Flash simulation

Similar Questions

• Camera Flash Simulation

  I have a show I want to make them feel more active. So I wanted to try to give the impression that people were taking pictures during execution.

  I tried to superimpose a duplicate of opacity to 60% of the video which has been lightened and use that as a way to create the flash but the boy looks like cheese. Keyframes on 4 frames start at 100, and fades to 0. CHEEEEZYY :-o Blacks in the flash look too washed to be credible.

  I have Ae cs5 & 6 with most of the plugins redgiants (2 years old).

  What you suggest that the best way to made a realistic flashing of cameras?

  

  Duplicate the layer and set the double points for a single framework and exit.  Roto on the subject and adjust the levels on the duplicate layer effect.

• CS6 update 2 - iOS Simulator Support - not found UIKit - OSX Lion

  Hi I just updated day at CS6 update 2 with the support of iOS Simulator, but trying to push the flash Simulator I get an error of

  -UIKit framework not found

  I'm on OSX Lion with the latest Xcode.  I think that it may have to do with Flash are looking for directory of developer to the UIKit, who with Xcode and Lion, moved inside the XCode application.  Anyone encountered this?

  It's the suggestion that Adobe has worked for me:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneSimulator.platform/developer/SD Ks/iPhoneSimulator5.1.sdk

  He also worked with the Simulator SDK iOS6.0.

  The app lke it does normally with Xcode, however, don't you find on the springboard Simulator and launch it yourself.

• Number Lock on startup... Please help a damsel in distress!

  I have a Thinkpad X 41 2525 F8G. Whenever I start the pc is a defined number of locking. Can someone tell me how to configure it so that it does not happen.

  Thank you very much

  Ann

  You can set the initial state of NumLock in the system BIOS. This is a kewl Flash Simulator that allows you to see how it works. Go to Config-> keyboard / mouse-> Thinkpad NumLock and/or PowerOn NumLock.

• Number of cycles in the target FPGA VI

  Hello to everyone.

  I'm working on a project where I use sb RIO 9636. I subtract a number of past and present of the encoder pulses. Here, I have attached VI that I use as target VI. When I use simulated I/O lets say that the program works correctly. When I compile VI on sbRIO I noticed that the LED indicator named x = y? never flashes (even if she flashes simulation).  Also, when I put indicaton on the number of cycles of control, counting starts from a few very very valuable.

  Could someone help me?

  Thanks in advance.

  Hi Chupka993,

  I suspect that part of the behavior of the that you describe, is that when you change the clock of the loop, you change the speed at which the loop works. As GerdW said, this loop timer setting gives your code a rate at which it should run. For example, defining 1ms means that your code inside this loop executes once per millisecond, or 1000 Hz. ticks would work similarly, but I think the timescale ticks of the FPGA clock which is generally 40 MHz on our devices.

  When you have the timer set to 1 millisecond loop, the code in the loop executes 1,000 times per second, and your iteration count would be 1000 times before update output, which means that your code runs a full 1000 iterations once per second. If you change the clock of the loop of 2 milliseconds, the loop will run 500 times a second sense that your 1000 iterations would take 2 seconds to run. I think that the behavior you're seeing is because the iterations are produce faster that you intend.

  You need to understand exactly how much time it should take your loop to run 1000 times and then set the timer loop to the appropriate value to achieve this goal.

• Data storage local application?

  Hi all.

  I want to store the data of the application installed on the PlayBook.

  Anyone knows where is this dedicated space and how to access?

  The main use is to use a SQLite database (but not only).

  (What is possible with the simulator at all?)

  [Edit: the message is more specific.

  Hello Julien, thanks for the reply.

  In fact I tried to use ApplicationStorage already, but I got a 3003 error: exception "file or directory does not exist.

  When I run the App in internal Flash Burrito Simulator, there is no error: the db file is correctly detected.

  But it seems that File.applicationStorage is not on the PlayBook Simulator.

  Is there a simple test to check the correct path to the App store?

  [Edit 1]

  Some news: I could verify that the ApplicationStorageDirectory is finally ok (correctly created in the card Sim PlayBook.)

  The problem actually comes from ApplicationDirectory, where I get the "source" file load in the dbFile.

  If the command "File.applicationDirectory.resolvePath("assets/MyFile.ext"); ' return something like:

  "/ mlc/sandboxes/guest/PROJECTNAME.debug.XXXXXXXXXX/app/air/assets/MyFile.ext".

  (XXXXXXXXXX seems to be the ID of the deployed project series)

  And if this file "does not exist" when I access it.

  (reminder: it works very well in the internal Flash Simulator)

  Is there a simple test to check the correct path of the deployed application. ?

  (always to research...)

  [Edit 2]

  Well, it seems that the solution was related to the embedded file (or not) during deployment.

  So I have included the file I need (xml file) in the line of command deployment, and it was found correctly on the PlayBook, using ApplicationDirectory (as described by Julian).

  Just for review, I first tried to include the 'active' comprehensive directory, with an error that results from:

  java.lang.IndexOutOfBoundsException  at java.io.ByteArrayOutputStream.write(Unknown Source)    at com.qnx.bbt.deploy.Deploy.readPackage(Deploy.java:173) at com.qnx.bbt.deploy.Deploy.verifyPackageId(Deploy.java:138) at com.qnx.bbt.deploy.Deploy.sendRequest(Deploy.java:124) at com.qnx.bbt.deploy.Deploy.run(Deploy.java:100) at com.qnx.bbt.deploy.Deploy.main(Deploy.java:73) at com.qnx.bbt.airpackager.BarAirPackager.callLauncher(BarAirPackager.java:206)   at com.qnx.bbt.airpackager.BarAirPackager.run(BarAirPackager.java:129)    at com.qnx.bbt.airpackager.BarAirPackager.main(BarAirPackager.java:78)Error: null
  

  (It may be related to a specific inside assets... file or directory size... but this isn't a big deal)

  Then, finally solved. Would be the last word: do not forget to include the 'active' files you need!

• Disable the default function of the button 'Back' for Android.

  Hello!

  I tried SO MANY methods to PREVENT the default function of the previous button in Android, but without success

  It is one of the codes that I have used without success:

  stage.addEventListener (KeyboardEvent.KEY_UP, optionsKey, false, 0, true);

  function optionsKey(ke:KeyboardEvent):void
  {

  If (ke.keyCode is Keyboard.BACK)
  {

  ke.preventDefault ();
  ke.stopImmediatePropagation ();

  Make my own code below...

  }

  }

  I use Flash Cs6 , 3.2 Air for Android , testing on LG Google nexus 4.

  When I use the flash Simulator, it works great! Means the back button, let the App back to the previous step (as I expect to do)

  But after I publish the apk (picture format: Auto, auto orientation, rendering mode: GPU), as soon as I press RETURN, it minimizes my app!

  (means that when I press the back button on my phone, the application to reduce to the minimum (not close!) to the bottom. when I reactivate / click on it, I see the app is actually passed a stage (I programmed and planned), but I just CANT STOP the default MITIGATIONaction /by disabling my application after pressing the back button.)

  Anyone has any fileFla'I can see it in ACTION Please?

  Because I used several several codes and no luck yet

  Thanks and looking forward for your any kind of help...

  Post edited by: Pouradam

  I had my own answer with myself!

  in the code above. KEY_UP should be replaced. KEY_DOWN.

  simple!

• How to display multiple images when I hover over different areas with the function of mouse?

  I worked on a flash Simulator to show what our product would look like twin rangefinder Expert. The idea is to fly over an area, or image and show the range or extent to which the object is to you.

  

  I managed in the implementation with the following code below.  However, I can't add several images "range" (or symbols) when I hover over a certain area.  Can someone help me with the code?  I looked for hours on the internet and I can't make it work.  I'm new to Flash, but begins to learn as much as I can.  Any help is appreciated!  Thank you!
  

  ActionScript 3:

  img_nv. Mask = mask2_mc;

  mask2_mc.buttonMode = true;

  mask2_mc.addEventListener (MouseEvent.MOUSE_DOWN, onDown);

  mask2_mc.addEventListener (MouseEvent.MOUSE_UP, onUp);

  function onDown(e:MouseEvent):void {}

  mask2_mc.StartDrag ();

  }

  function onUp(e:MouseEvent):void {}

  mask2_mc.stopDrag ();

  }

  You can't have different functions with the same name.  Back to my previous answer (4) where I talk about using the tables of information/data and event.currentTarget.name.

• How to drag and drop multiple objects in a mask?

  

  I worked on a flash Simulator to show what our night vision product would look like in the dark.  I managed in the implementation with the following code below.  However, I can't add a picture "crosshairs" (or symbol) to the movable mask to make it work.  Can someone help me with the code?  I looked for hours on the internet and I can't make it work.  I'm new to Flash, but begins to learn as much as I can.

  ActionScript 3:

  img_nv. Mask = mask_mc;

  mask_mc.buttonMode = true;

  mask_mc.addEventListener (MouseEvent.MOUSE_DOWN, dF);

  stage.addEventListener (MouseEvent.MOUSE_UP, dropF);

  function dF(event:MouseEvent):void {}

  mask_mc.StartDrag ();

  }

  function dropF(event:MouseEvent):void {}

  mask_mc.stopDrag ();

  }

  Use a loop (such as enterframe) and update the position of the reticle to match the position of mask_mc.

  mg_nv. Mask = mask_mc;

  mask_mc.buttonMode = true;

  for example, if you add reticle_mc to the stage in the authoring environment

  removeChild (reticle_mc);

  mask_mc.addEventListener (MouseEvent.MOUSE_DOWN, dF);

  stage.addEventListener (MouseEvent.MOUSE_UP, dropF);

  function dF(event:MouseEvent):void {}

  addChild (reticle_mc);

  this.addEventListener (Event.ENTER_FRAME, reticleF);

  mask_mc.StartDrag ();

  }

  function dropF(event:MouseEvent):void {}

  removeChild (reticle_mc);

  this.removeEventListener (Event.ENTER_FRAME, reticleF);

  mask_mc.stopDrag ();

  }

  function reticleF(e:Event):void {}

  reticle_mc.x = mask_mc.x;  assuming that they both have the same reg points (as the Center)

  reticle_mc.y = mask_mc.y;

  }

• Creating a start button

  I've written a MicroSoft HTML Help (main layout) file to support a Flash simulation. The simulation will be on a CD. The help file will be on the same CD. Is it when even the creation of a help launch button? I tried to create a shortcut to the .chm file, but it wouldn't let me put it on the CD. Thank you

  You should be able to add a shortcut to the Conference on disarmament.  You may not be able to create it directly on a CD because the CD is read-only.  You must write help on a CD before you can create the shortcut, you must write the shortcut on the CD.  However, a shortcut might be a very bad idea because it will include a drive letter that may vary from one user to the user.  Why not just have the user double click the help?  Is not very different by clicking on the shortcut.

  Once, I created a simple dialog box that would autorun on CD.  He had buttons to install the software, please read the manual or watch educational videos.  Each of these used the command ShellExecute to execute the file right from the CD. Maybe your developer could Crest something like that.

• Automatically close a page?

  The other day I learned how to automatically launch a full screen simulation using code HTML ( here) now I'm curious to know if it is possible to make this browser itself nearby page. I'm sure it was possible, I'm not sure that it's complicated.
  
  Why am I doing this? I just realized that my two simulations must be performed consecutively. Rather than to cram together in a single project, I want to keep them separate and give to the learner a button to access the other simulation (link to the "name_fs.htm" file). It works, but it leaves a browser window full screen open (open in such a way that the average user is unable to close). Perhaps a way to make the current swap simulation stand for another simulation?

  With a little help, a local coder and a little search previous posts I figured out how to do what I want. As a reminder, the goal was to have a link that opens a page that automatically launch my flash simulation in FULL mode full screen (without borders). I also wanted this page to close itself after the launch of the simulation. To complicate matters more, I had the simulation to call another simulation.

  The second problem turned out to be easier than I thought. I tried to use a button to open a URL. It works, but not very well. I learned that I could open a project instead of (the project being the SWF file). The simulation be traded against the other simulation very carefully.

  The first issue required only one line of code added to that I received earlier (the javascript Window.Close ()). Here is everything:

• AJAX based Inter-portlet communication (IPC) using XHR

  I'm working on a portal application to pass a variable to a main portlet to several other portlets. The main portlet has an interactive flash application, so it cannot be updated with inter-portlet communication or the State of the .swf will be lost. Accordingly, I need a method AJAX do CPI and not the parameter and the attribute base CPI samples in the docs of BEA. Basically, when an event occurs in the main portlet I need of other portlets to get a variable and update specific portlets without refresh the portal page on the whole or any portlets independent. I noticed that the DISK framework will probably do what I am loooking for with Portal-aware XHR; However, the sample code and documentation for this is sparse at best. I was wondering if there are whitepapers, docs, executives of samples, etc. out there that you could help me with?
  
  Thanks in advance.

  I set up an example of what I mean and checked that there actually working and downloaded here: http://cid-b9069ca155c41007.skydrive.live.com/self.aspx/Public/demo.zip.

  Which unzip into a Web portal project and take a look at the flash (simulated) portlet and portlet listening. Please answer back with follow-up questions!

  George

• Application developed in Flash CS5 will not run on a Simulator

  Hi All-

  I have a few applications that I created using Flash CS5 and adobe Air 2.5. Applications work fine in flash, but when I try to run on the Simulator I get an icon of 'thinking '... (5 points that scroll on the screen as if the PlayBook (Simulator) is stuck thinking)

  Any thoughts on how to solve this problem?

  nothing not (no pun intended hah) strikes me as being wrong. The magic.bar is in tiny vs the rest, but I don't think it would affect anything. also all the xml code under the original XML code you posted im assuming that was a copy and paste error? You seem to have all of the required fields you need for file descriptor.

• Make background Transparent on AIR Flash CS5 for BlackBerry Tablet Simulator Application

  Hello

  I tried to find a way make the background Transparent on the Flash CS5 for BlackBerry Tablet Simulator AIR Application and I think it has to do with my *-app.xml file.  I saw another forum mention adding the tag and the parameter 'true '.  I put it inside my tags and my .bar file would not always compile using the command line package.  As soon as I remove the label of , I can compile the .bar file and view it in the simulator of the tablet.  Does anyone have advice?

  You must assign the value true in the file of your blackberry - tablet.xml, no not your - app.xml file.

• Flash Builder does not appear to be deployed to the Simulator:

  Hey guys!

  So here's the deal. I am running Win7 with the IDE Flash Builder Burrito. I followed the guide on the BB step by step to create my first Hello World project. When I try to debug, FB seems to show that it has installed the successful application on the Simulator, but still waiting to connect to the application until it finally expires with the message "the Flash BUilder debugger cannot connect to the running application".

  Host machine, I ping IP of the Simulator, and the mode of development.

  I inserted the target IP address in the Debug menu (it's 192.168.88.128) and the debug host is the IP address of the host too (10.0.3.136). I entered the correct device as password.

  Scratching my head here now, what Miss me?

  Alright! It is very very annoying. I discovered that I was in fact trying to deploy on the previous version of the Simulator... Sorry to lose all time on it. Consider this a rookie mistake