Flash video jumps despite the low CPU usage
It is a problem of browser independent (in IE and FF) and apply only to the Flash Video (YouTube, for example)-it happens for example with DivX.
Time to time the video will drop frames. Running beside the video Task Manager, I see that the CPU actually tends to fall in these moments, rather than boost. Well, it comes down to the departure at the time of the loss of images and then upwards slightly above reference for a short period. Use during playback, however, is very small, about 3-4%.
What I tried:
Change Windows high-performance power management
Deactivation of many processes that run in the background
Deactivation of the possibilities for energy savings in the energy Manager of Lenovo and technology Intel Rapid Storage Technology (though I doubt that this has nothing to do with the HARD drive)
Disabling hardware acceleration in Flash
.. .but does not.
System information:
Flash 12.0.0.77
I have a new Lenovo Z710:
Processor: 4th generation Intel Core i7-4700MQ processor (2.40 GHz, 1600 MHz 6 MB)
Operating system: Windows 8.1 64
Graphic system: 2GB
Total memory: 8.0 GB PC3 - 12800 1600 MHz SDRAM DDR3L
' Display type: 17.3 "FHD LED Glare Wedge 1920 x 1080
Device HDD: 1 TB + 8 GB
It has Intel Graphics HD 4600 running the latest drivers.
It's a clean new laptop - I did very little with it and actually this problem presented before I did anything for her.
It is quite frustrating and my old Acer laptop, although usually slow, doesn't have this problem.
I hope someone can help.
Thank you
Lech
Hello. I have a similar problem with casual framedrops while watching Youtube videos in point 8.1 of Windows. My processor is a core i5-4440 quad, and I also GMA 4600.
I think it's a little problem with Flash player multi-threading with quad core CPU. It does not seem to happen when I go in the Manager of tasks and set the affinity for the Flash Player to use only a single core. Try it on your machine and see if it falls still frames.
Tags: Flash Player
Similar Questions
-
Video choppy despite the low use of the system
Hi all, I've upgraded my system yesterday to:
6 core processor AMD 1055 t.
16 GB of RAM DDR3 1333
using My Nvidia GTX295 existing 896Mbx2
I have a separate drive for projects and scratches, the two 7200 RPM
My question is, when I saw a clip encoded in divx, it plays for about 1 to 2 minutes. In software mode, the CPU usage never exceeds 25% and with the active MPE, use GPU never exceeds 10%. After 1-2 minutes, the video becomes very agitated and even stall, despite the persistence of the audio. The problem is present in software and active MEPS.
If suspend you the preview and wait for 10 seconds, this will allow another 5 seconds fluid video until it be ground moved back. I am baffled by the present, as system resources seem not taxed. I'm not sure how to measure if my hard drives are the bottleneck.
Can someone please help me solve this problem? , I created this system for my wife, who is excited to learn Premiere Pro. I understand that I should buy an Intel I7, but my budget unfortunately did not respond to this.
Thank you
Adam
Adam,
In addition to Randall's remarks, there is another thing to consider, only two disks.
You have three weaknesses in your system:
1. the Phenom CPU, that lack of support of SSE 4.1 +
2. the GTX 295, which serves only to 50% of its capacity
3. only two disks.
The combination of these three factors can easily lead to it be ground that you meet. In addition, insufficient adjustment can make the problem worse. Have you checked Adobe Forums: installation and adjustment of a Vista... Guide which also applies to Win7.
-
This problem sometimes occurs when my computer starts. Today, it happened and actually picked up my internet connection, which also won the update of Flash Player and Internet Explorer open. Also, I couldn't get the Start Menu to open. What is happening to the CPU is too busy doing something else? Is there a way to refresh the process or the CPU?
Hi Hope_H,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. do you have security software installed on the computer?
4. you receive an error message?
Checking service or program uses high processor usage by using Task Manager.
To view the CPU usage, press CTRL + ALT + DELETE, click Task Manager, and then click the performance tab.
Overview of the Task Manager
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
This morning helped the nightly update manifest. However, he hung Mid-implementation to date. Noticed CPU has increased substantially to about 85%. Tried disabling add-ons, safemode, reboot... Processor clocked constantly higher than 50% now even without launching nightly. Stakes never 100%, but extends between 50% and 92%. I'm puzzled! Ran Malwarebytes and ESET NOD (last)... nothing detected. I completely shut down and rebooted 5 x now. Same question.
Searched with keywords "CPU usage" excessive and inactive. Found the following link
Followed the instructions and it worked like a charm. CPU now idling between 4% and 12%. Candy!
-
Hello
I'm trying to write a code that did a bit of manipulation of the table and some simple trig to do something quite critical time. I noticed that the use of the processor in my machine was terribly weak, has never really superior to 50%. Puzzled, I tried to write a very simple code (some time infinitely loop executed a few simple calculations for the iteration counter) and who was running. Even with this simple code, the CPU usage is not improved. As already said, I'm writing something quite critical time, so the utilization rate, the better it is.
The computer I'm running this code is certainly not the high-end - an Intel Atom Z530 clocked at 1.6 GHz with 1 GB of RAM. However, I am limited in my choice of material (note that memory usage is no where near pegged, either - with my code and the simple loop).
Is that what I can do to increase usage? I tried to turn off debugging, with little luck.
Thank you.
Yes, I noticed that afterwards, Altenbach. However, as HT-transformer, is not the operating system that it is 2 logical processors and therefore 50%?
As you mentioned in your previous post, 2 while loops must confirm it.
/Y
-
The Task Manager is now just 'CPU' because I must have hit something wrong. I was hoping just to click on the tab use the CPU in the Task Manager, now somehow when I hit CTRL, remove alt. it shows only the CPU usage graph.
Double-click the window border.
-
Problem with the Ubuntu CPU usage
Hello
We meet a few the next problem with an Ubuntu VM:
The virtual machine has 8 vCPU (increased from 2 Sockets with 4-core to 8 outlets with a carrot) and the latest VMware tools installed. Even if there is a lot of load on this system, the virtual machine seems to use about 25% to 50% of CPU capacity. The return of the command vmstat 1 during this time is:
user: 28%
system: 4%
inactive: 78%
wait: 0%
VCenter statistics shows a spike on the CPU load, but epi only climbs and rest between 25 and 50 percent or a maximum use of 7 309 MHz (about 16,000).
Here are some features of the environment and the virtual machine:
Server:
VMware ESXi 5.5
VMware vCenter 5.5
HP ProLiant DL380p Gen8
- 2 x Intel Xeon E5-2620 @ 2.00 GHz
- 96 GB OF RAM
- QNAP-TS-869U-RP via iSCSI
VM:
12.04.4 of Ubuntu LTS (GNU/Linux x86_64 from 3.8.0 - 36-generic)
VM-Version 8
8 vCPU
8 GB vRAM
Updated version of the VMware tools installed
What can we do to improve the virtual machine CPU usage?
Please let me know if you need further information.
Thanks in advance
Christian
Since a thread can use 100% of a vCPU it may be a problem of thread on your application.
You should look at the use of the individual processor instead of overall consumption.
Lets say that the application can use only 1 wire but it uses 100%, this means that it will use to 12.5% of the total cpu resources allocated to this virtual machine. (100/8)
Linjo
-
How to list users oracle with the 100% CPU usage
Hi Hussein.
Sorry it is not really related to EBS :)
EBS R12 (12.0.6)
4.6 RHEL
I see high utilization of the processor for the "frmweb" process intermittently Sometimes they show once a week.
Here is the result of the 'top' command
How to get this list using ps - ef or any other linux command (without using the 'top') so that I can write a cron to kill this fugue jobs everyday at midnight.top - 17:02:38 up 132 days, 20:16, 5 users, load average: 1.17, 1.10, 0.89 Tasks: 523 total, 2 running, 521 sleeping, 0 stopped, 0 zombie Cpu(s): 9.9% us, 2.8% sy, 0.0% ni, 87.4% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 8309152k total, 8287716k used, 21436k free, 7652k buffers Swap: 10482308k total, 1987192k used, 8495116k free, 3741056k cached PID USER PR NI %CPU TIME+ %MEM VIRT RES SHR S COMMAND 21680 appldev2 25 0 100 26:47.62 5.9 3071m 476m 14m R frmweb 27832 root 16 0 1 0:00.41 0.0 2576 1268 780 R top 1 root 16 0 0 2:21.02 0.0 3504 444 416 S init
Thank you very muchHello
There are a lot of links that should be useful here. Some links are referenced below:
UNIX command to find the CPU usage
http://www.Cyberciti.biz/FAQ/UNIX-command-to-find-CPU-utilization/How to Linux CPU utilization?
http://blogs.Oracle.com/Pranav/2009/02/how_to_find_out_cpu_utilizatio.htmlGoogle search for "Use of the UC Linux" and you will get many occurrences!
BTW, why do you want to kill these processes manually? You should find out the reason, so having a high utilization of the processor rather than kill those processes.
Note: 745711.1 - process forms (FRMWEB) consumes 100% CPU in Oracle Applications R12
Note: 789659.1 - how to generate a stack of forms with Applications R12 TraceKind regards
Hussein -
Satellite L500D - high all the time CPU usage
Hi guys,.
help a friend with a laptop, the thing was really slow had vista on it, so formatted and installed win7 x 64. It's a toshiba satellite l500d-pslk0a-00r009. Dual core 2.2 ghz. 4 GB RAM. (did a new install not updated)
Even on an installation of vanilla, just running windows only update is trolling the heck out of him. CPU is sitting at 100%, but looking at the process that they all sit at zero. I can't see what process is the cause.
Web browser opening is really offbeat it will freeze and say does not then come back after some time.
temperatures are good (50deg C). Power profile is very good. Even turned off all the animations. always the same question.
RAM usage is less than 20%.
There is certainly a problem with the CPU, I ran the windows performance index, all rated in the Middle 4 except the CPU that qualified 2.0!
I've updated all the drivers etc. What else can I try and do to solve the problem of cpu?
Hello
Try this: go into Device Manager and expand the entry processor and remove all entries from the CPU. Reboot the laptop.
After that the windows system should recognize the entries deleted once more.After that I recommend you to check if the CPU performance.
-
System interrupts the large CPU usage
Hello
I recently installed Windows 7 Professional on my computer and I'm having a problem with a process called system interrupts by using a batch processor (about 25%).
I tried several supposed fixes I found here and on other forums, but have not solved the problem.
I'm really tired.
http://i289.Photobucket.com/albums/ll203/SK-illfull/systeminterrupts.jpg
Motherboard: Gigabyte GA-EP35-DS3
Video card: Nvidea 8800 GTXMy computer got so slow that the mouse has been slow and jerky, and I had to reboot. Interrupts system was approximately 30% of time CPU. My PC is now available 5 days and the bug seems to have disappeared. The following solution seems to fix the problem:
1. right click on the "speaker" icon
2. Select playback device
3. click on the properties of speaker
4. go in the tab of the improvements
5. click on Disable All Sound Effects
6. click on OK. You're done!
Sound improvements seem a reason any cause the same problem when not in use. So disable them following the above procedure. Good luck!
-
How to limit the rules (CPU usage) doesn't include a few servers (IP)
Hello
There are few servers who always raised processor and we do not generate alerts for servers, but we need to get the statistics of CPU in the FMS, is there a way I can limit the rules (i.e., the CPU utilization) to not stand for these servers.
Thank you
Shashank Soni.
Hello
You can change the definition of the rule to exclude certain hosts.
In this example, we add a condition by saying that the does not apply to a specific host, or hosts.
Note that you may need to replace the name of the property with the property that designates the host name.You can also check the host name in the status itself
Another option you have is to find the variable being compared and it scope (give it a very high value for specific hosts.
I hope this helps.
Golan
-
UAD 2 plugins allows me to bounce back, despite the low use of DSP
I would go back on the issue of the UAD-2 do not allows to bounce, with error message "UAD plugin has been disabled. DSP passed overhead. "But my DPS said only 46% or even less. I've got two UAD 2. It seems to be random to do this, sessions which, apparently, are meaningless, but the main thing is I'm really sick of dealing with this problem. After mixing hours * to customers *, I can't make a rebound. Nor do I have fades chained, but I'd be happy to be able to just do a rebound. Help.
UAD said the hearing do not support and I think that this is unacceptable. Adobe and UAD should support me each other, and why this is not the case is a mystery to me.
I can't work like that all.
Is there someone out there who can help you?
Note: I have CS6 5.0 build 708. I missed some updates of patches, 5.2. This update solves this problem?
Question about the 5.2 update - I have to reinstall my VST plug-ins after update? I am mid-project and don't want to do anything major, but if not, and he's going to solve my problems, then I'll do it.
Thanks for any help? People from Adobe?
I don't really know. I can't imagine that's the case, but 1-2 second buffer size seems completely there. A few things to try solve the problems:
1. sign problem and record under a new session. We will use this to test
2 remove each plugin UAD, save, then restart hearing and open the session. Do you still have the defects on the crossfades?
3. If so, remove any other plugin and repeat. Still problems?
4 otherwise, how low you can reduce latency/buffer size, before you get glitches in playback?
I believe that you have sent in the past, but if you can send a new session SESX file that shows these problems, we can put it in the debug on our side and see if there are any clear bottlenecks. However, I know at least the UAD-2 personally someone who doesn't have these issues at all, at least with newer versions. You can send the session file to [email protected]
Thank you
-
Flash update request despite the silent automatic update enabled in MMS messages. CFG
This is in regards to Windows 32 - bit Flash Player Activex. Version 14.0.0.145
We have silent automatic updates enabled for 15000 Windows 7 computers. Sometimes non-admin users are encouraged to update when Adobe releases a new version, such as 14.0.0.176. WHY? WHY? WHY?
Here's our MMS. CFG that we use in C:\WINDOWS\SYSTEM32\MACROMED\FLASH
AutoUpdateDisable = 0
SilentAutoUpdateEnable = 1
SilentAutoUpdateVerboseLogging = 1
AutoUpdateInterval = 0
Hi Bob,
Now we are in what we consider a a statement of "strong". The automatic update silent, which currently grows 14.0.0.145, will be updated at 14.0.0.176 within 45 days of the 8/12.
To stop the dialog box notification of the event with your users, I highly recommend a look at the chapter that Maria mentioned in his post. It's really the easiest way to ensure that your users are always up-to-date with the latest version without user interaction.
Thank you
Chris
PS. You can also delete AutoUpdateInterval = 0 of your mms.cfg settings. It's a little confusing, but whatever it is preceded by "AutoUpdate" refers really to our update notification, not the automatic update silent dialogue.
-
Only the core CPU usage high sys what creating instance of database using dbca
When you use dbca to create the database instance
Use of the high sys JUST ONLY a core processor
How do I solve this
see this:
mpstat infotop - 09:28:19 up 55 days, 20:38, 10 users, load average: 1.00, 1.08, 1.31 Tasks: 1231 total, 2 running, 1228 sleeping, 0 stopped, 1 zombie Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 57588328k total, 55028620k used, 2559708k free, 196852k buffers Swap: 16386292k total, 23156k used, 16363136k free, 23011232k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11343 oracle 25 0 1771m 30m 23m R 99.7 0.1 5:36.39 oracle 3692 oracle 16 0 13948 2348 816 S 1.6 0.0 17:00.94 top 11432 root 15 0 13540 2024 820 R 1.3 0.0 0:00.21 top 11034 oracle 16 0 737m 171m 33m S 0.3 0.3 0:52.39 java 11435 oracle 15 0 66056 1596 1180 S 0.3 0.0 0:00.01 bash 1 root 15 0 784 172 160 S 0.0 0.0 38:56.76 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.58 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.75 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.81 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:02.53 migration/2
You can see there is only a single CPU CORE (core 74 but is random, other core have same status but just a CPU core)[root@localhost ~]# mpstat -P ALL 2 Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12 09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29 09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29 .... 09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00 09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 09:29:13 all 0.01 0.00 1.26 0.01 0.00 0.02 0.00 98.70 1761.19 09:29:13 0 0.50 0.00 0.50 1.00 0.00 1.99 0.00 96.02 1761.19 .... 09:29:13 71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 72 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00 09:29:13 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:13 79 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
iostat information[root@localhost ~]# vmstat -S m 2 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 3 0 23 1861 203 24267 0 0 8 12 0 0 0 0 99 0 0 4 0 23 1845 203 24262 0 0 602 16460 3682 8121 2 2 96 1 0 3 0 23 1842 203 24276 0 0 692 7520 3297 6610 2 2 97 0 0 3 0 23 1830 203 24277 0 0 786 3040 3302 7118 2 2 97 0 0 4 0 23 1829 203 24277 0 0 126 3144 3247 7343 2 1 97 0 0 3 0 23 1827 203 24279 0 0 76 2944 3292 7502 2 2 96 0 0 3 0 23 1823 203 24281 0 0 0 3248 3164 7656 2 1 97 0 0 2 0 23 1827 203 24279 0 0 0 3646 3080 7480 2 1 97 0 0 2 0 23 1828 203 24279 0 0 0 476 2942 5648 1 1 98 0 0 3 0 23 1824 203 24281 0 0 2 7476 3377 8111 2 2 97 0 0
more details:avg-cpu: %user %nice %system %iowait %steal %idle 1.28 0.00 1.29 0.00 0.00 97.43 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn hda 0.00 0.00 0.00 0 0 sda 5.47 0.00 83.58 0 168 sda1 0.00 0.00 0.00 0 0 sda2 5.47 0.00 83.58 0 168 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 0.00 0.00 0.00 0 0 sdb 8.96 0.00 123.38 0 248 sdb1 8.96 0.00 123.38 0 248 avg-cpu: %user %nice %system %iowait %steal %idle 1.27 0.00 1.27 0.00 0.00 97.46 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn hda 0.00 0.00 0.00 0 0 sda 0.00 0.00 0.00 0 0 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 0.00 0.00 0.00 0 0 sdb 17.50 0.00 236.00 0 472 sdb1 17.50 0.00 236.00 0 472 avg-cpu: %user %nice %system %iowait %steal %idle 1.29 0.00 1.30 0.01 0.00 97.41 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn hda 0.00 0.00 0.00 0 0 sda 0.50 0.00 16.00 0 32 sda1 0.00 0.00 0.00 0 0 sda2 0.50 0.00 16.00 0 32 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 0.00 0.00 0.00 0 0 sdb 7.50 0.00 144.00 0 288 sdb1 7.50 0.00 144.00 0 288
database version 11.2.0.2.0
the system version
hardware information[root@localhost ~]# cat /etc/issue Red Hat Enterprise Linux Server release 5.4 (Tikanga) Kernel \r on an \m [root@localhost ~]# lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Edited by: JOhnLiu on September 11, 2012 19:31vendor_id : GenuineIntel cpu family : 6 model : 47 model name : Intel(R) Xeon(R) CPU E7- 4860 @ 2.27GHz stepping : 2 cpu MHz : 2261.057 cache size : 24576 KB physical id : 3 siblings : 20 core id : 18 cpu cores : 10 apicid : 229 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx pdpe1gb rdtscp lm constant_tsc ida nonstop_tsc pni monitor ds_cpl vmx smx est tm2 cx16 xtpr popcnt lahf_lm bogomips : 4522.11 clflush size : 64 cache_alignment : 64 address sizes : 44 bits physical, 48 bits virtual [root@localhost ~]# free -m total used free shared buffers cached Mem: 56238 55892 346 0 196 23645 -/+ buffers/cache: 32050 24188 Swap: 16002 22 15979 [root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 19G 4.9G 14G 27% / /dev/sda5 230G 27G 192G 12% /home /dev/sda1 99M 12M 83M 13% /boot /dev/sdb1 2.9T 2.3T 464G 84% /array
JOhnLiu wrote:
Thanks for the reply sb92075[root@localhost ~]# mpstat -P ALL 2 Linux 2.6.18-164.el5 (localhost.localdomain) 09/12/12 09:29:09 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 09:29:11 all 0.01 0.00 1.27 0.01 0.00 0.01 0.00 98.69 1658.29 09:29:11 0 0.50 0.00 0.00 0.00 0.00 0.50 0.00 98.99 1657.29 .... 09:29:11 73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 74 0.00 0.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00 09:29:11 75 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00 09:29:11 76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 0.00
the system is essentially * idle at 100% * with the exception of single measure.
Why is it you're obsessed with single line of sar?
OS has been busy making a household for a snapshot. -
I create educational videos and want to put points into a video that will make things happen on the site, either a different window or the same window of the video. Is this possible? I'm not a web developer to post how to do it to me won't do much good. However, if it is possible, I will need someone to program a user configurable system, so I can put this link tip that I produce videos. I thank very you much for your time.
GT
Yes, you can use cue points to trigger events.
If you are looking to hire someone to do this, send me an email via my website: www.kglad.com
If you are looking for someone to do it for you free of charge, you will want to post your message on as several bulletin boards as you can.
Maybe you are looking for
-
I changed the password used to access my gmail account. Thunderbird still uses the old password to access the account. How can I change the password that is using Thunderbird. The last time this happened I ended up creating a new account to Thunderbi
-
straight iPhone voice mail calls
I had a problem with incoming calls to my iPhone goes directly into voicemail. Also, I got a phone message telling me that my voicemail box was almost full. I now emptied the voicemail box and I now seem to be receive calls very well (but have not
-
No idea why my TV guide continues to lose information? Every day that I turn it on, the guide is empty, to play a channel. After playing for a second, the guide is updated for this channel only. Bit annoying.
-
updated intel core i3 to i7 in a Sony VPCEB17FX/B
I have a Sony VPCEB17FX/B Notebook with an Intel Core i3 processor and I want to move to a processor Intel Core i7 is this possible with all other factory settings and hardware on this particular laptop.
-
Cannot run Aero error - Desktop Windows Manager is disabled
original title: error Aero My system meets all the requirements to run Aero in Windows 7, but I'm not able to run aero. The convenience store said: "Desktop Windows Manager is disabled.". He said that the problem has been resolved but sill no aero. A