flashback database

Experts - which would be the overload if configure us the database of blowback in the production db, and what are the different practices for the flashback database (11g r1). How archive flashback data differs from the flashback database?

user12075620 wrote:

Aman thanks for your response. It is the light version of the informatica ETL process that extracts data from db2 based on simple business rules. The NFR would be maximum 1-3 minutes for each transaction. Insert operation initially and after that for the most update operation. This situation suggest the flashback database?

Yet once, I would say that it is something that you must carefully test. Are all tables have equally important you need to keep data undo for each of them? If Yes, then flashback database is correct to be put in place, but if not, I suggest to use the data of Flashback of archives that would be specific to the table of interest.

HTH

Aman...

Tags: Database

Similar Questions

Can feature FLASHBACK DATABASE undo the loss of control of file/ORL?

DB version: 11.2.0.4
Platform: Oracle Linux 6.4
I personally have not tested the FLASHBACK DATABASE feature. I came across examples of logical errors such as truncate Table being overturned on FLASHBACK DATABASE.
I guess that FLASHBACK DATABASE feature may undo the loss of the data files. But will be a loss of control or the Group of newspapers online file again defeated using FLASHBACK DATABASE?

Hello

"I guess that feature FLASHBACK DATABASE can cancel the data files loss." Do not assume, check it out

Flashback database cannot cancel the loss of data files, control files and redo log files.

Flashback Database limitations

Because Flashback Database works by undoing changes to data files that exist at the present time when you run the command, it has the following limitations:
- Flashback Database can only undo changes in an Oracle database data file. It cannot be used to fix the failings of the media, or recover the accidental deletion of data files.
- You cannot use Flashback Database to cancel a file of data reduction operation. However, you can disconnect the wizened file, flash back, the rest of the database, and then later restore and restore the shriveled data file.
- You cannot use Flashback Database only to retrieve a data file. If you Flash back, a database at a time when a data file exist in the database, that the entry of data file is added to the control file. You can only recover the database using RMAN to fully restore and recover the data file.
- If the database control file is restored from backup or re-created, all the accumulated flashback journal information is ignored. You cannot use FLASHBACK DATABASE to get back to a point in time before the restoration or re-creation of a control file.
- When you use Flashback Database with a time of target during a NOLOGGING operation was underway, corruption block is likely in database objects and files of data that is affected by the NOLOGGING operation. For example, if you perform a direct path INSERT operation in NOLOGGING mode and it runs from 09:00 to 09:15 April 3, 2005, and then use you Flashback Database to return to the target time 09:07 on this date, the objects and data files updated by the direct path INSERT have finished block operation Flashback Database corruption. If possible, avoid using Flashback Database with a time or SCN coinciding with a NOLOGGING operation. Also, perform a full or incremental backup of the immediately affected data files backup after each NOLOGGING operation to ensure recovery of points in time after the operation. If you plan to use Flashback Database to return to a point in time in the course of an operation, for example a direct path INSERT , consider performing the operation in LOGGING mode.
See: https://docs.oracle.com/cd/E11882_01/backup.112/e10642/flashdb.htm#BRADV286

ORA-38760: this database instance could not turn on the flashback database

Hi guys
Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.
It's my practical database.
SQL > startup
ORACLE instance started.
Total System Global Area 608174080 bytes
Bytes of size 1268920 fixed
184550216 variable size bytes
419430400 of database buffers bytes
Redo buffers 2924544 bytes
Mounted database.
ORA-38760: this database instance could not turn on the flashback database
SQL > alter flashback database;
Database altered.
SQL > SHUTDOWN IMMEDIATE;
SQL > STARTUP MOUNT
SQL > select flashback_on from database v$.
FLASHBACK_ON
------------------
RESTORE POINT ONLY
Am not able to extinguish the flame.
SQL > select * from v$ restore_point;
Select * from v$ restore_point
*
ERROR on line 1:
ORA-38701: Flashback database log 1 seq 1 wire 1:
"/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
SQL > select flashback_on from database v$.
FLASHBACK_ON
------------------
RESTORE POINT ONLY
I also tried to create a restore point and the flashback there.
SQL > create restore point guaranteed rspt1 flashback database;
Restore point created.
SQL > select * from v$ restore_point;
Select * from v$ restore_point
*
ERROR on line 1:
ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]
[0], [0], [0], [0]
SQL > flashback data base to restore the point rspt1;
flashback database to restore the rspt1 point
*
ERROR on line 1:
ORA-38729: not enough flashback database data log do FLASHBACK.
Please help me in this regard.
Alert log file:
...
...
...
Mount of redo thread 1, with mount id 305866694
Sun 25 Oct 10:13:30 2015
Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer
From RVWR background process
RVWR started with pid = 16, OS id = 15486
Sun 25 Oct 10:13:30 2015
Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:
ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
Sun 25 Oct 10:13:30 2015
Database mounted in exclusive Mode
Completed: ALTER DATABASE MOUNT
Sun 25 Oct 10:13:30 2015
ALTER DATABASE OPEN
ORA-38760 marked during: ALTER DATABASE OPEN...
Trace file:
...
...
...
:() 2015-10-25 10:13:30.087 SERVICE NAME
SESSION ID: (156.1) 2015-10-25 10:13:30.087
ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
1. Thank you.
you experience serious problem... because usually it works very well.

Try the following:

SQL > shutdown immediate;

SQL > bootable media.

SQL > alter flashback database;

SQL > alter database backup controlfile to trace noresetlogs;

SQL > shutdown immediate;

go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

location of the trace file is located in the query:

SQL > select * from v$ diag_info;

It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

SQL > startup nomount

SQL > @trace_file. SQL

SQL > restore database;

SQL > alter database open;

So basically you are going to recreate the files of control again...

Files without a NAME during the Flashback Database

Hi all
Why, in flashback, database, retrieve a tablespace has dropped the datafile (s) consisting of within table get renamed to UNNAMEDnnn? I was going through some examples on the internet but did not find any concrete reason as to why this happens during the flashback recovery. If the tablespace can be recreated during the process, why not data files that compose?
Could someone help me please in my understanding.
Thank you.

Prithwish Adhikari wrote:

Hello

I was talking about the flashback database to retrieve a tablespace has fallen. Please find below the link

http://www.DBA-Oracle.com/t_rman_159_restore_dropped_tablespace.htm

My question is

"

flashback

database to the SNA 460217.

database of flashback to the SNA 460217

*

ERROR on line 1:

ORA-38795: WARNING: flashback has managed but open resetlogs would get error

below

ORA-01245: offline file 5 will be lost if resetlogs is done

ORA-01111: name for the data file 5 is unknown - rename it to the correct file

ORA-01110: data file 5: ' / u01/oracle/product/10.2.0/db_1/dbs/UNNAMED00005'

"

Why, in flashback, database, the data file associated with the storage space gets renamed to unnamed?

Thanks for the link and new info.

The reason is the same as in these quotes from doc that I have provided. As ORA-01111 indicates the name of the actual file is unknown so Oracle creates a unique name, then stops recovery so that you can provide the name and location.

Why, during the flashback database, retrieve a tablespace has fallen...

This formulation and the wording of the article, is probably what is mislead you. You cannot recover a tablespace using FLASHBACK DATABASE:

Here is the doc for FLASHBACK DATABASE

http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta023.htm

Notes A Flashback Database use operation applies to the entire base. You cannot flash back, individual storage spaces. A Flashback Database operation is similar to a point-in-time data recovery (DBPITR) with RECOVER , but RMAN uses flashback logs to undo changes to a point before the time runs out or SNA

See that second sentence? You NEED to recover the entire database and, as this quote from doc says, made it like CAMILLE by RECOVER.

In this example, the storage space AND data files were dropped. So please check the doc to DROP TABLESPACE

https://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9004.htm

Oracle database deletes all metadata about the space of storage data files and all the data dictionary tempfiles in the tablespace. The database also automatically removes the operating system all data files managed by Oracle and tempfiles in the tablespace. Other data files and tempfiles are not removed from the operating system unless you specify INCLUDING CONTENTS AND DATAFILES .

See? No additional data in the dictionary for the tablespace or data files. Real datafiles is more if they were managed by Oracle. But there MAY be data files of the operating system if you do NOT use this last clause.

If Oracle recreates the files using unique names and then allows you to CONFIRM that the name and location should really be.

You have a problem with that? Or just try to understand?

ORA-38754: FLASHBACK DATABASE not started; required redo log is not available

Hello
I am getting below error when executing the activities of flashback. Currently we have backups, so when I tried the command flashback in RMAN my question solved.
But if I want to do the same thing using SQLPLUS what steps should I take?
ERROR:
ORA-38754: FLASHBACK DATABASE not started; required redo log is not available
ORA-38762: redo logs needed for SNA to SNA 20062842936 20062842926
ORA-38761: redo log sequence 4 in thread 2, 65 incarnation cannot
consulted
DATABASE:11.2.0.3.0 (UAT)

RMAN will automatically restore logs archived redo required for the operation of blowback when they are not present on the drive, while (as meyssoun said) when using sqlplus required archived redo logs must be available on the disc.

Concerning

AJ

Several Flashback Database to the time prerequisites

Current time: 17/12/2013-13:22
Created restore point guaranteed: 10:53 09/12/2013.
More old Flashback Time: 10:34 09/12/2013

A Flashback Database timestamp 17/12/2013-06:30 was carried out at the 12:00 17/12/2013. (Done Resetlogs). It's my understanding that a new incarnation is created when I resetlogs. Guaranteed restore point was created under the old incarnation, but it seems to keep the archivelogs recovery guaranteed, even if the database has been Databased Flashback.
Is it possible database flashback by timestamp 10:34 09/12/2013 (oldest flashback time) even if we have already done a recovery (flashback by timestamp database) at 17/12/2013 06:30? I am concerned about corruption.
Thanks in advance.

See this and the ancestral discussion below: scene of Flashback and the database Point-in - time recovery

How to use Flash recovery only for flashback database feature box

I would use the area of flash recovery only for flashback database feature, which means, the flash recovery area will store only the flashback logs.
I don't want to use this file system for all other files, such as files of archive log, backups, copies of control files, multiplex redo log, etc.
is this possible? I want to use this function only for the flashback database option and therefore, I don't want to disturb any existing configuration in my database
including backup jobs. It will also store the Archives of redo log files in the flash recovery area to use the flashback database feature?
I can't certainly allow me to have a copy of the entire file system database as my DB size is more than the system recovery flash I have zone files.
Thank you
Delphine

user13312943 wrote:

Aman,

I think I was not clear in my question. I'll try again

My only requirement is to use the flashback database feature (or be prepared to use if necessary). I don't want to create a large file system to use the CRF to store all those files. Out of all the files are stored here a copy of the data files seems to consume more space. I see that these files are classified as transitional and permanent files. I agree with permanent files. I'm afraid that this file system can use more space if I store files of backup to disk. I want backups of databases to go to bands, not on the drive of FRA. Is this possible?

Thanks for your response

Okay, well in that case you can use RMAN and push the backups to tape drives. FLB newspapers would be stored on the FRA.

Aman...

Unable to do the flashback database!

Hi all
I activated the flashback database and created a restore point with database of flashback guaranteed so that I can do a flashback database. When I do a flashback database, its says he needs the archivelogs to perform a recovery. Flashback log usually can all have a change given in flashback logs to use for flashbacking a database. Why apply archivelogs when all the changed data does not appear in flashback log itself? please tell me.
Kind regards
Pradeep. V

Hello

Database of flashback need newspapers archives files.

"Flashback Database is similar to traditional point-in-time recovery in its effects. To restore a database to the State at a time in the recent past. Flashback Database is much faster than the point-in-time recovery, because it doesn't require you to restore the backup data files and requires fewer changes of the archived redo logs. »

"No file in the fast recovery area is eligible for deletion if this is required to meet a guaranteed restore point. However, archived redo logs required to meet a guaranteed restore point can be deleted after that only they are saved on disk or on tape. When you use the RMAN FLASHBACK DATABASE command, if the archived redo must convince guaranteed a restore point are not available in the area of fast recovery, then they are restored from backups of logs. »

REF. Doc:using Flashback Database, and Restore Points

HTH

Basic question about Flashback Database

Hello
I have a very generic question on the use of Flashback Database.
On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment. My confusion is in what regards newspapers of restoration, which are summarized in the following questions:
1. is it possible to change the redo log files, when a guaranteed restore point has been configured?
2. If so, is the Flashback to restore, point also change the size of the logs again?
I found nothing in the documentation on this subject... Where my question...
Appreciate your time taken to answer these questions...
Kind regards.

Hello

donneskold wrote:

Hello

I have a very generic question on the use of Flashback Database.

On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment. My confusion is in what regards newspapers of restoration, which are summarized in the following questions:

1. is it possible to change the redo log files, when a guaranteed restore point has been configured?

(1) Yes it is possible.

2. If so, is the Flashback to restore, point also change the size of the logs again?

(2) it will not change the size of the redo log file. Cannot resize a redo log file...

I found nothing in the documentation on this subject... Where my question...

Appreciate your time taken to answer these questions...

Kind regards.

Thank you

FLASHBACK database alternatives

We are poised to move to 11 GR 2, and so I thought I would ask the question just in case there was something again...
Are there alternatives to FLASHBACK DATABASE to restore DDL? I was hoping that there is a new feature that I'm not aware, allowing for the same functionality at a lower level, at the level of the schema. I guess that we will not here yet based on the research I have done this morning, but I thought I'd ask.
Thank you
-= Chuck

chuckers wrote:

We are poised to move to 11 GR 2, and so I thought I would ask the question just in case there was something again...

Are there alternatives to FLASHBACK DATABASE to restore DDL? I was hoping that there is a new feature that I'm not aware, allowing for the same functionality at a lower level, at the level of the schema. I guess that we will not here yet based on the research I have done this morning, but I thought I'd ask.

Thank you

-= Chuck

The alternative to 'Flashback' is just 'recover' If you want to have an option "move forward." But for "replacement" Flashback Database, I'm not sure I remember something else than he.

HTH

Aman...

Flashback Database using Data Guard environment
11.2.0.3/RHEL 5.8

I came across several documents that speak of FLASHBACK DATABASE configuration in dataguard environments. We have several
Physical DBs sleep (Single Instance & RAC) running in our shop. I would like to know two or three major (common) use of FLASHBACK DATABASE data child care settings.

I understand one of the uses mentioned in the below URL ie. a logical error recovery

http://uhesse.com/2010/08/06/using-flashback-in-a-Data-Guard-environment/

I would like to know what are the other major/common use of Flashback Database River in environment DataGuard
A few other uses:

(1) flashback allows you to test your DR. So you can activate your watch. Test the connectivity of network/applications and features on your recovery site and when done return the database to a physical standby. It must however ensure that this is allowed in your environment. In some places, I worked, it would be a big no, no, because they have no needs of data loss. However some companies that will allow as long that the watch is delivered in place for some time.

(2) in the case that you do a failover for a reason, but what has been the main site would then become available, you can flashback what has been your primary to make the eve rather than re-instatiating the database from scratch.
For example. You have a power failure on your main site if perform you a failover and your watch becomes the principal. Once it's your main site is back online, you can convert your previous primary in a day before making a full return/restoration (or any method you choose) to recreate your standby again. However you also have the option to use flashback on this database and then convert it to a watch because it would be potentially faster than the re-instantiation of the day before.

FLASHBACK Database: rman vs. sql command differences

I am new to Oracle and want to understand the difference and that is the correct way of rear turn signals to the database?

RMAN command vs SQL command on the use of FLASHBACK DATABASE

 SQL> FLASHBACK DATABASE TO RESTORE POINT BEFORE_ONLINE_TEST;  {CODE} Vs

RMAN > run {}
flashback database to restore the BEFORE_TEST_320130313 point;
SQL ' alter database open resetlogs; }

 
Referring this article on http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmflash.htm#BGBDCAFA it says we can use both RMAN and SQL command for database flashback.

Questions:

1. Difference between using RMAN and SQL command on database flashback?

2. When to use RMAN or SQL on the  database flashback?

3. Which is the Oracle recommended or best way ?

Edited by: Sivaprasad S on Mar 15, 2013 7:26 PM

Edited by: Sivaprasad S on Mar 15, 2013 7:26 PM

Edited by: Sivaprasad S on Mar 15, 2013 7:27 PM

Edited by: Sivaprasad S on Mar 15, 2013 7:27 PM

Edited by: Sivaprasad S on Mar 15, 2013 7:28 PM

Edited by: Sivaprasad S on Mar 15, 2013 7:29 PM

So when you run your SQLPlus flashback, you get the following error:

ORA-38761: redo log sequence 1 in thread 1, incarnation 3 could not be found

This means so that the sequence 1 has probably been removed from the disk and is necessary.

When you run the RMAN command look at the log what RMAN:

* journal archived for thread 1 sequence 2 is already on the disc in the file +DG_PERF_FLASH_02/TestDB/archivelog/2013_03_14/thread_1_seq_2.3612.810054205*
* journal archived for thread 1 with sequence 3 is already on the disc in the file +DG_PERF_FLASH_02/TestDB/archivelog/2013_03_14/thread_1_seq_3.1588.810054205*

So sequence 2 and 3 are already on record according to the above message.

Then you get this message:

channel dev_2: restoration of archives Journal
Archives journal thread = 1 sequence = 1

So RMAN knows he needs 1 thus sequence and restores this newspaper archive she needs for recovery.

In a Word while running SQLPlus she communicate with RMAN and restore the log file for you, however with RMAN, it won't.

You can restore the newspaper archive manually, and then run in SQLPlus that will then work.

Published by: Freddie Essex on March 18, 2013 12:46

Flashback database question
I had a thought the other day and you want to run it by other professionals. Currently, my organization runs a performance test weekly with one of our database. What typcally happens, it is that we back up the database, run the load test, and restore the database. My thought was rather than go through all that, use the flashback database and flash of the database until before the load test started. The database is on Linux 32-bit and 10.2.0.4. Am I think it properly? It should work? Let me know your opinion. Thanks in advance

Published by: kirkladb on 30 Sep 2012 15:45
Flashback Logs introduce overhead. Overhead costs were particularly bad in point 10.2 (bug 6168063) but are supposed to be lower at 11.2

Hemant K Collette

Flashback Database vrs Point in recovery time
Q1. What is the difference between a CAMILLE and Flashback Database? I am aware that CAMILLE is obviously older than Flashback DB process. Both seem to do the same thing, although CAMILLE seems to imply a recovery followed by restore (i.e. moving it to the rear then roll forward) while Flashback DB seems just involve moving backward. ? Flashback database is generally faster on this basis?

Seems to me that if CAMILLE is useful when you have file corruption / loss that Flashback Database is better to back off before an error by the user (for example a decrease of a table, etc. - but you can use the trash to sort that).

CAMILLE can correct the error of the user as well, but it seems that it would be a slower process

Thoughts?

Thank you
Jim
Jimbo, you have identified the differences in how CAMILLE and Flashback database both you can get the same point. Flashback database should be faster because you do not have to restore the entire database first; However, your window of flashback database is limited. Depending on the case, you have defined points of restoration or not and how old these points are that you can resort to the use of a CAMILLE.
- -
I do not consider set a production database in time through Flashback Database as being a practical operation since usually only one company ara has need to be flashed back then that everyone would like to continue to use the database, as it is. In this case restoring to another server/vesion of the database via CAMILLE would recreate the necessary data where other methods could then be used to extract data and migrate the production database.
- -
HTH - Mark D Powell.

Flashback Database Architecture
I went to the Architecture of database of Flashback in which he is mentioned process RVWR writes buffer of Flashback Flashback data to newspapers Flashback Database, which is used circularly.

My question to all the experts here is-
(a) Flashbacking the database depends on the content of database of Flashback logs?
(b) given that the flashback logs is used circularly and there's no archives generated, if the content is overwritten, can't go us back to the point
who's already crushed?

-Neel
Hi Neel,

I guess I see where the confusion is. In the line,.

This new background process sequentially written Flashback Database data from the buffer of flashback in the Flashback Database logs, that are reused circularly.

Note the comma after "Newspaper Flashback Database" so, 'who' does not point in newspapers Flashback Database, but in the buffer of blowback.

Kind regards
Thierry

flashback database

Similar Questions

Flashback Database limitations

Maybe you are looking for