FLV file does not start or play

Similar Questions

• corrupted Windows 8 bcd file - does not start

  My error code is 0 x 0000034 Startup Configuration file is corrupted. Windows 8 will not start, I am able to boot from the Windows CD, but none of the recovery system commands will not work on a corrupt BCD file. The BCDEDIT commands will not work, and the bootrec command will not work. Does anyone know how to rebuild or recreate the file BCD on Windows 8? In addition, a method on Windows 7 runs on windows 8. I have 8 64 windows.

  Table of contents for the double post:

  Windows 8 - missing directory BOOT & BCD file

  I work with a Dell Inspiron ONE 2320 the upgrade of windows 7 64-bit for windows 8 64-bit. After the upgrade, I lost the STARTUP directory and the BCD file I can't rebuild the BCD and impossible to create the STARTUP directory. How can I fix?

  Hi Albert

  You can try to reset as Winston has suggested that he will solve the problem. Before attempting to reset the PC, you can try refreshing the computer and check.

  When you refresh PC applications provided with your PC or you installed from Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  I hope this information helps,

• Firefox does not start .oam file with scrolling parallax effect and if y > 740

  Hello!

  I try to explane my problem. If I place a parallax scrolling page of a lively .oam file, the .oam file does not start (as in firefox!) if the file is higher than y = 740 and if the animation with a scrolling parallax effect.

  Maybe just visit this site, you can see the problem. Please look with firefox!

  http://OAM-test.BusinessCatalyst.com/index.html

  I placed three times exactly the same oam-file with the same scrolling Parallax effects, but with different positions only y

  in safari and IE, no problem. but the third CAO does not start in firefox.

  any suggestion?

  by the way... Why firefox cannot load fonts in the oam file?

  Thank you very much in advance for any help. really need a solution as soon as possible. If there is no way to do it with oam-file perhaps another format without flash (gif)?

  Kind regards

  Ivo

  To work around the problem, you can configure initial field scroll to 1, it works with the third file oam.

  Thank you

  Sanjit

• Captivate playback does not start

  I must have a parameter that incorrectly, but when I import a Captivate swf into my presentation & post, when the presentation gets to the slide with the Captivate swf, swf file does not start automatically. It is used to... I stirred some presentations, Breeze, who Captivate inserted in them (and they still work), but suddenly I can't make new presentations that work. I don't really know what I've done, but if anyone has had this happen to them, I would of course appreciate an overview!
  
  Thank you!

  What version of Flash Player you have installed? If you have 9.0.16.0, that might be the problem. I was running Flash Player 9 and with problems of content publishing Captivate integrated in Breeze 5. They would not play at all after the publication of Breeze 5. Like you, this problem has not occure initially during development.

  I uninstalled Flash PLayer 9, already the old version 8, and then I could publish the content Captivate embedded in the files of the breeze.

  This combination has worked for us:
  Breeze Presenter 5.1.269
  PowerPoint version 2002 and 2003
  Flash Player version 8.0.24.0 or 8.0.22.0

  If I went to Flash Player 9, Captivate content has stopped working again.

• WIA does not start

  Failed to install scanners or cameras. WIA file does not start automatically or manually.

  Hi LeslieAltschuler,
   
  -What is the brand and model of your printer and scanner?
  -You receive an error message or error code when trying to install the printer/scanner? If Yes, indicate the same.
   
  Check if the printer/scanner model you are using is compatible with Windows Image Acquisition (WIA). Here is a link that you must visit to check the same.
   
  Windows XP: List of Scanners that are taken in charge by Windows Image Acquisition
   
  Additional reference on:
  WIA Film Scanner compatibility for Windows XP and Windows Me

• DVD Menu with animation does not start

  I have the DVD menu with background animated and submenues that are built in the same way but the animation and the sound does not start, what is the problem?

  In sound Previewmode opens, but not the animation of backdround when exporting the project for even the sound of the file does not start.

  These problems may be due to corruption of project or odd causes. If you continue this, I create a small test project and add main menu and a sub. See if it works.

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player does not open or play. WMV files.

  Windows Media Player does not open or play. WMV files. I am running Vista and everything is automatically updated the newer versions. Windows Media Player worked fine a month ago, when he would be dismissed intermittently just opening. Restarting the computer should solve the problem. Now, however, I can not open the drive or open any. WMV files that used to play properly in the past. Reboot and clear the cache and cookies does not work. On the other hand, the Media Player for Internet Explorer plugin works very well. Please notify. On the other hand, the Media Player for Internet Explorer plugin works very well.

  Hi bydybydy,

  Step 1: Run the Fixit available in the link below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank

  http://support.Microsoft.com/kb/925704

  Step 2: Download and install the update available in the link below:

  FIX: Windows Media Player 11 cannot play WMV files that contain multiple video streams

  http://support.Microsoft.com/kb/947403

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SWF file that points to the FLV file will not play

  Hello
  
  I think there must be something on the side configuration server that prevents this...
  
  You have an idea why this phenomenon happens? I have these two files identical cfm that point
  in a swf flash on the site # 1 and # 2. The Flash animation plays in DreamWeaver.
  He played locally on the server to test my pc and he plays on the #2 website but not on the #1 site.
  
  Any recreated again, check paths even launch SWFs before downloading them and everything worked.
  Once they are on the production server, the swf file does not load the file *.flv external Flash. I checked the permissions of
  files and directory via a DosBox and all look good. Oh and I have the latest version of Flash installed plugin.
  
  I'm puzzled!
  

  Thanks Nickels55. Who did the trick.

  Thanks for the feedback-Adobe Community Expert dan mode.

  Dan

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I started &#62; run &#62; ncpa.cpl I get message error "file does not have a program associated with it... »

  XP SP3 with ALL critical & almost all critics not updated.

  I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.

  But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".

  Thank you

  Steve

  HDTV - calibration.com

  Ok.  That's what steps 1 and 2 of the instructions in KB 871122.  You are now up to step 3.

  Now we will solve the problem "file does not have a program associated with it".  Go tohttp://www.dougknox.com/xp/file_assoc.htm .  Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.

  Because this association should not have broken, I suggest that you download, update and run

  Malwarebytes Anti-Malware and

  SuperAntiSpyware

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

  Windows media player

  HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

  Hello

  ·         What is the format of the files that you play when you get this error?

  ·         Do you get what this error during playback of all files or a particular file?

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.