Sweet video for Dimension 4700 card?

Similar Questions

• Dimension 4700 desktop will not start

  I have a Dimension 4700 desktop computer that has been sitting in storage for a while. I wanted to start and see is there something to this subject that I had to save or erase the hard drive. As far as I know, it was working fine when it was put away. Now it won't start at all. Here is what I know-

  Dimension 4700

  Service etiquette: ADMIN NOTE: Service tag deleted by privacy policy >

  running Windows XP Home Edition

  Power light turns on and remains lit (green). DVD players do a rotation test (but will not read a boot disk). The hard drive light comes on and stays on.

  Does NOT display a Dell spash screen. The screen is blank (black) with the exception of a simple white flashing cursor (line underscore). It crashes in this condition.

  Does not meet the keyboard commands (ctl + alt + del, esc, f8, f11... etc.). Does not respond to reset (press power button in disable).

  Diagnostic lights are lit on the rear panel. A, B, C are all stable and green. D is amber and regular.

  All inner and peripheral cables seem to be properly fixed.

  When the power to the hard drive cable is removed, it does NOT POST beeps (the condition is the same).

  I can't get to the Setup screen. I can't boot from a cd. I don't get any sound signals (beeps).

  It is out of warranty, and troubleshooting knowledge base sent in a recursive loop items that never exceeded the step #2. Someone at - it suggestions?

  Because it has been stored for a while, first stage, with the PC off, is to reinstall (unplug then plug back in) all the memory, PCI cards such as video, sound, etc. and all cable connectors.  Make sure that when you plug the points back in that you get fully and correctly reinstalled.     Back off and see if that makes a difference.

• Dell Dimension 4700 upgrade tips Help!

  Hello Dell Community, I currently have a Dell Dimension 4700 and hoped to upgrade my computer to a computer game, with a budget of around $100-200.

  I wonder as to the game going, that upgrades would produce the biggest change and progress in the game? I'm hoping to improve up to 2 GB of Ram and add a video card, but don't know if it is the best choice to go.

  I have studied this subject and found several posts in the forums, but they were all overwhelmed and I hope to get some knowledge as well as recent graphics cards or Ram that can improve my FPS in game and all around my budget. Thank you.

  Record of Dell:

  Name of the operating system: Microsoft Windows XP Home Edition
  Version: 5.1.2600 Service Pack 3 Build 2600
  System model: Dimension 4700
  System type: X 86-based PC
  Processor: x 86 family 15 model 3 Stepping 4 GenuineIntel ~ 2793 Mhz
  The version of the BIOS/Date: A10 of Dell Inc., 04/01/2006
  SMBIOS Version: 2.3
  Total physical memory: 512,00 MB
  Available physical memory: 191,89 MB
  Total virtual memory: 2.00 GB
  Available virtual memory: 1.96 GB

  Majera

  Sorry, but there are very few, you can upgrade on a child of seven years 'obsolete' 4700, to make a system of 'game '.

  Better to put the money upgrade, to buying new desktop PC.

  Bev.

• firewire iEEE1394 for pavilion p62125 card

  Hello, I'm looking for a pci card that will work with my Pavilion p62125.  I have a camcorder Panasonic that I try to get the video off of and my pc does not have dv or ports d-link.  I have a hub, but it does not work.  I need a port for a firewire iEEE1394.  Thanks for any help you can offer.

  What you need is an Express of PCE x 1 1394 firewire adapt card to install in one of the PCI Express x 1 slots you desktop PC.

  Here are examples at NewEgg.com

• After I upgraded to windows vista 32 bit to windows 7 Ultimate edition 32 bit, I can't run 3D games, saying that there is no video on my computer card.

  I have check the dxdiag and found at the Directdraw, Direct3D and the AGP is not accelerated. And there is no button or option for me to activate one of them. I remember once I installed the suite ati catalyst, I couldn't find in the program file. my graphics card is ATI Radeon Xpress 200, and the installed DirectX is version 11.

  I tried the methods in http://support.microsoft.com/kb/191660, but none of them works.

  What else can I I / check?

  OS: Windows NT 6.1 (Build: 7600)

  CPU: Processor GenuineIntel unknown @ 3069 MHz with 959 MB of RAM

  Video: No video

  Please activate the Direct3D acceleration. You can do this by starting dxdiag and allowing the Direct3D acceleration in the name1/2 after installing DirectX 8. 1 b (or later version) and the latest drivers for your graphics card.

  ----------------

• Upgrading RAM Dell Dimension 4700

  Hi all

  OK I will try once again to this type. The first time I tried to type this my Surface frozen without reason and had to be properly closed. OK, I'll update the RAM on my Dell Dimension 4700 and I need help and advice before I do. My Dell says it has 0.99 GB of RAM installed. I looked inside and found that there are two sticks of 512 MB of RAM. I found (2 sticks of 1 GB) 2GB of RAM for Dell Dimension 4700 at amazon.com and intend to purchase that. So when I update the RAM I get two sticks of 512 MB and replaced with new 2 sticks of 1 GB from amazon? Are there precautions should I take? (In addition to wear an anti-static wristband) Thank you.

  Before you buy, go to http://www.crucial.com/usa/en/systemscanner

  Download and run the Crucial scanner.  This will tell you:

  • supports memory of how many are in your computer
  • How much memory is in each
  • the maximum memory that can be installed on your computer and how
  • the right kind of RAM in your computer

  Do not buy crucial, but pay attention to what the scanner says that you need.

  In short, if you have only two supports from memory, then Yes, you need to remove the memory that is in them to put in new RAM.  However, just because you can buy two memory modules of 1 GB does not necessarily that your motherboard will accept them.

  When replacing memory.

  See http://www.crucial.com/wcsstore/CrucialSAS/pdf/install-guides/ram/crucial-dram-install-guide-en.pdf

  • take precautions against static - touch the chassis first; do not touch the contacts of the RAM modules
  • Unlock the pliers and pull it up
  • Orient the new module properly - there is usually only one way correct to put in - and push straight down firmly, but without wavering until closing locks.

• have dell dimension 4700 xp need help with outlook express I have error message and can not send email

  I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

  Thank you, Gina Davis

  I have

  He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

  How to add your Hotmail e-mail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

  If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

• Dell Dimension 4700 fack back to factory settings

  I want to configure the pc back to factory settings.  Was told by the Geek Squad just insert the disk operating system & click 'recover to factory settings', but that option is not there.

  Windows XP Professional

  Hello

  Here is th manual for your system http://support.dell.com/support/edocs/systems/dim4700/en/om/Y69490LRs.pdf

  How to restore http://www.ehow.com/how_6776528_restore-dimension-4700-factory-settings.html?ref=Track2&utm_source=ask

  Concerning

  GT4U

• How to burn videos from my sd card on my digital camera or a cd dvd disc

  How can I burn a video from my sd card from my digital camera for each CD or DVD

  What is the video file format (extension)?

  First... copy the video to a folder on your hard drive. Could be your Video file
  or could be a new folder on your desktop.

  You want to burn a data CD / DVD data only for the purpose of archiving (backup)?

  Or... you want to burn a video CD / DVD video... who will play in a DVD player?

• How to import videos from my SD card?

  Original title: import

  How to import videos from my SD card?

  Hello

  1. What is the brand and model of the computer?
  2. your computer has any reader build-in card?

  You should have in the generation of drive or external card reader to read the contents of the SD card. You can also use the device, which uses this SD card, to import the contents of SD card.

  See the bottom of the article for more information on the SD card.
  Memory and storage
  http://Windows.Microsoft.com/en-us/Windows7/memory-and-storage

• Failures of Dell Dimension 4700

  Hello! This is my first post. I came here for support on one of my older Dell systems today, my only first. (I did recently acquired another). It was my first computer, a helping hand me down from my parents back in 2011. He never ran well. I blamed it on a lot of things to the wire of time, starting with the aging of processor Pentium 4, bad caps on the motherboard to hard drive errors. USB works, extremely slow performance, stops and weird/sali post codes at the start are all symptoms. Once I hit him (not very hard) once out of frustration and she completely restarted. Then, it worked fine for months. This weekend, however, I was reached behind the unit to plug in a USB key (the front USBs long quit date, as I mentioned above) and it stops without any sign of restart. I have tried unplugging for a while, and then reconnect (it worked in the past, it has happened before), but it did not help. I checked on the inside, and the Green LED on the motherboard was off. Then, I started to suspect the PSU. A paper clip test confirmed my suspicions... and I could see the capacitors that have failed inside during the inspection below. I tested the power supply that failed but in my other 4700, and it failed. I borrowed the PSU work from this computer and put it in one with faulty POWER, but instead of starting block flashes an orange light by the power button. The power failure took the motherboard with it: (?) Any help is appreciated! Thank you!

  CryptoCracker

  Hello! This is my first post. I came here for support on one of my older Dell systems today, my only first. (I did recently acquired another). It was my first computer, a helping hand me down from my parents back in 2011. He never ran well. I blamed it on a lot of things to the wire of time, starting with the aging of processor Pentium 4, bad caps on the motherboard to hard drive errors. USB works, extremely slow performance, stops and weird/sali post codes at the start are all symptoms. Once I hit him (not very hard) once out of frustration and she completely restarted. Then, it worked fine for months. This weekend, however, I was reached behind the unit to plug in a USB key (the front USBs long quit date, as I mentioned above) and it stops without any sign of restart. I have tried unplugging for a while, and then reconnect (it worked in the past, it has happened before), but it did not help. I checked on the inside, and the Green LED on the motherboard was off. Then, I started to suspect the PSU. A paper clip test confirmed my suspicions... and I could see the capacitors that have failed inside during the inspection below. I tested the power supply that failed but in my other 4700, and it failed. I borrowed the PSU work from this computer and put it in one with faulty POWER, but instead of starting block flashes an orange light by the power button. The power failure took the motherboard with it: (?) Any help is appreciated! Thank you!

  CryptoCracker

  Is the power button LED, solid or flashing and what color?

  What is the reading of the 4 on the rear panel diagnostic lights?

  The tool and Dimension 4700 Service Manual/Diagnostic Guides are here:

  http://downloads.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4700_service%20manual_en-us.PDF

  Are there messages of error, or 'tweets '?

  Yes, it is possible that the motherboard is shorted [aka fried]

  Bev.

• Dimension 4700 does not

  Hello world

  I have a Dimension 4700 with installed XP3 that recently started having a problem shortly after the start. The owner told me she was online when she got a BSOD. However, she cut the power without note the exact error message. Since that date, when the PC boots, it stops responding almost immediately after loading. The mouse & keyboard seem to work, but I can't click on the icons for items in the start menu. CTRL-Alt-Delete to open the Task Manager, but it does not meet the shutdown command.

  Virus-free, ran clean in safe mode, and even tried to change MSCONFIG for diag mode, but no change. I did a complete scan and it found no errors.

  Before you do a system reinstall, can anyone think another possible cause?

  Thank you in advance.

  If you end the Explorer process in the Manager of tasks and then restart it by running ecplorer.exe is the system restore?

  Probably, you should perform a new installation, see my Guide for reinstalling Windows / A Clean Windows XP installation for detailed instructions:

  http://philipyip.WordPress.com/Dell-community-forums/

• get the error message"Windows Media Player has encountered a problem while playing the file. "When tying to play videos on my memory card

  get the error message"Windows Media Player has encountered a problem while playing the file. "When you try to play videos on my memory card

  Hello

  1. What is the format of the video file you are trying to play?

  2. do you have any third party audio or video codec installed?

  Follow these methods.

  Method 1:  Run the troubleshooter in the Windows Media Player settings.

  Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:
  If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

• Dimension 4700 dvd - rom & dvd +-RW nor working

  I'm not either of my dvd to work on my dimension 4700 players.  When I look in Device Manager, there a yellow circle with a black exclamation point next to each of the disks.  The first is HL-DT-ST DVD - ROM GDR8163B and the second is PHILIPS DVD +-RW DVD8631.  When I click on them they both say "Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39) ».  The use of the device is turned on.  I tried to uninstall and reinstall but still the same thing.  I tried to uninstall and reboot my pc, but when I go back into Device Manager, they are both with the same error code and the sign again.  I tried to download the driver from dell, but it tells me that it cannot find the device.  Help!  I need my readers!  Thank you!

  
  

• support for CUDA graphics card

  Hello!

  I just installed a trial version of Adobe first Pro CS5.5.

  A popup window tells me to download a graphic CUDA driver for a better rendering.

  In the list of supported graphics cards my card does not appear.

  NVIDIA GeForce 9500 GT

  In the details section of this card, it shows me the following: 32 CUDA cores

  Does that mean now that it supports CUDA or not - is - do I have to install another driver for it - I'm confused...

  BTW. system requirements recommend RAID 0 for uncompressed video.

  So far, I use different fast HD but no RAID 0. In what scenario will be victim?

  concerning

  Here is the list of the supported graphics processors: http://www.adobe.com/products/premiere/tech-specs.html

  The GeForce 9500 GT is not in the list of supported cards. A lot of cards that have CUDA is not supported by the CS5.5 body. It is not strictly CUDA body makes use of all areas... Organization requires a handful of specifications that CUDA is the primary but not the only one.

  Your card meets most of the requirements of the software, but only the cards that Adobe has actually tested and approved will be listed as supported cards. Only these cards are supported by default in the functioning of the body CS5.5.

  With that said, you can ALWAYS try to get the body to use your GeForce 9500 GT GPU using the 'hack' that a lot of users have posted in the forum (I never had to use it, or know the link, but I think that if search you the forum for 'hack GPU' then you will find probably). The 'hack' is NOT taken in charge, and even if change you successfully the necessary bits of code, it is not guaranteed that your GPU works or that it will work well.

  Yet once, only the GPU listed at the link above and stated as 'supported' by Adobe are guaranteed to give you the desired results of playback engine Mercury.

  About RAID 0 and video uncompressed... you use true uncompressed video? Many people do not, instead of use formats like DV, HDV, AVCHD, DVCProHD, ProRes, etc.. A RAID 0 is perhaps a good idea if you use 5 simultaneous streams of video from the same player, but it's really a whole topic altogether. If you use UNCOMPRESSED video, then your hard disk configuration and RAID are of main importance for smooth playback. CPU becomes less important, since there is nothing to "decompress." However, for DV, AVCHD formats and disc hard similar speed is relatively unimportant because the files are generally well below the speed of the flow of a standard disc (medium-sized AVCHD around 17 to 25 Mbps, which is nothing). However, with these more compressed formats such as AVCHD your CPU must be extremely tough because it does all the work of decompression of the video for playback on the fly.

  I hope this helps!