Flow on the client machine connected RAS VPN multicast

Similar Questions

• Maxl on the client to connect to the server computer running remote essbase

  Hi all

  I am able to connect to essbase on a client computer using the link:

  http://ts119licalnn.AC.local:9724 / easconsole

  However, when I try to connect via MAXL on the client machine, I get the following error...

  
  Essbase MaxL Shell - release 11.1.2 (ESB11.1.2.2.100B2166)
  Copyright (c) 2000, 2012, Oracle and/or its affiliates.
  All rights reserved.

  MAXL > connection JDOE JDOE212 on ts119licalnn.ac.local:9724;

  ERROR - 103 - Essbase unexpected error 1030818.
  Error - 1042017 - network: Timed out before receiving all the data.
  ERROR - 1030818 - login failed. Please check if the server and port are correct.
  If you receive timeout or handshake failure, please check if you have tried a bitch
  CT to secure without keyword secure or clear with the keyword secure port...

  Is the host name in maxl the same name as the name in the link easconsole? do I need to configure anything (tnsnames.ora) to maxl work?

  Thanks in advance.

  The essbase server name is ts119licalnn, it is displayed in essbase servers in EA.

  By not using not not the default Essbase node ' EssbaseCluster-1', he revealed the port number EAS uses to connect to essbase, in this case, 1443.»

  The problem was that I did not have the correct port number, y at - it an easier way to find the correct port number?

  See you soon,.

• How to force the client to connect to the specific access point?

  I have a client that connects to an Access Point to the upper floor.  The connection is "Very low" and pings are restless.  Is there a way to force the client to connect to the point of access on its own soil in the hallway.

  Access Points using 1131AG; WLC2106

  PSK + WPA2

  Thank you

  There is not a way to force the client to use a specific side access point controller of things.  According to the specifications, the client decides when and where to associate.  You can try to disable some of the rates below data or lower power tx of the AP to reduce the coverage of each access point cell.  By doing this, the client cannot see the other as favourable AP.

• connectivity from client to client on ASA5520 RAS VPN

  All,

  We have a firewall ASA5520-K8, through which client internal connect and receive IP 10.26.206.0/23 addresses. They are not however unable to ping or DRC to the other. A co-worker and I both connect to the firewall and VPN and I tried to make a packet trace of my internal internal assigned IP to its assigned IP. The package is removed in step 10. As a beginner to ASAs, I need help.

  Phase: 10
  Type: NAT
  Subtype:
  Result: DECLINE
  Config:
  NAT (outside) 10 access-list VPN_CLIENTS
  match outside ip 10.26.206.0 255.255.254.0 outside of any
  dynamic translation to the pool 10 (199.x.x.x [Interface PAT])
  translate_hits = 5268139, untranslate_hits = 397840
  Additional information:
  Direct flow from returns search rule:
  ID = 0xc89cc760, priority = 2, domain = nat, deny = false
  hits = 5364150, user_data = 0xc89cc6c0, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
  SRC ip = 10.26.206.0, mask 255.255.254.0, port = 0 is
  DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
  ============================
  Username: weichenberger index: 3455
  Assigned IP: 10.26.206.174 public IP address: 70.x.x.x
  Protocol: IKE IPsecOverNatT
  License: IPsec
  Encryption: AES128 AES256 hash: SHA1
  TX Bytes: bytes 7573810 Rx: 2810147
  Political group: Group of Tunnel JDL_VPN_Users: SecureAuth-access
  Opening time: 08:25:57 Wednesday, January 14, 2015
  Duration: 0 h: 46 m: 42s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no

  There are two necessary configs:

  (1) NAT-Exemption for the outside interface. It is similar as what you have inside.

   access-list outside_nat0 permit ip 10.26.206.0 255.255.254.0 10.26.206.0 255.255.254.0 nat (outside) 0 access-list outside_nat0 

  (2) allow SAA send traffic on the same interface, where it was received:

   same-security-traffic permit intra-interface

• FRM-92095 Oracle Jinitiator too low Version - dsiplayed on the client machine

  Hello
  
  When I connect my Windows/Xp client computer on my Linux R12.1.1 server. I get the following message:
  
  'FRM-92095; Oracle Jinitiator Version too low. "Please install the 1.1.8.2 version or higher.
  
  I don't really know what that means.
  
  Can someone give me the steps on how to solve this problem - when I open a form on the client computer.
  
  Thanks in advance for your help.
  
  Published by: user565503 on August 26, 2011 21:52

  When I connect my Windows/Xp client computer on my Linux R12.1.1 server. I get the following message:

  This worked before? If so, the changes have been made recently?

  'FRM-92095; Oracle Jinitiator Version too low. "Please install the 1.1.8.2 version or higher.

  I don't really know what that means.

  Oracle EBS R12 comes with JRE, so you are not supposed to download any version of Jinitator. If you have already installed, uninstall it (via Control Panel > Add/Remove Programs) and then check.

  Can someone give me the steps on how to solve this problem - when I open a form on the client computer.

  Can you reproduce the problem by using a different browser? What happens if you try from another machine?

  If please run AutoConfig and make sure that it ends successfully.

  Thank you
  Hussein

• Overview of the data in the service Console Regional on the client machine generates an error.

  When I saw the data in the Regional (version 11.1.1.4) service console on a client workstation, I get a "cannot sign in the field. "Error of initialization of the ORB.java.io.FileNotFoundException: domain.db (access is denied)" error. Now, if I use the client URL to Admin Console on the same computer am able to preview the data correctly. Also when I saw the data on the client installed on the server can't correctly preview data. Just when I use the Admin console client installed on a workstation, I get this error. Any suggestions?
  
  Thank you
  Ted.
  
  Published by: Teddd on March 26, 2013 14:51

  TimG says:
  I certainly say it is your problem (I don't even know how to see / control when installing local vs. web-Launcher finds Java, or if indeed there is a difference) but I think it's plausible enough to a test value

  In 11.1.1.3 the Regional (not the web version) service console will resume java installed on the machine, if Java has not been installed it will use the settings in the admincon.lax file for example lax.nl.current.vm=E:\Hyperion\common\JRE\Sun\1.5.0\bin\java.exe
  So basically if you have installed Java 1.6 it will pick up and use that otherwise it will use the default JRE INSTALLED with Hyperion. The web console needs a version of Java installed in order to use Java Web Start.
  And I agree to have a different version of Java that sustained can cause problems using the Regional service console.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The client Machine Info

  How can I get these last applications opened in the client using the form 10 g machine

  You can use welutil pacakge to get the files to the client directory % RECENTLY.
  then analyze each file in the directory.
  each file is recently open files on the client computer

• What is the rate of transmission between the virtual machines connected to the same virtual switch?

  Hi guys,.

  I am trying to determine if the rate of data transmission between virtual machines connected to the same virtual switch is equivocal to 10 GB ethernet or faster.

  Thank you

  MK

  If it's the same vSwitch in the same ESX, should be the speed of the bus

• Where are the time Machine connects to Sierra?

  Running Sierra on a late 2009 iMac. Time Machine works well and updated regularly. However the Time Machine buddy Widget shows all the information. Study using the Console indicates that the TM log entries are to be absent in Syslog. Nothing shows using the "backupd" as a filter on the system log. Under Diagnostics and usage data, I see information for the type of backup and "NOERROR" for completion.

  Does anyone know what has changed in the Sierra? Or is it my unit?

  Boyfriend of Time Machine does not work with Sierra

  Console is 'redesigned', extraction of newspapers can be difficult...

  But!

  You can copy the lines of command in Terminal to see the logs of Time Machine ("TM on the fly" and "History of TM")

  Since this discussion started I see how activity time Machine Console with macOS Sierra;

  By copying this command (from John Galt) line in the Terminal I can view TM-history-logs for a few days back;

  Newspaper show - predicate "subsystem =="com.apple.TimeMachine"'-info | grep ' upd: (' | cut-c - 1-19 140-999)

  This command line also gives information of a TM running 'on the fly', but after the TM copy I have to put in the line of command again TM start-up for a new copy (I can live with that...)

  By copying this command (from chockosmund) line in the Terminal I see what TM is ding on the fly, but did not get the newspaper story.

  the log stream - style syslog - predicate 'contains a [cd] 'Time Machine' senderImagePath' - info

  This command line is that Terminal shows constantly new TM-logs.

  Thank you John Galt and chuckosmund!

  I have a separate Terminal office-space computer were I can watch how TM is progressing.

  Hope that answers your question.

  Jur Kuipers, Netherlands

• How to remove the file from the client machine

  Hi all
  We use the database: oracle: 10 g,.
  and forms/States 10g (developer suite 10g - 10.1.2.2).
  
  can someone help me how to remove the file from the client computer in the location specified using webutil or everything
  (I tried with webutil_host & client_host but this only works for the application server)
  Thank you.

  Hello

  Checkbox not tested.

  PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
  IS
  
  --------------------------------------------------------------------------------
  -- Open a stored document --
  
  --------------------------------------------------------------------------------
  LC$Cmd Varchar2(1280) ;
  LC$Nom Varchar2(1000) ;
  LC$Fic Varchar2(1280);
  LC$Path Varchar2(1280);
  LC$Sep Varchar2(1) ;
  LN$But Pls_Integer ;
  LB$Ok Boolean ;
  -- Current Process ID --
  ret WEBUTIL_HOST.PROCESS_ID ;
  V_FICHERO VARCHAR2(500);
  COMILLA VARCHAR2(4) := '''';
  BOTON NUMBER;
  MODO VARCHAR2(50);
  URL VARCHAR2(500);
  
  Begin
  
  V_FICHERO := V_ID_DOC;
  
  LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
  LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
  --LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
  LC$Path := 'C:';
  LC$Fic := LC$Path || LC$Sep || LC$Nom ;
  
  If Not webutil_file_transfer.DB_To_Client
  (
  LC$Fic,
  'TABLE_NAME',
  'ITEM_NAME',
  'WHERE'
  ) Then
  
  Raise Form_trigger_Failure ;
  
  End if ;
  
  LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
  Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
  LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
  If LN$But 0 Then
  Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
  Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
  LN$But := Show_Alert( 'ALER_STOP_1' ) ;
  LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
  Raise Form_Trigger_Failure ;
  End if ;
  
  If Not webutil_file_transfer.Client_To_DB
  (
  LC$Fic,
  'TABLE_NAME',
  'ITEM_NAME',
  'WHERE'
  ) Then
  NULL;
  Else
  Commit ;
  End if ;
  LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
  
  Exception
  When Form_Trigger_Failure Then
  Raise ;
  End ;
  

  Sarah

• Font change in accordance with the resolution of the client machine

  I have a Flex application in deployment now that resizes based on the size of the screen. One screen, on which it is running is a huge flat screen of 48 ", and it should also run on different portable small etc..
  
  Resizing works fine, but I would also change the fonts based on the resolution of the client computer. I have two questions:
  
  (1) is there a way to detect that in Flex
  (2) how you dynamically set policies on barregraphes and DataGrid, you can just reference to a function rather than a variable or do you need to use a kind of special method like "fontFormula" or something?
  
  M.

  It works for me:

• PDF report of economy on the client machine

  Dear all,
  
  I have a form where the user can select the path he wanted to save report PDF (generated by the Bulder report) at (I use Webutil). I put this path as DESFORMAT before calling the repot, but when the report is run, it is saved on the server (application server), if the same path exist on the server (for example, c:\temp), otherwise it gives an error.
  
  How can I do this?
  
  Concerning

  Hello
  I guess all the pdf files that you generate in the c:\temp directory. Otherwise if the files are in c:\temp\data then you will need to change in the webutil.cfg file. So, according to your webutil.cfg file the function call can be like that...

   lResult := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
                 ('C:\TEMP\ABC.TXT',
                  'C:\TEMP\ABC.TXT',
                  'TITLE',
                  'PLEASE WAIT...');
  

  Or otherwise if the files are in C:\TEMP\DATA, and then change the configuration for the below setting and try the function as below...

   transfer.database.enabled=TRUE
   transfer.appsrv.enabled=TRUE
   transfer.appsrv.workAreaRoot=
   transfer.appsrv.accessControl=TRUE
   transfer.appsrv.read.1=c:\temp\data
   transfer.appsrv.write.1=c:\temp\data
  

  And the function like this...

   lResult := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
                 ('C:\TEMP\data'ABC.TXT',
                  'C:\TEMP\ABC.TXT',
                  'TITLE',
                  'PLEASE WAIT...');
  

  Make sure the file is readable on the ACE and the C:\TEMP directory is available on the client side.
  With the help of example that you can find in the webutil demo. See the link below.
  http://www.Oracle.com/technology/products/forms/htdocs/webutil/webutil.htm

  -Clément

• How to enter IP address of the client Machine.

  Hello...
  
  I want to enter the ip address of the client computer and store it in a field.
  My client wants to capture the ip address so that it can easily emerge from
  What specific work of the client system is done.
  
  If there any pre defined function or syntax is here to get the IP...
  
  with cheers
  Sprity...

  There will be a webutil.pll in your devsuitehome/forms library
  First copy in your working directory and compile it.
  then attach this library to your form.
  Create a char type textfield and button

  in the trigger when button pressed

  To write

  : blockname.textfieldname: = webutil_clientinfo.get_ip_address;

  You must run the form with config = webutil

• RemoteAccess VPN does not, the client VPNC connects but no connectivity

  Hi all

  I configured cisco ASA 5520 VPN remote access, Cisco vpn client connects very well and both phases are upcoming but aren't encapsulating packets phase ipsec. and ima could not reach remote subnets 192.168.10.0 and 192.168.180.0

  kindly help me to solve the problem... Here's the relevant config

  Thank you
  Mikael

  config====================================================================
  allowed to access list acl sheep line 20 extended ip 192.168.10.0 255.255.255.0 172.23.20.0 255.255.255.128
  allowed to access list acl sheep line 20 extended ip 192.168.180.0 255.255.255.240 172.23.20.0 255.255.255.128

  access-list 1 permit line splitTunnel_raacl extended ip 192.168.10.0 255.255.255.0 any
  allowed to Access-list splitTunnel_raacl line 2 extended ip 192.168.180.0 255.255.255.240 all

  allowed to Access-list ra_acl line 1 extended ip all 192.168.10.0 255.255.255.0
  allowed to Access-list ra_acl line 2 extended ip all 192.168.180.0 255.255.255.240

  AAA-server non-retail-VPN protocol Ganymede +.
  AAA-server non-retail-VPN (inside) host 192.168.200.14
  3n0cr1ght5 key
  Non-retail-VPN (inside) host 192.168.10.9 AAA-server
  3n0cr1ght5 key

  mask IP local pool ra 172.23.20.2 - 172.23.20.125 255.255.255.128

  internal RAVPN group policy
  RAVPN group policy attributes
  VPN-idle-timeout 30
  VPN-filter value ra_acl
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list splitTunnel_raacl

  type tunnel-group RAVPN remote access
  attributes global-tunnel-group RAVPN
  address-ra-pool
  Group Policy - by default-RAVPN
  IPSec-attributes tunnel-group RAVPN
  pre-shared key xxxx

  Crypto ipsec transform-set esp-3des esp-sha-hmac ravpn-series

  Crypto dynamic-map 23 RAVPN set transform-set ravpn-set

  card crypto ENOCMAP 4-isakmp dynamic ipsec RAVPN
  ========================================================================

  Output
  2 IKE peers: 94.58.71.99
  Type: user role: answering machine
  Generate a new key: no State: AM_ACTIVE

  # sh crypto ipsec peer of his 94.58.71.99
  address of the peers: 94.58.71.99
  Tag crypto map: RAVPN, seq num: 23, local addr: x.x.x.x

  local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  Remote ident (addr, mask, prot, port): (172.23.20.2/255.255.255.255/0/0)
  current_peer: 94.58.71.99, username: shanilra
  dynamic allocated peer ip: 172.23.20.2

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
  #pkts decaps: 117, #pkts decrypt: 117, #pkts check: 117
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 0

  EDIT: Sorry, just see that I read your config wrong. The vpn-filter is OK, but with split tunnel always not necessary.

  Your vpn-filter-ACL is false (mixex source and destination). Please, remove the vpn filter from your group policy and test again if this works. Looks like you want your customers only to reach the two given networks. For this you need the vpn filter anyway, because they are the only networks that are reached in the split-tunnel-config.

  Sent by Cisco Support technique iPad App

• Loading slowly VDR devices after connecting - 100% cpu on the client machine

  Whenever I connect to one of my vdr devices (5 of them), it connects, but takes a good 5-10 minutes for all events and loading failures.  As is the case, it makes the cpu on my workstation peg up to 100% continuously during the time it takes to load all the events etc.

  Version of the VDR is 1.2.

  Any ideas or suggestions?

  Thank you

  Under the reports tab in the camera VDR console, select the events you want to purge, right-click and then click on remove.

  Sean