Follow-up diagnosis of Windows service

Similar Questions

• I get the following message: windows service install could not be accessed. Anyone know what I can do?

  I can't download anything to my cmptr more.  I get the following message: windows service install could not be accessed.  Anyone know what I can do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps below:

  Method 1:

  Check if the installer of windows services are running, follow the steps below:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 2:

  Re-record an installer of windows follow the steps below:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to download.

  Method 3:

  If the above step fails the utility auditor system files to run it and check the missing or corrupt files follow the steps outlined in the article below:

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download Windows Service Pack 2

  I have trouble downloading SP2. When I try to download it via windows update, the download starts then I get an error screen saying "The Installation was not successful." Below that was "Item could not be found."

  I tried to download the standalone windows Download Center service pack, but it still doesn't work.

  Can someone help me please? I'm doing something wrong? Someone at - it similar problems?

  Hi cbelle,

  Thank you for using answers Forum.

  I suggest using the CheckSUR for investigating issues of update.

  What is system update readiness tool? System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These contradictions may be caused by various hardware failures or can be caused by software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies.

  The following files are available for download from the Microsoft Download Center:

  

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.
  (http://www.microsoft.com/downloads/details.aspx?FamilyID=0435684b-8d12-4028-9cb0-b2903257f1fd)

  

  Download the update tool for Windows Vista x 64 (KB947821) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d)

  Copied from http://support.microsoft.com/kb/947821

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Servicing identified that package KB972036 (Update) is not applicable to this system

  How can I get rid of this update? I find only information for the installation of updates failed, nothing on the automatic reception of an update through Windows Update that is not valid for my system.

  Windows Vista Home Pemium Service Pack 2
  HP Pavilion DV6700
  Microsoft Office is NOT installed, only the viewers

  "Windows Servicing identified that package KB972036 (Update) is not applicable to this system"

  "Windows Servicing has not finished the process of change update 972036-11_neutral_LDR of State of Staged (Staged) packaging KB972036 (Update)"

  Log name: System
  Source: Microsoft-Windows-maintenance
  Date: 2009-09-02 10:52:50
  Event ID: 4375
  Task category: no
  Level: error
  Keywords: Classic
  User: T24622056-PC\Alan
  Computer: T24622056-PC
  Description:
  Windows Servicing failed to complete the process of the package configuration KB972036 (Update) in install Requested(Install Requested) State
  The event XML:
  
   
     
      4375
      0
      2
      0
      0
      0 x 80000000000000
     
      103100
     
     
      System
      T24622056-PC
     
   
   
     
        KB972036
        Update
        Install requested
        Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0
        Installed
        True
        0 x 80070643
        Fake
       
       
     
   
  

  Hi BrechbieIAD,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  Step 1:

  You may need to start the computer in safe mode and uninstall the update, follow these steps to start the computer in safe mode:

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  See the link: http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Step 2:

  Now, you may need to delete the contents of the download on your system folder, follow these steps:

  Click Start > type download in the start search > delete the folder KB972036.

  Step 3:

  Now, run Windows Update and allow to install KB972036.

  After Windows Update has finished reboot normally and everything should be fixed.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer out of memory. Error "Setup Windows service could not be accessed" when you try to delete all programs to clear a space.

  Original title: the windows service install could not be accessed

  "I have no memory on my xp ran computer and I am trying to delete all programs to clear a space but when I try to delete all files, it says is following" windows service install could not be accessed. This can occur if you are running in safe mode or if Windows Installer is not installed properly. Contact your support team. "Help, please

  http://support.Microsoft.com/kb/315353

  Follow the instructions in this link and also please provide more info, make and model of the pc, current antivirus, operating system and service pack.

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Cannot install updates Apple or HP. Error "Setup Windows service could not be accessed."

  I am running Windows XP and recently were not able to install updates apple or hp and get an error message saying that windows service install could not be accessed.

  error message when you try to install itunes or apple updates and updates from hp.  It is said: the window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.  Contact your support team.

  Hi Linda,.

  You can read the following article and see if it helps.

  Error message when you try to add or remove a program on a computer that is running Windows XP: "the Windows Installer service is not to be accessible.

• Error: "Windows service install isn't being accessible.

  Original title: Hello. I'm having a problem with windows install.

  When I try to install a software, I get the message that "windows service install could not be accessed. This can occur if you are running Windows in safe mode or if windows install is not properly installed. Contact your assistance support team '. " I'm not in safe mode. Help, please. How can I fix Windows install? I have Windows XP Home Edition Version 2002. I have SP2.

  Hi Steve000000,
   
  Follow the suggestion given in the article for this problem:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

• Cannot open documents of microsft because the Windows service install could not be accessed

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

  Try to download and install Windows install
   
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  The version you need for XP is the bottom of those listed.

  wrote in message News: * e-mail address is removed from the privacy *...

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

• FAILED TO CONNECT TO THE WINDOWS SERVICE (GROUP POLICY CUSTOMER SERVICE)

  Hi I have the same problem is started when I was looking for a driver for a usb camara the problem may be caused by a bad driver who does not belong...

  I am currently running my laptop on safe mode, so I can solve the problem. I use system restore and tried to solve some problems in the registry but still keep getting the pop up C:Windows\system32\Config\systemprofile\Desktop is not accessible
  I do not know completely what is the problem.
  I also have another pop up on the side saying "FAILED to CONNECT TO WINDOWS SERVICE (SERVICE to CUSTOMER GROUP POLICY)...".
  HELP PLZ

  Hi Jesse310,

   

  Welcome to Microsoft Answers Forums.

  • When you get this error message?
  • You are able to boot to the desktop?
  • What is the version of Windows installed on the computer?

  This can happen more often if the user account is corrupted or some missing files.

  First of all, I would say that run you a virus scan online on the computer to scan and remove infections of viruses or malware on the computer and check if it works.

  See the link below for the on-line virus scan and perform a full scan of service on the computer.

  http://OneCare.live.com/site/en-us/default.htm

  If you are unable to boot to the desktop in normal mode, I would say that you start the computer in safe mode with network and try the online scan.

  Steps to start in safe mode with networking

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

   

  Start your computer in safe mode

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If the step above does not resolve the question suggests that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Call from Windows Service Center on errors in Event Viewer

  I received a call from a person named Jeff Ipkiss saying he was from the Windows Service. He said that he called because I was a loyal customer of windows and he wanted to fix my pc of some errors as it gets when I download files. I asked how he knew, he said his company gets alerts when clients receive error messages. He asked me to go in the Viewer (eventvwr.exe) events I watched administrative events and Windows logs and saw many warnings and errors. He also had me go into the filter to search by errors, and I could see several errors. After he checked, I had several errors, he tried to connect to my PC to correct the errors. (He assured me that it would be a tax)! I asked why he did and again he said "because you are such a loyal customer of windows. He also said that if there was any critical errors, there may be a small fee. At this point that I have no comfortable giving him access to my system, that's why I asked for an email check his business and his company's identity. I received the email from * address email is removed from the privacy * , I just did not trust so I hung up. What is a reputable company?

  From: tech windows * address email is removed from the privacy *

  Date: 13 February 2013, 16:32:45 EST

  Topic: WINDOWS TECH

  Madam, Sir, this e-mail is sent to you to confirm the real you talk to Jeff Ipkiss certified technician working for the computer windows and his employee Id: 0786JF. So if you need any information about this agent or company you can log on: www.techepc.com or you can call our help line number: 1-201-285-2011.

  Thanking you

  Windows Tech

  It's a scam

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-fell-for-the-eventvwr-phone-scam/8e79cd60-0a09-4ED6-85b0-056230878815?page=1

  https://krebsonsecurity.com/2012/08/tech-support-phone-scams-surge/

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.