. I even assigned a static ip address of one of the many ones open on my router. I tested a card wireless from another machine and it fine configuration.

  Hello Bilejuice,

  Thanks for posting your query in Microsoft Community Forum. However, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums :

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• screen saver does not - says he needs the following file: dsdx932.dll where I get it

  screen saver does not - says he needs the following file: dsdx932.dll where I get it

  Try the Direct X Installer Web -.

  Download details: DirectX end-user performance

  If the d3dx9_32.dll file is missing in fact the Web Installer will install a. If it is corrupt you then if you delete the file Sytem32 and SysWOW64 (with 64-bit Windows) Web Installer will install a new copy.
  The Web Installer does not overwrite existing files.
  When you do not get an error of direct x with a specific file name. You must use the
  Direct X Redistrubitable June 2010 as it will overwrite existing files of DX.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Hello, I buy photoshop, but still, I don't get my serial number. where I get it?

  Hello, I buy photoshop, but still, I don't get my serial number. where I get it?

  The only thing I have is my purchase order

  Hi Sahamara,

  I checked your account and I see that you have found the line of serial number that you have still not accepted the invitation of CC Adobe teams.

  If please check your Inbox and accept the invitation and then log out of the desktop application Adobe CC and reconnect.

  Sign in, sign out | Creative office cloud app

  Kind regards

  Sheena