FLV controls

Similar Questions

• FLV help

  I created a movie .flv to a quicktime movie using the flash 8 video Wizard and the flash 8 importer. I then inserted a flv in the .fla file component. Every time, when I export the movie, absolutely nothing comes on the page, not even the .flv controls.
  
  I have checked everywhere and made sure my paths were correct. I don't know what else to look for.
  
  I tried to check the file .flv itself and is not reading when I double click on it and when I put on a Web server and try to call, it gives me just lines and lines of code (I don't know, maybe this is what its supposed to do when you call in and of itself, just putting it out there).
  
  I don't know if there is a program with my coding or if there is a problem with my component. Any help would be greatly appreciated. Thank you.
  
  -Keith P.

  Thank you guys! Finally figured it out! The actionscript code is equal to 1.0. I changed it to 2.0 and it worked. Knowing that my working flv file pointed me in the right direction!

  K

• Flash video thumb... Click to play

  I'm looking for a solution, much like youtube and others, where you can load an image, so that when you click on the video to load/play. Thanks for any direction you can give...

  Here's a sample:
  http://www.johnkalnin.com/FlashHelp/FLV-control-by-image3.html
  and the Flash 8 file:
  http://www.johnkalnin.com/FlashHelp/FLV-control-by-image3.fla

  I have use a skin that I should have. If you cannot know how I did this work let me know and I'll walk you through it.

  The jist is the film doesn't autostart, it hides behind a picture. The image is a button, when you click on it it makes the flv game and he turns himself invisible. You need the instance on the image names and flv for actionscript code work.

• Can you put video controls on a .flv video?

  I have a .flv file in my .fla file.  However, when I play the movie, it just plays the film along the timeline.  Is there a way to put video controls on this file?  Or do I need to use the videoPlayback option?

  If I don't need to use the videoPlayback, how to make sure that only the video still works, even if I move it to another computer (because the references to the movie will change)?

  Thank you very much in advance.

  -TitanVex

  If you move the swf file, you must move the FLV with her.

• Why are the actual FLV Play Back wider than my video clip controls

  Hello

  I created a video clip renders as a wmv file.

  I then covered to FLV format with Flash Media Encoder CS5.

  When I import video into Flash CS5 using either / import of video files

  or by clicking on the icon of the source in the components panel read FLV

  the left and right sides of the component are wider than the video clip real about 20 pixels.

  Like the game, I would support controls to be of the same width as the video clip.

  Please see screenshot below-

  

  Hello

  Thanks for your suggestions!

  Looks like the problem was something to do with the settings I chose when you return

  my video clip in WMV.

  I exported the first Pro under Microsoft DV AVI video then converted

  It FLV in Adobe Media Encoder and playback component is now the same

  width as my video.

  Please see screenshot below-

  

• power of the controls in the sections of flv

  Hello

  I have a small video program that I need help.  I'm using a single FLV file. In addition to the play/pause and stop the drive interface, I have a number of chapter buttons, which again successfully for the corresponding points in the FLV file. I need to find a way to capture and hold start them and stop times of each of these chapters so that when I am in each chapter, the stop and buttons game will refer both to the chapter and the control section, that is to say in chapter two by clicking stop will reset at the beginning of Chapter 2 not the beginning of the FLV file.

  Not sure if it has built-in properties and methods I can use, or I need to create something custom.

  Thank you

  Matt

  You have an array of landmarks. If you have the time and a name for each landmark, you can use seekToPrevCuePoint() to back landmark that starts a given section and then use stop() to hold on to that cue point.

  To stop on any given cue point, you can use a function like this:

  my_FLVPlybk.addEventListener(MetadataEvent.CUE_POINT, cp_listener);
  function cp_listener(eventObject:MetadataEvent):void {
            if(eventObject.info.name == "cue point name") {
                 pause();
            }
  }
  

• Controls FLV not listed do not

  Hey, people,.

  I have a swf file that is supposed to read a flv within a drive.  When I test locally, it works fine, but when I upoaded all files (swf, flv, and SteelExternalPlaySeekMute) on the server, when I call the main swf on the page, it does not show the controls.  If I just choose the SWF in a new browser, however, it works very well.

  I think that the problem may lie in the fact that the html file that loads the swf file is not in the same filepath in the server as the swf file.  If the SWF is looking for the controls swf in HTML, and not directory the directory its in?  (However, which is not supposed, because it seems to load the FLV without problem, and they are in the same directory)

  In the html file, I changed, it was the path that loads the swf, rather than simply refrence the current working directory, it refers to the absolute directory residing in the swf.

  the path of the skin is relatively to the location of the html file.  so, use this path when specifying your skin.

• Adding controls to FLV video

  Hello
  
  I have a file .flv I need to fall into a Flash file and export it as a .swf. He needs controls (pause/play, etc.). I tried the tutorial in the help section, and it did not work. Does anyone know of a good tutorial for:
  
  -Creating a Flash file
  -Added my .flv
  -Adding controls feature
  -Export to a .swf for use on a web page
  
  Please keep in mind that I am a novice in Flash.
  
  Thank you
  
  -----------------S

  OK - I think I got it to work.

  If I want to read the Flash 7 (mx 2004) video using Flash 8, I need to do this:

  -Open a new Flash document
  -Go to publication settings and select 'Flash 7' in the menu of the version tab "Flash".
  -Import the video from the scene, select the progressive download
  -Do not choose any controller when importing

  The film imports with a white box, and the element of "reading" appears in the library. When I export my .swf file, it has a lined with white around the video controller which is inconvenient in the respect that it increases the width of my swf, but it's not too bad. The controls extend downwards when you mouse over them, so I had to match the background of the flash file in the background of my HTML page in order to not create a weird color below the video box.

  I hope this help anyone looking to this topic in the forums!

  Thank you for all your help

  ---------------------S

• ? play several .flvs rule with single control bar?

  It's bugged the heck out of me.
  
  What I'm trying to accomplish:
  
  -load two external .flv files
  -two files begin to play simultaneously
  -control of games bar controls the two videos
  
  Why do I need to do this:
  
  I have a Flash environment. Each character in the environment is a .flv file. The characters interact with each other. The way I see it, this can be accomplished one of two ways:
  
  -two (for the two characters) flv files that run to the same exact duration
  -several flv for each character for always interaction files (I'm a little against that, because I care for the videos to load completely before starting)
  
  
  What I tried:
  
  -The FLV PlayBack component: this does not really work, since reading skin is visually connected to only a single video. In addition, it only controls a single video.
  
  -Playback FLV Custom AI: I still have to make it work even with a single video. However, I wonder still if it is perhaps the best solution, since I can place the PlayBar anywhere on the screen and should be able to generate scripts for two video playback controls. As I have said, however, I was not able to run at all.
  
  -J' built an original prototype of this in Captivate. Play several videos to YouTube (simultaneously or not) with a bar reading single skin for the whole project was easy. The problem I ran into was that the components of test in Captivate question did not what I need (aging of and becomes inactive when selected, able to try again)
  
  
  Can you help me?
  Thoughts? Suggestions? Anything is appreciated.

  I took end way think this, and it's the simplest of answers...

• How can I control a FLV video using exhibit main bar (not FLV skin)?

  I need to have the ability to play/pause a FLV video on a slide with the bar of main games.  Research showed me that in previous versions, there is a checkbox "synchronize with project" which allowed this.  I don't find this in version 8.  Is there another way to do this?

  Hello

  Welcome to the Adobe Forums

  Try to insert the video like video instead of event video synchronized slides,

  Then down below it will be an option to distribute video through the slides and you can select Slide n to n (where n is the number of slide).

  Hope that this will serve as your need.

  Concerning

  Himanshu

• FLV auto-play and controls

  I am following up on the counter with my FLV Player. I don't know why it does not work now, it worked for me in a previous project (without the meter back/next that I've implemented just, thanks to Rob Dillon). Files FLV is in the same directory as the SWF container, but I can't do automatically move on to the next FLV (which are contained in a table) or use the back/next buttons to do the same. Any ideas on what I'm missing? Thanks again for the help!

  UPDATE #2:
  Understand the second half of the problem. I had coded the functions of the buttons incorrectly and moved the service counter inside the functions of stage NextScene and thank you. Final code below.

• How to create a binding of the program file in the control panel of binding together?

  I get this message when I open a FLV file this file does not have a program with her association to perform this action. Create an association in the set Associations control panel

  It has to do with media decoder.

  Really, the best way is to install VLC media player.

  It's free.
  He plays almost all files formats.
  It is used and recommended Robert.

  Here is the download link:

  http://www.videolan.org/VLC/

• My .flv embedded video is blurred in WebHelp

  I have included a video (.flv) in a webhelp project and while playing online, the video is not as strong as the original. It doesn't matter if I play the webhelp online or local.  I see not all controls to set the video quality.  If I play the video in VLC, I can do full screen and the video is razor sharp.

  Ideas?

  Stretching is not so much about the aspect ratio, but more about what makes the video appear larger than the original size. In this case, the system tries to fill the gaps, in creating a blurred video.

  Before RH2015, incorporating a video works best if you set the HTML code. This way, you will have less surprises. I did not at all FLV so I'm afraid I can't test it myself.

• You can remove the audio of a FLV video output?

  If you can, how would we go to this topic? I want a button to press, leading to a different scene that begins with a clip, but I can't have audio cutting in the sense too quickly. Is it possible to use the code to fade audio FLV / output?

  addEventListener (type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void

  the 3rd param is the parameter uscapture.  events (during the capture phase) travel from the top of the screen (the scene) down to the interactive objects in the foreground and continue down to their descendants. then they start to "bubbles" upward.

  default event listeners capture events during the phase of propagation so a descendant object will have its listener triggered before a parent.  But if you activate the capture parameter, you can get the parent to listener to trigger in front of a child.

  the 4th parameter is the priority setting and it allows you to control the order that listeners are trigger for the same interactive object with the same type of earphone.

  and the 5th parameter determines whether the listener is low (i.e., the object can be gc would be while the listener is still active).  This param is buggy is my experience and ensure an object is finally going to get gc would you need to use weak references and explicitly remove the listener.  but the behavior depends on the version of flash player and I have not tested in several versions, so maybe that it works correctly now.

  (p.s when you use the adobe forums, check useful/correct, if there is.)

• . FLV appearing don't not in publication .air (Flash CS6)

  Hello

  I made an interactive story with Flash CS6 and ActionScript 3.0, the characters are all .flvs they are animated and transparent backgrounds need so that these can be placed on a separate background. However when I publish the piece as a .air, install and run the application, the .flvs do not all appear. The only advice I could find is to make sure that in the .xml found in the same folder as the .air that transparency is not defined 'transparent', the value is "false", I tried to change to 'true' just to check, and it did not work. Any help what so ever would be greatly appreciated.

  Thanks in advance,

  Chris

  This can have many reasons

  1 make sure that you add all the necessary assets manually in export-air options

  2 videos have some restrictions as their dimensions must be divisible by 16, also flash could have problems with the audio so its not standard 44.1 kHz but 48 kHz

  etc.

  Make sure that you check 'allow debugging' in the export options for the advice which was wrong.

  Also just a tip: I don't see how this is a good design to characters in a story interactive everything, you must convert them to the format swf and do movieclips out of them.

  This will keep your manageable size and give you more control.