Font file not seen by the domain user

Similar Questions

• package not seen under the sys user!

  Hello;
  I discovered under the sys user packages;
  but not our package seen under sys; I create with the sys user
  any idea
  regrads
  siyavus

  This is not a package, it is a procedure. Go and check the procedures instead of packages.

  The user who you are trying to check, SYS again?

  Ogan

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Give permission to the domain users to replace the file in the folder created by domain admin

  We have a domain controller in our network. also we have the domain users and domain administrator. We create a batch file that copies a file to the folder by using a script to the server policy when users open a session input/output. However if the admin area access system cant use overwrite file in the folder. We want to give permission to the domain users to replace the file in the folder created by the domain administrator.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Hope the information is useful.

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• WMIC command fails for the domain user

  Hi all

  I use windows 7 and testing commands wmic as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  Most of the time control fails with RPC server unavailable to users in the domain (default of 75%). Working sometimes and mostly failing to time.

  Error code

  0x800706BA-online the RPC server is unavailable.

  If I use the local user, she is successful, command below still works (100% success)

  WMIC/node: "Computer1" / User: 'Nom_ordinateur\Nom_utilisateur' / Password: 'password' PROCESS CALL Create "calc.exe"

  I have two computers running windows 7, the firewall is disabled

  Executing command from computer2 as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  1 computer settings

  1. Adds the domain under group administrator user
  2. Configure dcom through DCOMCNFG.exe and got all rights to domain user

  (DCOM remote launch and activation permissions for a user, the remote DCOM access permissions)

  1. Rights granted to wmi namespace (root, cimv2) of domain user using wmimgmt.msc (all rights to the namespace namespace and sub)
  2. Firewall settins according to the - http://msdn.microsoft.com/en-us/library/aa822854%28v=vs.85%29.aspx

  Note: The firewall is disabled

  1. UAC disabled
  2. Check rpcss and associated to the computer and all services are running

  What could be the reason of failure for the domain user (work awhile and is Server Unavailable RPC over time). Tried to restart that wmic user system and field control did not exist, after awhile like 30-45 minutes user field the wmic commands work and default again. How to solve this problem (such as checking the logs)?

  Thank you

  Mani

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winserverDS

  It will be useful.

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Could not connect to the local user accounts

  We have the following configuration:

  1. the virtual machine.

  Windows Server 2008 R2.

  b. active Directory

  2 physical machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  3. the virtual machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  Machine #2, we have connected successfully with VMware View and on machine #3 we have the following error:

  2012-11-13 17:28:10, 164 DEBUG < MessageFrameWorkDispatch > [ws_winauth] any logged-on user as a local user (domain = XREN1)
  2012-11-13 17:28:10, 165 DEBUG < TP-Processor3 > [VDIContext] ADAM connection failed: com.vmware.vdi.common.winauth.WinAuthCodifiedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 166 DEBUG < TP-Processor3 > [VDIContext] failed connection create ADAM: com.vmware.vdi.adamwrapper.exceptions.ADAMConnectionFailedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 167 INFO < TP-Processor3 > [LoginBean] user all failed to authenticate to view administrator
  2012-11-13 17:28:10, 167 DEBUG < TP-Processor3 > [ViewFlexFactory] com.vmware.vdi.admin.ui.LoginBean.login ms 13

  did you install the second server conection as a Local Administrator?

  a second connection to the Member Server in the domain before you install the software?

  be as a member of the domain using an account with local administrator privileges to be sure area.

• Custom web fonts do not appear in the published content

  Hello

  I use web fonts custom model Edge animate successfully, but when I publish the dashboard content animate, referenced (in the .css file) fonts do not appear in the published folders.

  Content of the CSS file:

  {@font-face}

  font family: "icon-police."

  SRC:URL("fonts/icon-font.EOT");

  SRC:URL("fonts/icon-font.EOT?#IEFix") format("embedded-opentype"),

  URL("Fonts/Icon-font.WOFF") format ("woff"),

  URL("Fonts/Icon-font.ttf") format ("truetype"),

  URL("Fonts/Icon-font.svg#Icon-font") ("svg") format.

  }

  I tried editing for "Web", "Animate the Deployment Package" and "iBooks / OSX" all this without a bit of luck.

  Y does it have that no way embed the font when publishing?

  Thank you in advance,

  CG.

  I could see the number of folder 'fonts' not getting copied for publish destination. It looks like a bug.

  Please report to us.

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• When I create the domain user, I used option user must change when you first connect, but am unble to get this

  When I create the domain user, I used option user must change at the first logon, but am unble to get it.

  Hi RadhamAravind,

  Thanks for posting in the Microsoft Community.

  As you create a domain user, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

• Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

  Next 'Units of the rule' in the layout, select the good 'units of the rule' in the drop down, and then set your margins.