Flash will not launch unless the Mac is started in Mode safe

Similar Questions

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• Try to do a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  Original title: how to change system locale

  So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• DeskJet HP3054A will not connect to the Mac running Yosemite

  The HP Deskjet 3054 lost connection for Mac.  Mac Airport utility assistance and the option WPS on the printer, the printer connects to the network, but when the countdown on the printer control panel reached about 15 seconds, he says "WPS Error" and the wifi of the printer is disabled.  Anyone know why the wifi the printer stops just before filling the countdown?

  Hello @3054AMacUser!

  I don't know what WiFi is turn off until you have completed the Setup, but I have another technique to get the printer on your network. I'm sure you know, a full pilot of features for the Mavericks is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks) and 10.10 (Yosemite) with only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should start then flashes, this means that it is now in autowireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup - 3054a and then a part of the MAC address, or a variant of the name of the printer. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. The default IP for autowireless is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup wireless along the left side Assistant to start to set up the printer.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you. If this resolves the issue, please make sure you click on the I accept as Solution button below so that others can see what has worked for you.

  Thank you.

• The contents of the folder WAV files will not work unless the folder is on the desktop.

  Re: Windows Vista Home Premium 32 bit W/sp2 installed.

  I created a new folder for Wav files and set it on my desk until I was finished downloading the files for convenience purposes. I then used them to slightly change the default sounds for different commands, events and others. Everything worked fine until I moved the folder on the desktop to another location. Files located in the folder assigned and uncorrupted but will no longer work when the event or the command is enabled. If I move the folder to the desktop everything works well again. No error or anything are reported. The files in the folder will simply not work unless the folder is on the desktop. Is that all I could do to fix this?

  Hello

  1. what happens when you play the file from another location, you receive error message?

  2 - is that happen with some .wav files or all files?

  3. did you try copied the contents of the file and save it to another location and check the number?

  Step 1: Restart the computer to boot to verify if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

• Win7 x 64 Media Center will not record unless the interface is open all of a sudden

  I use the Media Center to record TV on my Windows7 x 64 box with no problems until two weeks ago.  Then he stopped recording.  On further investigation I found it records when the Media Center window is open, but regular shows will not save if the window is closed.  I removed the media center did a restart and then reinstalled and the problem persists.

  Since no one was able to find an answer to this problem I restored the computer with a month of January, Image I created with Acronis True Image and all is well now.

  His shame that people at Microsoft could not find an answer.

• Yet CS4 will not go into the creation of Blu - ray mode

  CS4 running on an HP Z800 with an operating system of Windows 7. I am setting up my first Blu - ray project. The encoding of the chronology went well. When you go in, however, trouble begins. After you have filled the new project screen (title, Blu - ray, 1280 x 720, MPEG-2, 59,94 frames per second) the project window opens. Everything in the project window is still scheduled for a SD DVD. I have change the burner for the Blu - ray burner selection and then select Blu - ray. At this point, the small circular blue indicator starts to turn... and continues to do so. I let it go as long as five minutes and nothing changes. Then I go into the Task Manager and the entire computer seizes up, making me have to stop manually. What happens and why still will not go in the design view of Blu - ray?

  Thank you.

  Spencer

  Hi Spencer,.

  There was a post on this topic earlier in the forum. I can not find this post, but in this post of Pankaj suggests a very good solution to this problem.

  It could be the case that the pxhelp is not compatible with win 7 (64-bit)

  Install the last pxhelp.
  http://KB.Roxio.com/Search.aspx?URL=/content/KB/General%20Information/000070GN¶ms=

  Let me know if it solves your problem.

  Thank you

  Ramesh.

• Latitude E6410 internal display will not work unless the driver is disabled, regardless of the OS

  Hi all

  I had done research on google without end, dell community support research, etc. and cannot find the solution. The internal computer screen does not work on my Latitude E6410, except if the display driver is disabled. I tried all the drivers on the Dell Web site (including previous versions). The laptop has the card Nvidia nvs 3100 m. I've updated to the latest version of the driver available from Nvidia, and it still doesn't work. However, I can use an external monitor using a VGA connection.

  Tried with Windows 7 x 86 and x 64. X 86 and x 64 Windows 8. Windows XP x 86 same results.

  The strange thing is that if I leave the compatible driver, I can see the screen flash Dell OEM and the beginning of the GUI of Windows boot, but once the driver is started, the screen goes black.

  Ran the Dell diag and video passages. I think the problem is driver/software related like the screen works, but once the driver is loading with Windows, the screen stops video production.

  BIOS is updated. All the other drivers installed.

  Any suggestions?

  Laptop is still under warranty, so if I have to I can get a mobo replaced, but want to exclude all other possibilities first.

  Thanks for all comments and suggestions.

  OK, so I finally found the fix (literally, this morning).

  After browsing the internet, I found another site where this driver was the recommended fix and it worked:

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails?driverId=R287174

  Now, my e6410 is not the nvidia driver and intel, only nvidia card.

  If your e6410 Intel and Nvidia, you may need to play with the pilots to see what will work the Nvidia driver (I'm guessing the driver Dell A08 works well).

  As a couple of my co-workers have the same e6410 and did not have this problem, it seems that the material appears to be the culprit, but only in the sense that a particular version of the Nvidia NVS 3100 m driver works with the Dell driver A08 and some will work with the driver Nvidia 302,80 (9.18.13.280) (which is installed by Windows as well). My Dell was purchases / delivered late 2010. My co-workers that Dell was purchase / shipped in early 2011. I don't know if the short time makes all the difference in what provided Dell (or correctly, what Nvidia to Dell Dell installed), but there is a difference.

  I also tried to upgrade the driver A08 (which is the version of the driver 8.17.12.5922 dated dated: 31/07/2010) to the 9.18.13.280 (as of: 11/06/2012) and it did not work. I had to go back to the 8.17.12.5922 to get the video to work again.

  My Nvidia NVS 3100 m firmware/bios version is: 70.18.53.00.04.

  I hope this helps anyone with this issue, but for now, it seems that the A08 driver is necessary for users of this issue.

  Good luck to all with this question, but I will now consider this matter resolved.

• My creative cloud application will not launch on my Mac

  I'm running an iMac with installed on Yosemite.  I have problems with the creative application of cloud.  He refuses to run after you have clicked on it.  Nothing happens, it is not open or show no sign that it is occupied with something.  The only way I was able to fix it is to reinstall.  Then a few days later, the problem starts again.

  Help, please

  Deryck

  Hi, Deryck.

  Please try to close all adobe activity monitor processes.

  Reference: https://support.apple.com/kb/PH5147?locale=en_US

  After that go to your user library.

  Steps to follow: open finder > click go at the top of the Mac > go to folder > type ~/library and press go > folder application support > adobe > rename oobe.

  Restart the Mac.

  Try again creative cloud.

  I hope this helps.

  Concerning

  Megha Rawat

• LR CC will not launch after the download. I have to do something with my standalone LR5 first version?

  I just downloaded LR CC after using the stand-alone version of the LR5. But when I click on the new icon of LR to start nothing happens. The splash screen appears for a split second very fast, but that's all. I tried to restart my computer, but still not launch. I have to do something with my LR5 first?

  Sign out of creative cloud and then reconnect...

  can do so via CC app or open LR5, help/disconnect

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox will not close on the Mac laptop

  I had a problem and started a mysterious cleaning profile process if I remember (hours). He put a former folder Firefox data on screen then brassèrent away for so long that I interrupted him, then download a fresh copy of FF, tried to run it, but get the message "Profile missing etc.

  No menu, and I'm stuck. When I try to close/delete FF in the trash, he refuses because it is open.
  No profile is displayed when I search the library including hidden items.
  None of the solutions as stick a Kill command in the Terminal seen elsewhere works.

  Thanks Jaya.

  I gave up last night, but had one last go before before dispatch in Mac and Firefox the depths of hell.

  'Force Quit' didn't work, so I tried to copy what looked like a profile in "Old Firefox data" folder on the desktop in the folder/Library/Application Support / Firefox / Profiles.

  There was another profile folder there that I renamed it "Old etc.", then I started Firefox... and it worked!

  So I do not know if your suggestions later would have worked, but thanks a lot to them.

  Concerning
  George

• The flash will not play when the window is not in focus (FF3, Windows XP)

  I made a javascript/flash system to play sound effects based on AJAX game I did.  For some reason, on some systems (it seems to be just Firefox 3 on Windows XP), users can hear the sound effects play while the window is brought to the point.  The sound effects do not play if they reduce the window or watching a different window.  Can any idea on how I fix?

  AS2:

  var s:Sound = new Sound (this);

  s.attachSound ("yoursoundID");  Click with the right button on her in the library, export of ticks for and create link id to render sounds

  s.Start ();

  in as3:

  var s:YourSoundClass = new YourSoundClass();  Click with the right button on her in the library, export of ticks for and assign the name of the class to render the sounds

  s.Play ();

• Flash will not play on the internet

  Hello
  
  I made a few banners that play very well locally on my machine and on my machine of clients locally (within a local html page). But when my client or I put them online, they will play more (the same html-page).
  
  I have no idea why. These banners were online a few months ago, and then they worked well. I have republished only them. The only thing that is different is that I made these banners in the demo version of Flash CS4, and I have them reissued in my personal copy of Flash CS4 (were that when I made them).
  
  Anyone hase a clue as to why he won't play?
  
  You can view online here
  
  http://www.Blinq.NET/Landstede/index.html
  http://www.Blinq.NET/Landstede/index2.html
  http://www.Blinq.NET/Landstede/index3.html
  http://www.Blinq.NET/Landstede/index4.html
  

  Problem solved. Thanks to this thread , I started to search in files external and finally found the problem.
  The flash file loads an external xml file called opendag. XML and check my customer file send me I quickly saw the problem. The name of my clients file extension was tiny (opendag.xml) then he should be uppercase (opendag. XML). after changing the case of the extension of name everything worked as expected. :)

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.