Folder images in Robohelp 7 project lists a small fraction of the images really there

Similar Questions

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• Project seems OK to iMove, using the part of the video is damaged.

  I created a project in iMovie. 10.1.1. everything looks and plays OK.

  It contains only clips and transitions, video camcorder and original sounds.

  It plays OK in iMovie.

  Using the shared file... translates into a corrupted mp4 file.

  I tried various resolutions, always the same result.

  Here is a screenshot of part of the video, which does not play, some static, some jerky movements.

  Thank you.

  

  Hello Tokyo,

  Thanks for the screen shot showing the corruption of the shared iMovie project. It is encouraging that the project plays well in iMovie, but we need to isolate what can happen here.

  Before you begin, it is always good to have up-to-date backups.

  OS X El Capitan: of alternatives for the backup of your Mac

  You have tested with different resolutions.  It also happens with different Compression and quality settings?

  If it works, it can get you an export but we should always isolate why these exports did not work.

  This happens with other projects?  If this isn't the case, then there is a problem with this project specifically.

  If you do not currently have another project to test with you can create a new little project for the test.

  iMovie (2013): create a new movie

  You can use the construction in camera to create new content, fees for the test.

  If the problem is with just the initial project, you can duplicate to troubleshoot a copy.  Duplicate project by clicking on it in the Finder and choose duplicate.

  That your project contains only clips and transitions, first to see if it is a question of transition by removing the (or half of them) and to share to see if it works now.  If it works, one of the deleted transitions is the question and you can begin to add to that their return to isolate.

  If it is not yet implemented with no transition, then it can be a problem of clip. As with transitions, take half and test.

  iMovie (2013): organize your events and projects

  Continue to isolate to refine the offending clip.  Then re - import fresh clip and test.

  Note to check 'the other half' if necessary, it may be easier to delete this test project and to reproduce the original again to continue his tests.

  If the problem occurs with all projects and then see if there is a problem with your user account settings by testing with another user account.

  How to test a question in another account on your Mac - Apple Support

  Test with a new project and see if it works with this new account.  If so, then there is a problem with your user account, and we need to clean up.

  1 open the ~/Library folder in your user account

  2. move anything in the files Caches and preferences that starts with com.apple.imovie on the desktop

  including the iMovie user specific files:

  iMove 2013:

  ~/Library/containers/com. Apple.iMovie.app

  ~/Library/caches/iMovie/

  3. search for and move plugins QuickTime of third party on the desktop:

  / Library/QuickTime /.

  Here's the Apple Codecs that do not need to be removed:

  /Library/QuickTime/AppleIntermediateCodec.component

  /Library/QuickTime/AppleMPEG2Codec.component

  4 restart the computer and test. If it works, you can remove the files from.  If no change, you can put the removed preferences by replacing the newly created files.

  If the problem occurs with the new user iMovie itself may need to be reinstalled.

  OS X Yosemite: install, update and uninstall applications

  This may seem long, but the goal is to isolate which raises the question so we can fix it.

  Please let us know how it goes.

• Uupdate plugin page has all the plug ins listed as unknown, and to the title of the ACTION, there '? Search "; Why has this changed?

  When I checked today to see if no plug-ins needed for the update, all plug-ins have been listed as unknown and in the Action column, there '? Search ". It's never happened before. Thanks for your help.

  I could be the page is out of service.

  Go to the web page. Once the page loads, mouse to the address bar
  and left click the icon. A window to display information of site should
  developed. Now select permissions. In the menu, find the plugins, and
  the value all Allow. This action will have an effect only as a single site.

  Then reload the page.
  https://www.Mozilla.org/en-us/pluginCheck/

• Topics in RoboHelp 8 projects are going through

  I have several projects I have improved imported in RoboHelp 8.  Initially, when in each project, all topics are correct.  But after importing projects from second and the next, when I return to the first project, it shows the subjects of the latest project?  What is going on?  I tried searching to see if this has happened to others, but don't see anything other... Any help would be appreciated...

  Hi all

  It might help if we take a moment to understand a bit of the evolution of RoboHelp.

  Pull your chairs a little closer and I'll tell you a story. In the first years of RoboHelp projects are managed by the. File of the metatarsophalangeal joint. Because the MPJ file kept track of all aspects of the project, it was possible to store as many projects as you want in the same main folder. It was nice of the appearance of sharing content. You can configure things so that you have common subjects and images in several projects. If one of them has changed, you changed them in any project and they changed for all projects using them. Of course, this meant you had to recompile or re - build each project if they have changed, but the change actually was held only once.

  Now comes the long X 5 with a new file structure. XML format. This means changes. Unfortunately, some of the changes that effectively blew this way of working completely out of the water. You may wonder why. Well, that's because while each project is often unique, some of the underlying files are rather generically named. For example, you have the ProjectName.XPJ, which is specific to each project, but that reference XPJ generic files with the extensions of file APJ (Anaheim project). Files such as rhskins.apj, rjsnippet.apj and so on.

  My guess as to what happened here is that with a single instance of these files can be in one folder, the one who saved the last wins.

  What you see before you is the next task.

  1. You need to split the project into separate folders to make each project in its own folder.
  2. THEN you upgrade each project.

  You should probably start by restoring the backup that you did before you attempt the upgrade.

  You, uh, did, haven't you?

  Well done to all... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Default printer in the folder images in Vista Ultimate

  I tried to understand why the PICTURES folder using my FAX printer by default when I always set my default system for the normal printer printer.  How can I see what the printer PHOTOS folders options are to choose a default printer?

  Hi daveshrader,

  Thank you for using answers Forum.

  If I read your post correctly, your printer is the default device and working properly.
  You just want to know why Fax is listed first when printing?

  Do you have a fax device connected to the computer?
  Do you use it with a fax? Do you use efax?
  If your printer is set as default, it should appear in the selection box.

  I suggest to perform a clean boot to see if some startup programs may conflict with the printer.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  You opened an empty catalog.

  You can try the following two steps to open the appropriate catalog file.

  1. Use the file-> open recent, open the list of all catalogs
  2. If this does not work, you will need to find the appropriate help for your operating system catalog file and double-click it to open it.

• Change the name of the folder 'Images' output before its publication?

  Hi, is it possible to change the name of the 'images' folder that contains all of the images involved in the project before I publish the project?

  As far as I can tell, if I change the name of the folder "images" of a project which has been published, it will not pull up one of the images in the future. (when I saw in a browser, etc.).

  If there was a way to change the name of this loan account, it would help and ensure our pull images from the correct folders.

  Thanks - Scott.

  http://forums.Adobe.com/message/5077476#5077476

• Cannot access my music on my Ipad or Iphone. Whenever I have select the music icon, there is a picture of a girl with his Iphone hide list of music, I can't getrid of this image. I don't want to try or buy music

  cannot access my music on my Ipad or Iphone. Whenever I have select the music icon, there is a picture of a girl with his Iphone hide list of music, I can't getrid of this image. I don't want to not try or don't buy music if I touch the image, nothing happens no connection to the music store. The image is there, and that's all. How to get back to my music.

  

  On one of the devices, try to reboot (to give a fresh start to iOS).  Data are not affected.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Then, go to settings-> musicand make that Show Apple music is turned OFF.  Tap the music app.  If you see this image with the girl holding the iPhone, there should be choices on the screen to Join Apple music or display your own music (don't remember the exact wording).  Choose the latter.

  no link to the music store

  The store for buying music is a separate application called iTunes Store.

• If I copy and paste an image file (jpeg, for example) in the folder of photos on my Mac, is it automatically imported in the Photos app?

  If I copy & paste an image file (jpeg, for example) that I downloaded from the internet to the folder of photos on my Mac, is it automatically imported in the Photos app? Note that the picture on my Mac folder is the folder that contains the file "Library.photoslibrary Photos".

  N ° you must actively import photos with the file-> import... command.

  Given that you can delete the file as soon as it is imported - if you have the copy in the library checked preferences - I use a folder called 'imports' on my desk to separate files that I'm importing. Once they are imported files into the import folder can trash.

• Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I see a file called "Library.photoslibrary Photos" i.e. 28.52 GB but I also have about 160 other image files in the same folder. But in pictures,.

  Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I have a file named "Library.photoslibrary Photos" i.e. 28.52 gb and another folder called 'iPhoto Library.migratedphotolibrary' i.e. 4.95 GB, but then I have also on the 160 other photo and video files in the same folder. But in my Photos app, it says that I have 6 260 'elements '.

  The pictures that you have imported into the photo library are, by default, stored inside the package (not file) "Library.photoslibrary Photos" in your pictures folder. The 'iPhoto Library.migratedphotolibrary' package would contain photos that have been stored in your library, iPhoto at the time of the migration.

  The other files in the pictures folder are that: other files. Also, they can be in libraries if you imported and has not deleted the copies lying around in the images.

• Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside

  Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside the Jquery page. In the future I would also be able to add, to remove the DB records. Any help, tutorial... Thanks TG

  I would like to connect with the database instead of "writing" all the tables in the bearings inside the Jquery page

  This is usually done with a CMS (content management system). There are commercial products CMS like WordPress, Joomla and perch. You create one or several layouts and then create pages of these page layouts using the CMS. In this way, it is possible to have hundreds of pages, each with unique content, but a page layout that can be managed in a place of sharing.

  CMSs on shelf don't require programming skills. Otherwise, some of us write our own CMS with custom functions, but this requires back-end, as with PHP programming.

• Imported images no longer go to the folder "Images" on my Mac.

  Since I started using Lightroom 5 (version 7) when I import pictures from my card or the camera, they no longer go to my folder 'Images' on the hard drive, but rather in "all my files.  I'm doing something wrong?  Thanks for any help.

  Is there a subfolder called Lightroom or a subfolder called images in the images folder? More than likely nothing. When you click on the input of images in the sidebar you will then need to open, click on this other folder subfolder.

  When you read the information which is the exact full path.

• RoboHelp 11 project does not save changes or close the project

  I work in a German version of my (very large) RoboHelp project, when all of a sudden, the project has stopped accepting any exit, close, or save commands. I will not say that it has stopped responding, because I could always make changes to the table of contents, import subject .htm, open/close the theme files and basically do everything EXCEPT opening and closing of the project manager directories, save or close or exit RoboHelp project.

  So, basically, I had to use the end task task manager and stop RoboHelp, which meant that I lost all changes to my project.

  When I tried to re - open my project, I got the error message ".cpd corrupted", then I deleted the .cpd and re-open the project. Sent back me to the original question - unable to get out, close, or save project. I tried to copy the .xpj and the .cpd of an earlier copy of this project, but not luck.

  How to break this terrible cycle?

  Thank you!

  I think I found the problem. The project settings were set for the appropriate language. I had copied the .cpf of the Spanish version of the project above to see if it would make a difference and the project went very well, but when I generated using, I noticed that the tabs in the frameset, such as contents, Index and search, were in Spanish.

  I checked the properties of the project German and discovered that the language of the project was set to Spanish, rather than German. Once I changed the language of basis for the whole project, I stopped to meet the problem.

• I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  Hi Dave,.

  The location is ~/Library/Application Support/Adobe/Common to be exact.

  Make sure that you type the TILDE (~) key.

  When in the Finder, click the go > go to folder... > Type ~/Library and navigate to Application Support/Adobe/Common

  Thank you

  Regalo