Fonts and other color questions

Similar Questions

• Can you have bookmarks in a document of fm and other beginner questions?

  Hello

  I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

  Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

  a few questions about things I would like to be able to do:

  Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

  navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

  is for me as the author...

  I got just the Autonumbering once again kick, but have not found out/understood how to keep my legends of the figures

  with the images that I imported a framework anchored, if any help you can give me would be appreciated

  with that.

  Output PDF is great and the speed of the savings is ideal even for large documents. Is there a real advantage

  have a lot of several chapters in a book, rather than a long document? My longer document is of approximately

  280 pages and consists of four sections, with Appendix, glossary, index and table of contents.

  Output HTML seems to be as bad a I remembered 6 years when I used Webworks Publisher to

  perform the conversion. RoboHelp is a good alternative I organized an assessment from next week

  so have not had the chance to look at this yet, but would be interested in what people think.

  Thank you very much in advance for your help.

  See you soon,.

  Karen

  AKACB wrote:

  Hello

  I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

  Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

  a few questions about things I would like to be able to do:

  Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

  navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

  is for me as the author...

  Hi, Karen:

  In FrameMaker documents, you can navigate to something that will become a link in a PDF document to its source, with a "hyperclick" on the page entries table of contents and indexes in the generated files and references or hyperlinks not generated documents. A hyperclick is Ctrl + Alt + click. There is no click back. You can lock the FrameMaker documents to make these active links with a single click and use the dos commands and others on the Navigation menu that appears when a locked document is active.

  To lock or unlock a document for the type of hypertext navigation and release these keys in order: F Escape (must be uppercase) l (lowercase ' el' not important 'eye' or number one) k (must be lowercase). I remember as "(F) Island (l) oc (k).»

  Google search for words like 'Lock of FrameMaker for hypertext Documents' and "FrameMaker navigation Menu" without the quotes, for more information on these techniques.

  Also, you can use the dialog box insert reference allows to browse some sort of plan file, by selecting a paragraph format such as a cap, on the left and scroll through these paragraphs on the right. Page numbers, you can see the list below indicate the first and last page of the paragraphs in the list above. It's a little inaccurate, but useful.

  You can also generate table of contents or index or list of external cross-references (special > list of > references > external cross references), and then close window of the file generated to fit in the workspace to the sides of the active document. Hyperclick in the generated files, or lock files and a simple click on an entry, to navigate to the location linked in any other file is advanced to.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Why some Emoji to pass and others are question marks.

  Sone emoji are receive OK, others are points of question marks (?), why & how to fix it.

  The receiver does not have the same installed emoji. Update to the last level of iOS.

• Data Guard - allocation of licenses and other fundamental questions before setting it up.

  Hi all

  Please allow me to submit some questions about Oracle Data Guard.

  There are 2 databases 'authorized and ready ':

  -a single instance of the "alfa", Oracle Enterprise Edition 10.2 database,

  -"bravo", Oracle 10.2 Enterprise Edition, Real Application Clusters database

  I have to "align" congratulations to alfa on a daily basis, so that--in case of failure of the main 'alfa' site - recovery is possible change to the site "bravo."

  (1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.

  Am I wrong?

  (2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?

  (3) only the Data Guard configuration require

  (a) additional licenses?

  (b) additional material/software resources for host machines?

  (5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?

  Thank you very much in advance!

  Marco mazzocchi

  Hello

  (1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.

  Am I wrong?

  You have reason, physical hosting it good thing. For the most part, you will get impact with until or unless data loss because of some problems of network (or a configuration problem)

  (2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?

  Logical standby is a little different from the physical standby mode

  (3) only the Data Guard configuration require

  (a) additional licenses?

  (b) additional material/software resources for host machines?

  Data features come with Enterprise Edition - perhaps for the active database "cost of the additional license.

  https://docs.Oracle.com/CD/E11882_01/license.112/e47877/editions.htm#DBLIC109

  (5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?

  Good level to maintain the same level of oracle binaries / patches and still the support of heterogeneous DG

  -Pavan Kumar N

• Work records and other installation questions

  Hello, I am a user of long date first but have never been involved in the installation program. I decided to start making a personal video editing on my gaming computer and met with a few questions.

  The biggest one I have is with the work disk configuration. I read the help doc about 10 times and google all combinations of words I can think, but I'm still not sure how should I configure these for my setup.

  I have the first Pro CS5 installed on my C:, which is a 128 GB SSD

  For storage, I have 4 1 than to disks in Raid 5, yes 2.72 TB of total storage.

  How I want to configure my "scratch disks" for the best possible performance?

  Question 2: It could be linked to the work disk configuration, I'm not sure, but something that I've always wondered. What disk does save my projects to in this configuration? Is how important it? Then, I want to make my final video in this same folder or on another drive?

  Question 3: I a currently GTX 460 graphics card and enjoy benefits of CUDA acceleration. I have looked at adding a second in SLI for games purposes, but have read that the Mercury playback engine is not compatible with SLI. Does this mean that it will still work with a single card and I see no advantage in the first, or all CUDA acceration will cease?

  Thanks guys, I appreciate the help.

  First of all, SLI is not supported by PrPro, so it will do you no good and may well get in the way.

  You have only two HARD drives, SSD and RAID, so you don't have much choice there.

  Given the configuration of your I/O, I wouldn't worry about the ultimate in performance and just locate your assets, your projects and your Scratch disks on the RAID.

  In a more perfect world, I would say to separate the assets of the project, but it would mean another HARD drive (actually a good supplement, as a configuration 3 x is better than a configuration of 2 x).

  In a more perfect world, you would separate your assets to a HARD drive, your projects to another, your discs scratch to another and exports to another one.

  The foregoing has one drawback - household later. I create a new folder for all projects and locate my disks scratch that. This allows the elimination of this project, and it takes all the files from Scratch with her drive. However, for optimal performance, separating might get you a few points on the PrPro Benchmark scores, but doubt that you never notice it, more you still have work to do, when you delete a finished project. Your call.

  Good luck

  Hunt

• Video turns green and other colors

  Always looking for help with this issue please. At random, video calls download like that.
  So far no solution and I write again for more help.
  
  

  Try to update driver Intel HD graphics card.

  http://www.Dell.com/support/home/us/en/19/product-support/product/Inspiron-15-3542-laptop/drivers/ad...

  Be sure to select the option Windows 10. You can also use the direct link to this driver:

  http://downloads.Dell.com/FOLDER03316531M/1/Video_Driver_3PGYF_WN32_10.18.15.4274_A01.exe

  This updated driver from Dell is address the issue explicitly green screen video

  Patches

  -Fixed the problem of video green screen

  -Fixed premium content playback problem with 15.40 PV drivers problem

• How to change default documents to read reviews and other open questions

  95% of the time, players just want to read a PDF file. Therefore, it is very annoying when every document opens with the toolbar that is taking place on the right-hand side.

  However, I can't find an option to make the drive to start playback. Is it possible to do?

  Another problem of boring startup is the default to not trust a document. I uncheck the box whenever I open a pdf file. How can I change the default?

  In addition, the recent updated which I spent in DC has done much less readable than the old player documents. How to switch back? I'm on 2015.007.20033

  Hello

  There is not a way to change the default display in playback mode. However, you can set the default mode for each PDF to hide the toolbars. You may also be interested in the full screen view, you can define here as well. Acrobat Help. Display of PDF files and preferences.

  

  To return to Acrobat XI, read this: Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI.

  To change your trust settings, go to Acrobat Pro > preference > Trust Manager.

  

• How I change the fonts and colors of default return?

  I changed the font and the color of the text through the Tools button and the button options and the tab content. I can't find anything tell me how to change the fonts and colors to the colors and fonts by default. Can you advise me? I use Windows 7 Home Premium OS. Thank you.

  Hi Brenda19605,

  You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a & s = do & r = 0 & s = as

  The default settings for the police are in this article:
  https://support.Mozilla.org/en-us/KB/some%20text%20shows%20up%20bold%20after%20upgrade

  Unfortunately for the default color has no good reference. For the text, but it is black (most lower-left), the background is white (color above left). Unvisited links is blue (column 8, line 5) and the visited link is purple (column 9, line 5).

  Let me know if you need help more!

  Lordfreak

• How to create a signature to emails customized with the fonts and colors that I select instead of the default values?

  create a snazzy to my e-mail signature

  Hi, I want to create a signature in my windows mail email... He will be only with the police, which is the standard... How do I create a jazzy, as have the font and the color I want? Thank you

  Note: The HTML Signatures must be less than 4 KB.

  Open a new Message window and create your signature. (Insert the graphic & text). Click on the Source tab (view |) Source Edit if not already checked). Highlight the complete source code and copy / paste into Notepad. File | Save under and in the file name field, save as htm, (i.e. Sig1.htm). It will be saved in My Documents by default. Go to tools | Options | Signatures. Click: File | Browse and insert your saved signature | Apply. You can now rename it if you wish.

  Of course, if the recipient reads in plain text, they don't see the it.

• Why are some of my file names have black fonts and some in the same folder have blue fonts?

  In the same folder, some of my file names appear suddenly in blue font and others in black letters. What is the meaning of the different colored fonts?

  Open Windows Explorer.  Click Tools > folders and select the view tab.  Scroll down to "Display encrypted or compressed NTFS files in color" selected?  Change the display of the Explorer WIndows if you change this option?  Generally, the encrypted files are shown in green and compressed files (i.e. zip files) are indicated in blue, while the normal files are represented in black.  They can also be colored differently if they are on a different partition or files have been created while the computer is connected to a different domain.

• Stupid question: why tinytots (and other similar fonts) will not work in Firefox?

  I am a user of Tumblr, if of course if I had to work on a theme, I would like to see the fonts that I have chosen to serve. In Chrome, everything seems as it should usually (relative to the fonts). In Firefox, I respond specifically to these two browsers so my theme seems not completely horrible. In my opinion, only a browsing experience more could be made if Firefox showed fonts such as tinytots for more than just me, but for someone else who is perhaps not brave enough to post about it. This brings me to another question: I'm just ranting or is it possible I can see these fonts and not know about it?

  This isn't a stupid question.

  Google Chrome has its own library of fonts.
  
  Mozilla Firefox runs Windows fonts library.

  To run on Firefox fonts, they must be installed on Windows and then Firefox must be restarted.

  Sometimes, Web sites do not use the correct font name and the police is found, even if it is installed.
  
  A good website designer would design a Web site with backup for users to load fonts if they do not have the installed font.

• Change the sizes of fonts and colors without CSS [was: such a n00b]

  I can't believe I have to ask this question, but I want to change the font sizes, styles of fonts and colors in fashion Design CS5 (recently updated), but using HTML tags, not CSS.  If I use the properties panel in HTML only appear bold and italic, options where are other options gone?

  I found alignment on the Format menu, but every time I use this menu to change the font style that seems to get forced to CSS, and for the life of me, I can't find how to change the font size without having to edit the HTML code in code view, which I don't.

  Can such a n00b, anyone help please?

  [Subject line edited for clarity by Moderator]

  It is not uncommon, and talking about who I think that more people should use the Adobe - feature request/Bug Report Form and request a feature to turn on an entire document inline styles, because it is common to do for HTML emails like Great Outlook thing and is more picky and problematic email client It is a bit like IE, although IE is trying to move forward.

  In the Properties window, click then target CSS rule and choose the inline Style.  Then, Dreamweaver will apply an inline style for the element.  It will always write the CSS code, which is the right way, but it will write it inline, which is the case when you can not link to external CSS files.

• Need to reset the font and color of text background

  I need to reset the font and color of background. When I open a program it shows that it is set to now and I can't read anything. I tried to go to text reset original settings, and it doesn't fix it. What should I do?

  Right-click on the desktop and click Customize (if you can see) otherwise right click and press up arrow once and press to enter. Select one of the themes of your mouse prelisted. Once you select your theme all change and fonts and the background color of back to normal. But you must reselect your wallpaper and screen saver. It will be useful.

  Good luck!

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Customize my mail i.e. the fonts and color?

  I would like to know how to customize my mail on my iMac i.e. color and font size.  Help, please

  Hello..

  Launch the E-mail application then go to the Mail menu bar and click on help > Mail help and then type "police" in the search field upper right of the Help window, and then results: Preferences for fonts and colors in the mail.

  You must see this...

  Set of fonts and sizes of fonts and display messages in Mail and to distinguish City text when you reply to or transfer of messages.

  To display these preferences in Mail, choose Mail > Preferences, and then click fonts and colors.

  Mail open for me

  Message list fonts	The police and the size of the font to display the list of messages in typical Configuration only (the list of messages being especially messages). Click Select to use a different font.
  Message fonts	The police and the size of the font to write and display messages. Click Select to use a different font. If the sender used a font specific for a message, this font is used when you view the message.
  Police in width fixed	The police and the size of the font and display messages in plain text. Click Select to use a different font. You must select the option use the fonts fixed-width for messages in plain text for the police to apply.
  Use fonts to fixed width for plain text messages	Fixed-width fonts display all characters with the same width. This font is useful when you try to align the text with spaces instead of tabs.
  Color of text in quotes	Display the text in quotation marks in colours. Click on the context menu of the color to a level using a different color. Quoted text is part of an included message when you replying or forwarding the message. It is usually indented.

  If your recipients don't have the same fonts that you used in your message, similar fonts are substituted.

• Cannot access the internet. Have a bunch of yellow exclamation and question marks on Net work adapters and other drivers__

  Cannot set up internet access. Have yellow question mark points of network adapters and other devices (other drivers)

  Hello

  Maybe this can help, http://www.ezlan.net/faq.html#ghost

  Jack-MVP Windows Networking. WWW.EZLAN.NET