Video choppy despite the low use of the system
Hi all, I've upgraded my system yesterday to:
6 core processor AMD 1055 t.
16 GB of RAM DDR3 1333
using My Nvidia GTX295 existing 896Mbx2
I have a separate drive for projects and scratches, the two 7200 RPM
My question is, when I saw a clip encoded in divx, it plays for about 1 to 2 minutes. In software mode, the CPU usage never exceeds 25% and with the active MPE, use GPU never exceeds 10%. After 1-2 minutes, the video becomes very agitated and even stall, despite the persistence of the audio. The problem is present in software and active MEPS.
If suspend you the preview and wait for 10 seconds, this will allow another 5 seconds fluid video until it be ground moved back. I am baffled by the present, as system resources seem not taxed. I'm not sure how to measure if my hard drives are the bottleneck.
Can someone please help me solve this problem? , I created this system for my wife, who is excited to learn Premiere Pro. I understand that I should buy an Intel I7, but my budget unfortunately did not respond to this.
Thank you
Adam
Adam,
In addition to Randall's remarks, there is another thing to consider, only two disks.
You have three weaknesses in your system:
1. the Phenom CPU, that lack of support of SSE 4.1 +
2. the GTX 295, which serves only to 50% of its capacity
3. only two disks.
The combination of these three factors can easily lead to it be ground that you meet. In addition, insufficient adjustment can make the problem worse. Have you checked Adobe Forums: installation and adjustment of a Vista... Guide which also applies to Win7.
Tags: Premiere
Similar Questions
-
How to restore the multimedia controller and multimedia video controller to the system?
How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?
Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.
-
Mac book pro logging out despite the system preferences settings
If my computer is turned on for more than 20 minutes without me touching the mouse/keyboard, I am prompted with a request to save my work before disconnection. If I get bored of the command prompt, I get disconnected. All of this is that despite what is defined in the system preferences.
In the menu bar, you select
▹ System Preferences... ▹ Security & Privacy
If there is a padlock icon in the lower left corner of the preferences window, click on it and enter your login password when you are prompted.
Click on the Advanced button and in the leaf that opens, uncheck the box marked
Log out after... minutes of inactivity
-
Flash video jumps despite the low CPU usage
It is a problem of browser independent (in IE and FF) and apply only to the Flash Video (YouTube, for example)-it happens for example with DivX.
Time to time the video will drop frames. Running beside the video Task Manager, I see that the CPU actually tends to fall in these moments, rather than boost. Well, it comes down to the departure at the time of the loss of images and then upwards slightly above reference for a short period. Use during playback, however, is very small, about 3-4%.
What I tried:
Change Windows high-performance power management
Deactivation of many processes that run in the background
Deactivation of the possibilities for energy savings in the energy Manager of Lenovo and technology Intel Rapid Storage Technology (though I doubt that this has nothing to do with the HARD drive)
Disabling hardware acceleration in Flash
.. .but does not.
System information:
Flash 12.0.0.77
I have a new Lenovo Z710:
Processor: 4th generation Intel Core i7-4700MQ processor (2.40 GHz, 1600 MHz 6 MB)
Operating system: Windows 8.1 64
Graphic system: 2GB
Total memory: 8.0 GB PC3 - 12800 1600 MHz SDRAM DDR3L
' Display type: 17.3 "FHD LED Glare Wedge 1920 x 1080
Device HDD: 1 TB + 8 GB
It has Intel Graphics HD 4600 running the latest drivers.
It's a clean new laptop - I did very little with it and actually this problem presented before I did anything for her.
It is quite frustrating and my old Acer laptop, although usually slow, doesn't have this problem.
I hope someone can help.
Thank you
Lech
Hello. I have a similar problem with casual framedrops while watching Youtube videos in point 8.1 of Windows. My processor is a core i5-4440 quad, and I also GMA 4600.
I think it's a little problem with Flash player multi-threading with quad core CPU. It does not seem to happen when I go in the Manager of tasks and set the affinity for the Flash Player to use only a single core. Try it on your machine and see if it falls still frames.
-
No sound/video game; Only the system sounds
I have a Toshiba Windows XP and there is no noise video or game, only for system sounds. Even though I have earphones in, it's the same problem. Someone please help me. I like to watch videos and play games with the sound. Thank you.
Hi kineticToast,
· Did you do changes on the computer before the show?
· D you get an error message?
· What application you use to play the videos?
· Are what games you referring?
Follow the steps in the article.
-
I use first elements 12-day.
I'm editing iPhone 5 video shot with the following specifications:
Type: MPEG Movie (.) MOV file extension)
File size: no more than not not 300 MB
Image size: 1920 x 1080
Frame rate: 30.00
Audio Format: 44100 Hz - compressed - Mono
Project Audio Format: 44100 Hz - 32 bit floating point - Mono
Total duration: no more than not not 3 minutes
Pixel format: 1.0
Project settings:
General:
Editing mode: DSLR
Time Base: 30.00 FPS
-Video
Image size: 1920 1080 horiz Green
Format of the pixels: Pixels square (1.0)
Fields: No fields (progressive scan)
Display format: 30 fps timecode
-Audio
Sample rate: 48000 Hz
Display format: Audio samples
Capture:
Capture format: DV
Video rendering:
-Previews
File format: I-Frame only MPEG
Compressor: MPEG I-Frame
checked = optimize stills
If I publish on the desktop and select AVCHD
choose: MP4 - H264 1920 x 1080 p 30
File type: H.264
Image size: 1920 x 1080
Frequency [fps] of image: 29.97
Audio: AAC, 160 kbps, 48 kHz, stereo
File size: 1531,05 MB
Duration: 6 Min 30,00 s
The video is choppy, whenever there is a moderate movement.
During the first reading, it is perfectly smooth.
All I want to do is be able to share this video on youtube, Facebook and watch it again on my computer of relatively high quality, but I'm willing to make compromises in order to get everyone to play smoothly.
1st quarter) what should I be out this about accomplish what I just said?
Q2) video must be only like 3 minutes after that installation but there seem to be 3 minutes of black screen at the end. How can I get rid of this black bit at the end?
cwsteini
Unless you have the information in front of you, please download and install the video properties MediaInfo reading program to determine the frequency of images or your video frame rates. Cell phone video is often characterized in variable rate which can (not always) create problems to get imported, video audio out of sync...
MediaInfo - download reviews and free software - CNET Download.com
Be on guard for any unwanted alongs carry with the MediaInfo. Excellent program, but those carry alongs can be a major nuisance. The reading of this program will tell constant compared to variable rate.
Also check the display to confirm that you are working with progressive video and not interlaced.
If variable rate, the next step would be to take video in brake hand and export it as H.264.mp4 with a rate constant, not variable. Use the median between the min and max.
We will follow to your results.
Thank you.
RTA
-
When I'm not able to use the video stream on the BBC website.
At the same time, I was able to use the video stream on the BBC website. I am more able to do. However, I use the video streams on other news sites.
If the videos are Flash videos, you have disabled an option in Flash preferences to not allow sites to store Flash cookies on your machine. Made BBC videos in Flash are expecting to be able to store cookies Flash, so videos can not work with this option off Flash.
Go to Storage Global Flash Settings Panel which serves as Adobe/Macromedia site and check the box «Allow third-party Flash content...» ", where you can then manage the sites you have already visited. You will need to reload the page from the BBC after you change this setting.
-
Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?
Hello.
I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
Thank youI already tried on S - video In and I get black screen
More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.
Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.
All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.
With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.
-
I am importing video clips using my Canon XL1s in final cut pro. See the video, I hear the audio until it is imported. any suggestions?
danobtwo wrote:
See the video, I hear the audio until it is imported. any suggestions?
Do you mean during the import process?
There is no FCP X parameter to change the way THAT DV is imported.
I used to hear the audio import with Sony cameras but Canon may be a different story.
If the imported files are OK, then it can be a thing of Protocol firewire Canon.
Al
-
How to set the use of video memory on the graphics card to my laptop cq56-110us?
Hello
I have a PC Compaq laptop CQ56-110us. Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB. I want to reduce the use of video memory, i.e. 256MB. Is this possible? If yes how. I would appreciate help with this.
Thank you
Don
Don, welcome to the forum.
Built-in memory is allocated by the system. As more video memory is required, is allocated. There is no way that you can change.
If your problem is solved, please click "accept as a Solution.
-
I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop
I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.
I could at some point... but now all I get is audio, no video. The files open and work on
my laptop that also uses Windows Media Player... but for some reason now... nadda. Seemed
This all started when I upgraded Windows more late service CAP and also installed Real Player.
Help!
Hello
- What version of Windows are you using?
1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.
2. the link provided below lists supported by Windows Media Player file format.
It does not list the AVCHD or. MTS files supported file format directly:
http://support.Microsoft.com/kb/3169923. yet we cannot be sure at this point that the issue is due to interference with some files.
Method 1:
Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To do this, there must be a restore point from the system in which the connection was successful.
Please refer to the below of the help links on performing a system restore.
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsMethod 2:
You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.Then you can uninstall any installed codec and install that you need to do the job file.
If you have several codec for the single file to work they can clash and cause problems.
You can check the link for assistance on the issue - belowhttp://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
-
Battery drains very quickly despite the non use of bike G
Hi, I am facing problem of battery drain in my motorcycle G. Even after recharged as it gets start very fast drainage even after 5-6 minutes it gets drained at 97 percent, despite the no use of motorcycle G.And also I don't keep applications running in the background, after the use of any application I close it for sure!
Is this normal for other users too?
Please tell me what to do?
How your battery last between charges? What happens for 5-6 minutes, this is not a good indication of battery life.
-
Restoration has worked previously. Despite trying other dates on different days, the message indicates that it is impossible to perform the restoration or the automatic desktop cleanup
Did not add programs. Home, unique administrator user. Having the backup disk but C: drive was chosen.
Google may have been corrupted; There was a short period when google opened five pages at the same time during a rain storm. No relief. Subsequently, all other programs worked, but Google pages in Word are shifted to the right. Virus and malware to date and used regularly - found nothing.
OK programs
Some security programs prevent changes to their file and must be configured to allow the restoration of the system work. For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program.
If this does not help, try to run the system in safe mode restore.
-
Is there a way for the secret video files to the sansa fuze using QUICK MEDIA CONVERTER?
Is there a way for the secret video files to the sansa fuze using QUICK MEDIA CONVERTER?
Not really. The way final only ot add videos on the "rocket" is SMC. Rhapsody will do this also, but I don't know that its faster.
-
Error: The video device is currently in use... trying to import video
original title: importing video
I'm trying to import video from my camcorder. I did this several times in the past with no problems. Now, I get the following message: the video device is currently in use. Close any other program that is using the device and try again.
I don't have any other programs open. I went to the Device Manager; Imaging devices; and my camcorder is listed and it says that the device is functioning properly. I tried to "import from digital video camera" using Windows Movie Maker and I still get the same message. I tried to disconnect the 1394 cable and turn on/off several times my camera. I still get the same message. I've never had this problem before. I have Windows Vista Home Premium.
I had the same problem since I started recording on 10 July
I have DELL Studio 64-bit pc
Sony DCR TRV350 so I use I394 cable 4 pin-to-6-pin firewire
While your DVR camera is connected to the PC via firewire, search Windows Update and install the patches to recommend.
If you have Windows encode uninstall it
reset
It worked for me
It may be useful
I checked with sony for help. They could not help, but it gave me a clue
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893
Maybe you are looking for
-
Where can I buy a second pencil Apple charge adapter. I need a trip.
-
Variants: How to assign a new value without alteration/losing its attributes?
Hello I work with data varying with some metadata stored as attributes. Data values change frequently, but the metadata values are fairly constant. I am looking for a way to update the value of a Variant while preserving its attributes (or equivalent
-
Ideas: Error messages Recent changes to your computer What you have already tried to solve the problem Remember - this is a public forum so never post private information such as numbers of mail or telephone!
-
I bought 2 ink cartrides black and each of them bled the cartridge ink in the printhead to the printer on the stand. Finally, I got an error message that says oxc18a0406. Then, I get a message of failure print on the display window. I tried to clean
-
IFRAME overlaps the rest of the editor in Design view
Screenshot: http://screencast.com/t/hgxSREILVF8pThis happens when I apply 3 reactive Bootstrap incorporate div around the iframe.Any clue?