Flex 14 - Win 7 - driver "ROOT\LENOVOVHID\0000".

Similar Questions

• NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  Hi JimmyGoings,
   
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
   
  In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
   
  You can follow the steps in the article given below to resolve the problem.
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
   
  Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
  In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
   
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• ROOT\SWSKNDISMP\0000

  Hello

  Have a strange problem in a XP Pro machine to work.  User connects, all programs loading completed, I click on my computer and then it freezes for several minutes.  Right-click on my computer, same thing.  Try going to start/run, same thing.

  I disabled all services initially upwards, and it makes no difference.  I tried to use Process Monitor to find what is happening but I don't find any problem.  I looked at Event Viewer logs and notice, at the time of what I see

  PlugPlayManager warning with

  For the client side device installation was not performed for "ROOT\SWSKNDISMP \0000" because of the user interface dialog boxes have been removed.

  I can't find anything on the net about this.  Does anyone have any ideas what this article?

  Thank you

  Hello

  Thanks for the reply.  I think I found it was something related to encryption Lumension sanctuary in the end.

• GSA h30l dvd win 7 driver

  Our Church has a desktop HP Pavilion a1730n with Vista Home Premium SP2 installed. I bought a copy of Windows 7 Pro (not HP) and want to perform a new installation of Win 7 64 bit OS. I run Win 7 Upgrade advisor and received no negative problem about the upgrade. I did upgrade and increase the RAM to 4G. So now, when I start the installation, start-up works well, but then I get an error message saying that I need to install a driver for my CD/DVD drive.  The drive is a "HL-DT-ST DVDRRW GSA H30L SCSI" device (as shown by Device Manager).  I was not able to find a Win 7 driver for this device anywhere, including the HP support site.  Suggestions on how / where I might be able to find the driver, or means of perhaps to work around this problem in the installation?

  Hello:

  The size of the 64-bit file must come down more than 3 GB.

  3.09 GB to be exact.

  Try to download it from this link...

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP 15g 007 to the win 7 driver wifi lan please help me

  HP 15g 007 to the win 7 driver wifi lan please help me

  Hello:

  Here is the link for the driver you need:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128686-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001

• ROOT\LEGACY_X5XSEX\0000. device is not present on my computer

  When I related generations, a health report on my computer system the results come back with an error warning that the device, X5XSEx, 'tv_ConfigMgrErr24 '. This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_X5XSEX\0000. and a device has a configuration issue preventing it from working correctly. Please help me find the device

  Hello

  I suggest you to perform an analysis of your computer online by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also run an analysis and audit system file checker. Refer to my previous post for more details on scan sfc.

• No hardware compatible/ID available for this device. ROOT\ACPI_HAL\0000.

  Original title: OF BUG or NOT of BEING SLAMMED

  is it ok info pilot? This is a log of a time where I couldn't then discovered online a virus was the culprit twatty. Its the "HAL" bit. Maybe its me? is normally! Val ROOT\LEGACY_KSECDD\0000 name: KSecDD hardware compatible/ID available for this device. ROOT\ACPI_HAL\0000 name: ACPI-based x 64 PC Hardware ID: acpiapic compatible ID: DETECTEDInternal\ACPI_HAL DETECTED\ACPI_HAL ACPI\PNP0303\4 & 1A8A2F7F & 0

  Hi Andy,.

  1. What is the brand and model of the computer?

  2 have you tried to update all the drivers?

  This problem may occur because of recent material changes or due to virus infections.

  Method 1:

  Since there is no compatible hardware / codes available for the device, you can review the article and analysis complete on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  We may also refer to article and check if it helps to solve the problem.

  What to do when a device is not installed correctly

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Having a problem with a driver displays a root [* 6to4mp\0000 error? __]

  get an error for this driver is not able to open Microsoft.

  Hi Silentwatcher,

  1. a recent change in software/hardware on your computer?
  2. What is the full error message?
  3. when exactly you receive this error message (at startup or when you are working with any application)?
      
  Step 1:
   
  I suggest you check in Device Manager for any yellow exclamation on any device.
   
  Reference:
   
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  Step 2:
   
  You can also use Event Viewer to search for information on the problem.
     
  Reference:
  
  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can check for more information about this at the time where it appeared and post this information here to help us narrow down where the focus.
  
  Step 3:
  
  I also recommend you to update the drivers on your computer and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (b) in Device Manager, look for the device and then double-click the device name.
  c. click on the driver tab, then click on set to update driver and follow the instructions.
   
  Reference:
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Visit the manufacturer's Web site to download the latest drivers for the hardware.

  Step 4:

  Disable IPv6:

  
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  
  NOTE: You should do this for each network connection.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Tecra M9 - need to Win 7 driver for PCI communication controller

  Hello world

  I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

  Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

  I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

  Can someone help me?

  Best regards
  trash

  If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
  Have you installed a driver for card slot?
  Try please install the driver of chip card reader and post comments.

  You will find that all the drivers on Toshiba download page?

• Satego X 200-21 L Win 7 driver for fingerprint & others

  Hello.
  After I lie mi Satego Windows 7, my fingerprint driver is automatically installed by Windows, and it there is no way to install the original driver, at the present time, is uninstalled the windows driver, windows 7 install instantly driver windows 7. The problem is that the Protector Suite software are not able to detect the fingerprints fingerprints-Driver/Hardware.

  On your Site I found an Info that my computer does not have windows 7 support from you, and I can't believe that...

  Hopefully, there is an answer to this problem, because I need the fingerprint.

  Sincerely yours.
  Maik

  PS. Sorry my terrible English.

  First don t wait for Toshiba answer here in the forum this forum is only a platform from user to user.

  With regard to the Win 7 drivers.
  As you say there is no drivers for Satellite X 200 or Satego X 200 series and so you have to collect the drivers you own hand.

  I did it with my A210.

  Fingerprint software is released by UPEK.
  I found a few Windows 7 drivers and software for Satellite X 205 - xxx on this page of the Toshiba driver we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I recommend to choose a X 205 series and tries to install the drivers Win 7 and tools.

  Good bye

• Re: Satellite C50-B-13D - cannot find the Win 7 drive wireless and WAN

  Hello

  Basically, my problem is that I do not find a wan driver and wireless for my laptop.
  I tried every single driver out there but none of them worked.

  I use a Toshiba Satellite C-50-B-13 t with windows 7 x 64 and the Atheros AR956x Wireless Network Adapter network card, I would be grateful if someone could help me :)

  Hello

  I think that the LAN card is Realtek RTL8106E ethernet controller and the wireless network card seems to be Atheros. The model detailed isn t I known

  Please check this Toshiba WLan portal for Atheros WLan driver for Win 7
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  I hope that the class driver would work. Feedback would be appreciated.

• What Win XP driver is required for the port DV on a Satellite Pro P100

  Which driver "specifically" is held by Win XP on a Satellite Pro P100 DV port?
  Toshiba provides this driver on the download page?

  Win XP does not recognize the camera into the DV port.
  It does not recognize the camera a few months ago but not detect it when it is connected.

  I don't know what changes have been made since then. Can I simply re - install the proper drivers?

  Thanks in advance.
  Tom

  Hello

  DV port? Do you mean the iLink (firewire port)?
  You have a camcorder?

  I can connect my camcorder to the laptop using the firewire cable and firewire port.
  There is no special driver for the firewire port. The Windows operating system contains the own drivers that control this port.

  Maybe you should remove the device and then Manager should restart the operating system. This allows to recognize the FireWire again

• ATI (display) required for Satellite A210-16y (PSAELE) for Win XP driver

  I can´t get an ATI driver for my laptop Toshiba Satellite A210-16Y (PSAELE)

  Graphics card: ATI Mobility Radeon HD 2600

  Win XP system

  Need help or other driver (Solution)

  How about this:

  [ATI Display Driver v8.401-07815 m - C 052613 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 770 & STAS hortMod = null & language = 13 & selOS = 10 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 60653 & OS ID = 10 & driverLanguage = 42]

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• Flex 14 Win 8.1 Atheros ar2012 bluetooth drivers

  Hello.

  My system: lenovo pentium processor clocked at 14 Flex board bluetooth Atheros ar3012. Bought Juanuary 16, 2014 3 days ago.

  Problem: finding bluetooth devices, but the connection drops immediately.

  Error message: disk error.

  On the Lenovo web the only player available for 14 Flex are for bluetooth board that aren't Atheros. I try to install but of course without any result.

  The real driver version is 8.0.1.241, I have red on the web that 8.0.1.306 should be the update, but I can't.

  Someone suggest me to use a bluetooth generic MS driver but I does not work.

  I am very worried because it seems that my 14 Flex version is not supported on the lenovo web site.

  Could someone help me?

  Thank you.

  DC

  For who would be interested, I found driver 8.0.1.305 and sets the agenda.