Foglight - made graphic

Similar Questions

• Skyrim - using the integrated graphics card

  My Dell has a built-in Intel and a dedicated Radeon card. For the high range, such as Skyrim 3D games, I obviously prefer to use AMD, but the game is auto detection of the onboard. I've tried everything. I tried all ini files and that you can find no reference to intel or AMD, display or whatever it is. I have manually disabled the card intel in Device Manager, but then the game comes with intel base made graphic, I went into the bios to try and the value of the main graphics card to AMD, but I can't find it anywhere in the bios (which has very very few options) I also used the AMD Control Panel to set the game to run using maximum performance , but continues to use the map intel. Any advice would be appreciated, thanks Matthew

  You cannot set the AMD GPU as primary - it is not connected directly to the screen.  Only the GPU from Intel is directly connected - the AMD GPU is NOT a dedicated GPU.  It's a video coprocessor - all passes of video data by the Intel GPU on its way to the screen, even if it has been processed by the AMD GPU.

  If you selected the AMD GPU for the game by using the catalyst control center, that's all that is needed. No matter where you look under Windows, you will always see the Intel GPU as active.  It is a system controlled by software - controlled material no.

• Version graphic FC CFSCRIPT?

  Hello

  I am running CF 9.01 developer on Windows 7. I am a component and want to do it in the style of CFscript. Is there a version of cfscript cfchart, cfshartseries, cfchartdata, etc. which can be accessed from the script of CF or is - it possible to access the jars that provide this service in Cold Fusion from a user defined cfc?

  Thank you

  Mark

  Mark Mongeau wrote:

  I am a component and want to do it in the style of CFscript. Is there a version of cfscript cfchart, cfshartseries, cfchartdata, etc. which can be accessed from the script of CF or is - it possible to access the jars that provide this service in Cold Fusion from a user defined cfc?

  It is possible to create a chart on Windows 7, CF 9.0.1 and cfscript. Some examples of code (there was a lot of examples like him in the past in this forum):

  serverComponent = createobject ("java", "com.gp.api.jsp.MxServerComponent");

  chartDescription = createobject ("java", "com.gp.api.jsp.MxChartDescription");

  myApplication = getPageContext () .getServletContext ();

  serverInstance = serverComponent.getDefaultInstance (myApplication).

  chartDescription = serverInstance.newImageSpec ();

  chartDescription.width = 400;

  chartDescription.height = 300;

  chartDescription.type = "PNG";

  chartDescription.style = "

  " ;

  myChart.model =" 200020012002200320042005productsfresh«;»

  WriteOutput (serverInstance.getImageTag (chartDescription,"/CFIDE/GraphData.cfm?graphCache= wc50 & graphID =" "));

  You might ask: whence the code. A sample in the webCharts engine supplied with ColdFusion.

  See Open Directory "trace" in the ColdFusion installation directory.  The webcharts engine is fitted with a designer. It helps you design a chart, without writing any code. Then, you can just copy the code that the designer used to generate your graph of the sample. Neat, huh?

  Double-click webcharts.bat to start the webcharts Designer. You will get a user interface showing a graphics library. Here are the pre-made graphic samples. I use such a sample to illustrate this approach.

  In the left list, click to select, for example, «3D line, curve, Step,...» ». Appropriate graphic sample images should appear. Click the second image (the one showing 2 smooth and wavy curves). Press OK.

  You get all the details for this chart type. Down, left, are tabs showing you the Design, the Style, the model and the code used to generate the graph. The code is in JSP. If translate you it in CFML, you will get the code I gave above.

• M40-232 and ati x 600 128 MB video ram

  I have a toshiba satellite m40-232 with graphics card ati x 600, ati x 600-128 MB dedicated od ram and 128 MB of system ram but I only dedicated. Where can I select o use also system ram? Thank you

  Hello

  This made graphics card supported memory really and has a 128 MB DDR chip.
  It s not a shared memory. But nevertheless as far as I know in the BIOS, you can find the settings AGB. Here, you can change the settings too.

  Good bye

• After a time when the data added to the interface user blocked - WPF

  I am currently using WPF graphics.

  I have created a simulation that describes the problem that I have experienced in my application (attached).

  I have two sons, we generate data (in my application gets the material data every second) and the other copies the data in the user interface (copy the data to a variable, which bind to the data source).

  Every second I get 1000 points and adds them to the data. The first seconds it works well, after a while it gets stuck.

  I added a listbox control that displays the time, need to add the variable data and gradually increases.

  

  I have two questions:
  (1) did whenever I have add data, it attracts all the existing data again? If so, theres a way to improve or prevent this behavior?
  (2) how many points can represent the graph at a glance? (which is the limit of the graph)?

  Thank you

  HODAYA Shalom.

  Your example updated debugging, I think that the question is the Dispatcher.Invoke calls that you use to communicate with the user interface thread. Since you use the delegate only, all calls are sent with Normal priority, which means that events of low priority (as made graphic, or updated on day of data binding to scales) can get transformed. Using a lower as priority Render four Invoke calls not glued to the UI in my tests.

• Sweet video for Dimension 4700 card?

  Sweet video for Dimension 4700 card?
  I was given an old Dell 4700 of Dimension that has the integrated VGA video connector and never had a video card. The computer came with a modem only in the PCI 1 slot and the PCI Express x 16 slot is empty.
  I read old posts here on this subject, but most is outdated and some recommend cards that use too much power for the 305 watt power supply.
  It's so confusing when I look at say a HD5450 there are so many brands and versions his crazy confusion.
  Thanks for any help
  Ron.

  AMD made graphic processor chips and sells them to manufacturers of cards, who exploit them in turn to produce finished their own individual designs graphics cards.

  The 5450 is cheaper than the 6450 and consumes less power, but it is less powerful and has fewer features. My favorite range low graphics card is the 6450 Sapphire, and I bought some of them for use in old Dells.

• MacBook Pro running Mavericks: error starting Pro first

  I have a Macbook Pro 2011. I have Premiere Pro CS5, CS6 and now CC 2015. CS6 has worked for a long time, then came all of a sudden with this error:

  "Adobe Premiere Pro can't find capable video game modules. Please update your video display drivers and start over. »

  So I reinstalled CS5 of the thought of disk, it might be useful. I have CS5 on the Macbook, and it works fine. I can't figure out how to get CS6 once again, even though I have the serial number for it. I installed CC 2015 but it comes up with the same error for CS6 start-up.

  I went into System Preferences and made graphics of course automatic switching is turned off, rebooted, and it always comes up with the same error starting. What can I do to run the CC 2015? I'm fine with moving permanently to CC 2015 so I can't get CS6 once again, but I had rather not step back with CS5 if I can understand this problem

  Any advice will help. Thank you!

  First of all, can help http://www.adobe.com/downloads/other-downloads.html

  Second, the Mac utility for adapters double http://forums.adobe.com/thread/1017891?tstart=0

• Graphics update where MCs are made nukes MCs.

  Flash CS5

  I have a chart that has been imported for lib, it has points each with a line of text, all converted to the path beforehand. I drag and drop to the stage and resize smaller. I then did video clips of each spot and its associated text.

  I realize now the text is too small on stage

  I redraw the chart to the source with larger text and save it under the same name. Import it to lib choose to replace the element. Existing work on my stage disappears and a cancellation of the edition won't bring him back. Even the scene seems to change size.

  I try a simple experiment.

  1. New file (either the #1 file) and make a green circle, convert it to chart, call the greencircle and set x 0 y0
  2. Copy this lib graph to the Clipboard
  3. New file (either the file #2) and paste this greencircle for lib, made drag on stage and make red, set it to x 0 y0
  4. Make a movieclip call redcircle
  5. Return to the #1 file and make the green purple circle.
  6. Copy paste chart greencircle for lib file #2, chose to replace existing.
  7. The red circle disappears.

  
  When I try that once again the red circle going purple. But twice before he disappeared, even if the red circle made a chart not an MC.

  I know not graphics have updated on stage when Java updates, then why the evanescent Act, which I was able to replicate at the start with a simple test, but now I can't figure who intends to still refuses to update. If I paste the graphic of the text in small print in a new lib files and drag deposer file onstage, then paste this lib chart updated, by selecting the update, it updates on stage.

  Envirographics

  Try to save your xfl to fla and make the changes, you then have to change back.  I think you get into a wobbly situation with xfl where the directories created to represent your library assets into a very strange state. And remember to use version control.

• Mac user but seen the light... Made the T410 (i7) switchable graphics?

  Dear all!

  I am happy to find Lenovo forum and have the question above firmly answered before you buy this machine.

  Please answer and thank you in advance! Now is 01:48 in Hawaii, so I'm heading to bed and look forward in all the answers later on Thursday.

  Thanks again!

  Sincerely,

  newOwner

  The Thinkpad only in the current generation which has switchable graphics card is the T410s, all other laptops using the Integrated GPU or Nvidia GPU.

• Why MUse made so many copies of graphics

  I was looking at the pictures for a site file. Muse has created dozens and dozens of copies of the original graphic that I placed in the site

  TH:

  This is a small site and yet Muse has created nearly 500 graphic files

  It doesn't hurt, but it's sure a hell of a lot of congestion

  Kirby

  They probably have effects requiring a pixelation applied. What is the URL for an example of page/site?

• Basic not made on Lenovo Thinkpad x61t graphics

  I'm a graduate student that uses PyMOL and FoldIt to work. I am able to run these applications, but the 'graphic viewer"(where I would see the macromolecule) appears transparent and show only the content of substantive underlying demand.

  This is not unique to these programs, but also to graphic resources low as UltraStar Deluxe. I think that it is a driver/software problem because the computer is capable of correctly reproducing PyMOL sessions Kubuntu Linux when running.

  My computer is a Lenovo Thinkpad x61t. The graphics card is a Mobile Intel (r) 965 Express Chipset Family, which I understand is integrated on the motherboard. I am running DirectX 11. I'm running the latest Lenovo driver, a proprietary version of the Intel driver. I can't install the Intel generic driver as a .exe, but I can choose the 'Disc' option to provide the path to the .inf. file unfortunately, this does not solve the problem. I figured well initially (reading other complaints) that the problem might have something to do with the Lenovo driver doesn't support OpenGL, but I don't know much, and I am unable to change the driver in any case.

  This problem persisted on multiple reformat and reinstallation of Windows 7 on this laptop. If anyone can lead me to a solution, it would be greatly appreciated! Thank you!

  So nevermind, problem solved. I removed my drivers, then had Windows Update automatically. For some reason, it worked this time, even though I had been struggling for months to understand this.

• iMac 27 2010 graphics card / ram problem

  Hello - read through the form and try to isolate the problem.  A week ago my end 2010 iMac 27 I7, 12 GB of Crucial Ram, OSX Yosemite went screwy - icons went fuzzy, and the system has just stopped responding. I tried not just pull the plug, but the computer was out of order, so I had to pull the plug. Please keep in mind it was a day hot here in New York and I've come for a quick moment to remove some files and did not close the windows a turn on the AC, so they probably overheated system or so I guess

  Anyway, after a few hours and I came back home and turned back on the iMac. Immediately, I noticed some pale red bans on the screen. The system has been restarted slowly and then it stop at halfway however and just go to the gray screen. I did a reboot, re-installed the operating system made the system check, but the failure of operating system to kick when I do a normal restart, and I am only able to operate the computer in Mode safe.

  Is there a way I can understand if the RAM is the question, the graphics card, or if it's the OS? A faulty graphics card will prevent the system from starting normally? I have the same question when I open it on safe mode?

  I'm trying to see if there is a way to save the iMac and get more use out of it, but at the same time a few years if it's gong to fix an expensive that I can't do on my own, so maybe its not worth what's now 5-6yrld of fixing iMac little matter how the computer cost me back in 2010.

  Thanks for your help and sorry if this question has been answered countless times before.

  JB

  Most likely graphics card problem...

  Note:

  One way to test is to boot from the HD, (now shift key at startup), run utility disk in Applications > utilities, then highlight your reader, click on repair permissions, test for problem in Mode safe...

  PS. secure boot can remain on the gray radian for a long time, let go, he's trying to repair the hard drive & trash/rebuild the cache files

  Reboot, try again.

  If it does so only in ordinary chest, there could be a problem material such as Video card, (the Quartz is disabled in Safe Mode), or airport, some USB or Firewire devices, or the module in part 3, Check System Preferences > accounts (users and groups in later versions of OS x) > login items window to see if she or something relevant is listed. Or a stray process eating RAM.

• Last updated: El Capitan made Nvidia drivers not compatible

  I have the 346.03.15f02 latest drivers Nvidia Web installed and everything was going along great last El Capitan 10.11.6 running.

  Last updated 09/01/2016 security has been applied with success and after seeing a few graphical anomalies during the boot sequence made me know something was wrong, I saw a message saying that OS X uses OS X default drivers.

  I went into the preferences of the Manager of Nvidia drivers and Nvidia is now incompatible.

  Is it possible to do this backward? I just created this model, so I did not set up, still time Machine...

  Sorry, but do not treat us non-Apple drivers. Ask Nvidia or look for a pilot updated on their website. OS X contains all the relevant drivers for all GPU compatible, Apple supports.

• Mac Pro equipped with graphics cards

  (1) Apple certified repair done remarkable work or replacement of these cards, seemed as it did thousands due to schools, universities, colleges had all the problems that I did.

  (2) now did the-d option to initialize the data sent to Apple and have assigned Senior Adviser.

  (3) most recent problem is error codes and system dead slow on my second Mac Pro 6 hearts. Now, does not see my Amd hardware, which is extremely strange to say the least.

  (4) 2 weeks no words or calls returned Senior Advisor, still more serious delays to write make some income with new Mac Pro.

  (5) what did not work is not, the example is iMovie stutters sound.

  (6) final Cut Pro sound of of synk

  (7) k video from my new iPad Pro 4 who made 4 K video sent to dump not recognized on Mac Pro system after that reminder of graphics cards has been made.

  so waiting for words from Apple on the d option played 4 times.

  < published by host >

  Nope... but... all I can do is give you my experience. I got a G5 liquid that had major failure 3 times (was under AppleCare) and has been replaced with a Mac pro. I guess you have tried the usual, killer stuff pram resetting the PMU, trying to reinstall and update the operating system and various applications to this topic and all that, and... nothing. Apple does not read or respond to these forums, cmdrDenis, this place is strictly a user forum, and that's all. Save all your receipts, paperwork, document as much as you can and when you talk to Apple or an adviser, be polite, but pragmatic.  Screaming, yelling, Ranting and raving you will get very far.  If you go to apple.com/feedback and leave a comment there, someone can get back to you. Call the main line from Apple can be useful too, but about what, when and how

  I can't say. Apple * may *, in its sole discretion, replace a machine that has had too many major repairs, or repair, but it's Apple to do.  Maybe if you call your local Apple place, explain the situation calmly and kindly and ask to speak to another senior consultant or Manager, perhaps they can help you.

• Latest version of Firefox has been paralyzed for handling web page graphics

  I just updated to Firefox version 38.0.1 from version 35. This late update is due to an unfortunate twist practices for a long time, which requires Firefox installs to be interactive. Now an update takes several hours of phone + line tied up, so it is done only rarely.

  Once I could just download the package during one of my occasional bouts (of our days, almost every week) a connection high flow, pass on to my computer via a USB flash drive, and then install Firefox in moments, without any internet connection active. It was much higher than the current method.

  The point of this letter, however, is a major fault in the 38.0.1 version, which makes it useless for most of my work. I need to know how to return to a better version of Firefox that works properly. > > > > > > Put online, publish, I found the link that hopefully, gt back me to the old version, but I still want this post somewhere where he could get some attention because the current situation is extremely poor. < < < < < <

  For more than a year, I wanted to write about a problem that became much worse with this latest version of the browser, but I never managed to work up the energy and the time - my problems made the slightest difference to anyone developing the browser code, I always asked? It looked like a long shot.

  Much of my time online is spent downloading of pages of graphs, tables, diagrams and occasional pictures. Because, I suppose, my normal 52 KB/s connection speed is too slow, after 15 to 25 minutes needed to fetch the page of interest, a large percentage of these illustrations show only one link, not the image itself. Right click on the links provided, one option "reload image" from the context menu. By clicking on that would load the image on the page, in place, making it usable article (it is often necessary to get a dozen or three dozen, graphics in this way).

  An interesting aspect of this finishing process, it's the very many graphics loaded so completely, almost immediately. Some required 20 seconds, 30, 60 or more, but not the majority.

  Failure that I often wanted to communicate to the subject, but never fact, unfortunately, is that some graphics began to load with the page, but somewhere before they finished, perhaps 10%, maybe 95%, they would stop. The lower part of the graph would then show just a black fill, or sometimes a white fill (empty). These partial graphs has never had the option "Reload image" from the context menu.

  The option 'Copy image location' has been in the context menu... If I chose, I could try to paste it into a new tab address bar or a new window. This produces the exact same partial graph, indicating that it must be taken from the browser cache/history/something already downloaded part, rather than its source.

  "Reload image" always read the chart full, but using the location of the image on these partial graphics, even though it was clearly a web address, has no. To get the complete picture for these partially loaded graphics, I had to close the browser that by my settings, erases always each part of the story. Then using the location of the copied image above, I was able to load the graphic on the web. This has never been useful for the study of an article.

  A few times, I've experimented by 'reload the current page'. It was clear that it was not as a useful solution. It can load charts missing or incomplete, taking another 20 minutes to redo the page, but it also ignored, or only partially loaded, graphics that were present and complete the first time the page is loaded. What are the images have been provided only in the form of tags, or are incomplete, seems to be random.

  Another flaw is that, pretty often. the images I had to reload were released on the page that it loaded, but then disappear before the end of the loading page. This seems particularly bad performance, since the data obviously had been correctly downloaded. However, I could at least reload these images after loading the page.

  I experience a number of times where I had access to high-speed broadband. I've never known completely empty or partially loaded images, so I assumed the difficulty as a feature of my line connection telephone slow. NO, I can't afford a connection high speed, period, for sure, even if having one would be very nice...

  In the old version of browser, where 'Reload image' was an option, the obvious difficulty for the problem above with partially loaded images would have been to always provide the option "reload image", no matter if the image was missing completely, partially loaded, or fully charged - always reload the website, never to leave already downloaded material. Simply put the reload option in the context menu for all charts and check that it still works properly.

  Now, Firefox version 38 is much worse. It doesn't have the option "reload image". In its place is 'View image' replacing my entire page loaded painfully slowly, with the missing image. If the image is completely absent (a single a tag e.g. "fig 3a"), I can use the 'copy the location of the image', which paste it in a new tab and get the picture on this new tab. It is a very inconvenient way to try to read an article, especially when 27 graphics didn't load the first time.

  I only watched two these pages since the browser update. None of these finished with images partially responsible (although they all had two images only as tags), so I don't know if the location of the image 'copy' to a partial image, pasted into a new tab always will only provide the same partial graph. However, this problem, compared to the current impossibility of 'image' Reload in place on the page, is indeed minor.

  I can't do the job that I have to do if I can't get the downloaded material. I need a previous version browser which has at least the Reload menu popup "image" option I hope this option will also discount on future versions. It would be really good if the image reload option would be still available for each graph, as described above. Right now I need to know how to revert to the version 26, or a later version that still has the option "reload image".

  It sounds like the extension to display selected Images is the best solution, but for later use on the context menu: If you hold down the CTRL key when you click on View Image, it will be directed to a new tab, and if you hold down the SHIFT key when you click on View Image, it will be directed to a new window.