Flow 8: 5801ca 8 flow Bios password
Bought a 8 flow a little more than a year and my son accidentally deleted the operating system. Get a new copy of windows to reload but he keeps asking an administrator password in the BIOS. I have never created a whole first if no clue of what would be another, a preload of HP. I tried to enter the numbers that I have found in previous posts here but no luck so far. I called HP support and don't have a system scan to ensure that the material was beautiful, is it. The person I spoke with told me that I should not have difficulties to install a new OS. It says boot from efi, but it does not detect the SD card or USB key. Help, please! I would rather not a $200 weight barely used.
Hello:
Enter any password BIOS 3 times and the PC should generate a code system off (Halt).
If it provides a digital code 8 digits, enter in the box below and it the site will generate an unlock code for you to enter the BIOS.
Tags: Notebooks
Similar Questions
-
HP Jet 8 5801: Bios password forgotten on tablet of 8 HP flow
A user to put a power on bios password on their CV flow Tablet 8 and can not remember. Is it possible to erase it if the system can be recharged?
Try camel.
30673088
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Hi, I forgot my Bios password on my HP Notebook PC 11 stream, is it possible that I can get back. The password I can remember brings system 85051156 disabled.
Hello
Enter 30939198
Kind regards
DP - K
-
HP Jet Pro 11: Bios password forgotten HP flow 11 Pro
55526944
Hi, I forgot my Bios password on my HP Netbook PC stream, is it possible that I can get back. The password I can remember brings system 55526944 disabled
Hello
Enter 40484380
Kind regards
DP - K
-
HP laptop 13 Stream: Bios password forgotten HP flow
Hi, I forgot my Bios password on my HP Notebook PC 13 stream, is it possible that I can get back. The password I can remember brings system 51709253 disabled
Hello
Enter: 44661895
Kind regards
DP - K
-
HP Jet 11: user flow 11 students set BIOS password HP
Hey there,
So I wait after a school where a student has set a BIOS password on a machine power.
Disabled system code is 54748408
Is anyone able to help with this?
Would be much obliged.
Hello:
Please read the first post on the link below, which should solve your dilemma.
-
HP Jet c002dx 13: 13 Stream Hp bios password
Help, please. I forgot the BIOS password on my laptop of 13-c002dx of flow. The number of disabled system is 77469922 would of course any help I can get with this problem.
Kind regards
Roman
Hello:
Please read the first post on the link below for what to do with the system off (halt) code given by the PC.
http://h30434.www3.HP.com/T5/notebook-operating-Sy stems-and-software/system-Halt-uh...
-
HP Stream 11: Bios password
I have a flow 11 HP laptop I forgot my BIOS password can someone help me with this system to disable the code which is 59031947 thank you
Hello
Enter 46999389
Kind regards
DP - K
-
8570p: 8570 bios password
We have our password bios laptop company typed wrong and how stop us this case? Access the bios has it boot in network again.
Dear customer,
Welcome to the Support Forum HP and we are happy to help you.
This is to inform you that all professional laptops HP Probooks as EliteBook have tighter security than the consumer models infact they do not produce ' stop codes ', the password cannot be derived from the serial number and the
code is stored in a memory not volatile to remove the cell RTC does not reset the password in this case.
- Please take a look at this link.
http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility
- Replace the BIOS chip
- Please Contact HP Business Notebook of support they should be able to send a SMC.bin custom file that you can use to reset the password at startup.
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the button white Thumbs Up on the right of say thank you*.
Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.
Thank you
GBL84
I'm not an employee of HP
https://DL.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html
-
Hello everyone,
I had real trouble moving my Touchsmart 600 - 1030fr to Windows 8. Due to incompatibility of graphics driver, I see nothing on my computer after the startup screen (the one with the blue window).
I discovered that a change in the BIOS can solve this problem, but my BIOS asks me a password. I tried to reset this password in removal and replacement of the battery from the motherboard. Although he told me that the BIOS has been reversed to the factory settings, the password is always there.
Is anyone of you know what is the password to the factory settings?
Also, I read on the forum but
- The password 12345 found heredoes not work
- the text which States
"NOTE: If a new non - HP BIOS is installed, and turn on a password is used, and you don't remember the password to start the computer, see the support document of specification motherboard for your computer model to find the password reset instructions to clear BIOS passwords."
not help me in my documentation of the computer do me not any suspicion on the specification of the motherboard and it is a real BIOS HP.Thanks for your help.
Here are the specifications of your desktop HP TouchSmart 600-1030fr and it's card mother Pegatron IPP7A-M5 (E60). Please follow these instructions;
The BIOS password is used to protect the settings of the BIOS against unwanted changes. If you have forgotten your password, you can use this jumper to reset password settings.
To clear the password BIOS follow these steps:
1 turn off the POWER the computer and unplug the power cord.2. Locate the jumper marked CLEARLY P.W.
3. move the jumper on the PSWD jumper on pins 3-1.
4 wait about 10 seconds, and then return the jumper to pins 5-3.
5. connect the power cord and turn on the computer.
6 hold down the F10 key during the boot process to enter the BIOS setup. You will not be asked a password.
Diagrams are on the page "card motherboard" for your computer.
-
Need the bios password is disabled here is the code [50890822]
At the password prompt, try 45798204
-
HP Mini 1000: HP mini 1000 obtaining bios password test failed
HP mini 1000 get bios password check failure fatal system error stopped CNU9162D2D
Please help cannot get into bios or open a session
1151nr model
At the password prompt try > > e9lo3g7t7t
-
Hello
I have a compaq mini 110
having the problem with the current bios password
Error CNU9243TDY
HELP PLEASE
Hello
Try to enter: e9lo7vfati (3rd character is a lowercase L)
Rehards,
DP - K
-
I sold a lot of 32 HP ProBook 6560 b and HP Compaq Pro 6200 microtours and all machines have disappeared, but the customer called and said that they cannot pass the BIOS password. My company has not set a BIOS password, so I don't know how he can go around or where to reset. The customer is in Canada, so I can't physically touch the machines, but I would like to help if possible. The BIOS password can be reset?
This is for the 6200.
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04224518-1.PDF
Page 303.
This is for the 6560 b.
Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.
http://welcome.HP.com/country/W1/en/contact_us.html
When you talk to the HP rep ask them to increase your service request.
Or download these files.
https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0
Insert a clean USB flash drive.
Then run USB Image tool.
Choose the flash drive, and then click RESTORE.
Remove the flash drive after the restore.
Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".
At C:\OUTPUT, type CD... "And then press ENTER.
HPBR of type "and then press ENTER.
First thing is to save your settings.
Select 3 # re-program.
Press "S" to save the system information.
Type HPBR and press ENTER.
Given that your model is not listed, select "SHOTGUN".
After the reboot, repeat 'SHOTGUN' a second time.
I would like to know the result, so I can update my list.
Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."
http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html
Additional help here.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Hello, as the case may be, I have a BIOS password needs to be reset. I think that my 16 years, put a there so that I don't see what he has done. I want to get this reset if possible.
HP Mini 1000
After 3 password attempts, I get this number {retired privacy} that I realized it was the serial number. If I could get assistance on this subject, I would be very grateful.
In addition, it is my first post on the forums of HP, so if it's in the wrong place, please let me know.
Try to con.
e9lo7v3b8h
Third letter is tiny.
Just a note - if you participate in this thread, that I must inform you that these services are not endorsed by HP, and HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
Maybe you are looking for
-
Tecra A9 - Express Port Replicator: DVI does not
I recently bought a Toshiba Express Port Replicator for my laptop Toshiba Tecra A9 PTS52E because I need DVI to connect my external monitor to the laptop Tecra A9 has only a built-in VGA. After you connect the laptop to the monitor I get no output on
-
Pavilion 7000 P7-1058uk: Front facing plugs
Hi guys,.Looking for a little help.My friends bought a Blu ray player and tried to install it themselves, did not know the façade come most then removed the front panel connectors.I don't really do other than replace drive HARD odd hardware or ram et
-
Example: Pavilion g6: missing HP Pavilion g6
My friend has an HP pavilion g6, product number: D1C17UA-#ABA, serial number: (personal information by moderator), System Board Id: 184. This friend of mine asked me to install Windows 7 on it. What I did and I installed the ofr everything EXCEPT PC
-
Windows Update error 80070643__
I enabled the functionality of MS Office Update. When I tried to install all of Office 2003 updates, the updates have not been installed and the message. The Office 2003 has been successfully installed on Windows 7 Ultimate version. I followed the
-
My system features, i7 thinkpad w540, 16 GB of ram and a 256 GB ssd. Using MSE as av with AMBM pro whenever I start my system, win 7 x 64, I get the following error in the event viewer: Custom dynamic link libraries are loaded for each application. T