Data Guard - allocation of licenses and other fundamental questions before setting it up.

Similar Questions

• Can you have bookmarks in a document of fm and other beginner questions?

  Hello

  I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

  Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

  a few questions about things I would like to be able to do:

  Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

  navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

  is for me as the author...

  I got just the Autonumbering once again kick, but have not found out/understood how to keep my legends of the figures

  with the images that I imported a framework anchored, if any help you can give me would be appreciated

  with that.

  Output PDF is great and the speed of the savings is ideal even for large documents. Is there a real advantage

  have a lot of several chapters in a book, rather than a long document? My longer document is of approximately

  280 pages and consists of four sections, with Appendix, glossary, index and table of contents.

  Output HTML seems to be as bad a I remembered 6 years when I used Webworks Publisher to

  perform the conversion. RoboHelp is a good alternative I organized an assessment from next week

  so have not had the chance to look at this yet, but would be interested in what people think.

  Thank you very much in advance for your help.

  See you soon,.

  Karen

  AKACB wrote:

  Hello

  I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

  Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

  a few questions about things I would like to be able to do:

  Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

  navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

  is for me as the author...

  Hi, Karen:

  In FrameMaker documents, you can navigate to something that will become a link in a PDF document to its source, with a "hyperclick" on the page entries table of contents and indexes in the generated files and references or hyperlinks not generated documents. A hyperclick is Ctrl + Alt + click. There is no click back. You can lock the FrameMaker documents to make these active links with a single click and use the dos commands and others on the Navigation menu that appears when a locked document is active.

  To lock or unlock a document for the type of hypertext navigation and release these keys in order: F Escape (must be uppercase) l (lowercase ' el' not important 'eye' or number one) k (must be lowercase). I remember as "(F) Island (l) oc (k).»

  Google search for words like 'Lock of FrameMaker for hypertext Documents' and "FrameMaker navigation Menu" without the quotes, for more information on these techniques.

  Also, you can use the dialog box insert reference allows to browse some sort of plan file, by selecting a paragraph format such as a cap, on the left and scroll through these paragraphs on the right. Page numbers, you can see the list below indicate the first and last page of the paragraphs in the list above. It's a little inaccurate, but useful.

  You can also generate table of contents or index or list of external cross-references (special > list of > references > external cross references), and then close window of the file generated to fit in the workspace to the sides of the active document. Hyperclick in the generated files, or lock files and a simple click on an entry, to navigate to the location linked in any other file is advanced to.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Licenses and other cost issues.

  I am a layman in the thing of the license, we are a publishing company by looking at our digital editing equipment and want to create a custom player.

  Adobe DPS is clearly the best way to go for this, because our content is all created in Adobe inDesign.

  I want to know is what is the extra cost total needed to be able to have our own player which publishes on the desktop and andriod ipad?

  There is annual fresh license? Are there fees for our material costs?

  Thanks in advance.

  In General, you pay a monthly or annual fee for the DPS software, and a fee per download for each problem downloaded by your readers. See ions.html https://helpx.adobe.com/digital-publishing-suite/help/digital-publishing-suite-pricing-opt.

  Neil

• Work records and other installation questions

  Hello, I am a user of long date first but have never been involved in the installation program. I decided to start making a personal video editing on my gaming computer and met with a few questions.

  The biggest one I have is with the work disk configuration. I read the help doc about 10 times and google all combinations of words I can think, but I'm still not sure how should I configure these for my setup.

  I have the first Pro CS5 installed on my C:, which is a 128 GB SSD

  For storage, I have 4 1 than to disks in Raid 5, yes 2.72 TB of total storage.

  How I want to configure my "scratch disks" for the best possible performance?

  Question 2: It could be linked to the work disk configuration, I'm not sure, but something that I've always wondered. What disk does save my projects to in this configuration? Is how important it? Then, I want to make my final video in this same folder or on another drive?

  Question 3: I a currently GTX 460 graphics card and enjoy benefits of CUDA acceleration. I have looked at adding a second in SLI for games purposes, but have read that the Mercury playback engine is not compatible with SLI. Does this mean that it will still work with a single card and I see no advantage in the first, or all CUDA acceration will cease?

  Thanks guys, I appreciate the help.

  First of all, SLI is not supported by PrPro, so it will do you no good and may well get in the way.

  You have only two HARD drives, SSD and RAID, so you don't have much choice there.

  Given the configuration of your I/O, I wouldn't worry about the ultimate in performance and just locate your assets, your projects and your Scratch disks on the RAID.

  In a more perfect world, I would say to separate the assets of the project, but it would mean another HARD drive (actually a good supplement, as a configuration 3 x is better than a configuration of 2 x).

  In a more perfect world, you would separate your assets to a HARD drive, your projects to another, your discs scratch to another and exports to another one.

  The foregoing has one drawback - household later. I create a new folder for all projects and locate my disks scratch that. This allows the elimination of this project, and it takes all the files from Scratch with her drive. However, for optimal performance, separating might get you a few points on the PrPro Benchmark scores, but doubt that you never notice it, more you still have work to do, when you delete a finished project. Your call.

  Good luck

  Hunt

• Why some Emoji to pass and others are question marks.

  Sone emoji are receive OK, others are points of question marks (?), why & how to fix it.

  The receiver does not have the same installed emoji. Update to the last level of iOS.

• How to change default documents to read reviews and other open questions

  95% of the time, players just want to read a PDF file. Therefore, it is very annoying when every document opens with the toolbar that is taking place on the right-hand side.

  However, I can't find an option to make the drive to start playback. Is it possible to do?

  Another problem of boring startup is the default to not trust a document. I uncheck the box whenever I open a pdf file. How can I change the default?

  In addition, the recent updated which I spent in DC has done much less readable than the old player documents. How to switch back? I'm on 2015.007.20033

  Hello

  There is not a way to change the default display in playback mode. However, you can set the default mode for each PDF to hide the toolbars. You may also be interested in the full screen view, you can define here as well. Acrobat Help. Display of PDF files and preferences.

  

  To return to Acrobat XI, read this: Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI.

  To change your trust settings, go to Acrobat Pro > preference > Trust Manager.

  

• Fonts and other color questions

  Hello

  This is driving me crazy. No matter if I click on the T in the layers panel, highlight the text etc. little matter what color I select my default text is gray.

  If I create a simple recatange and try to change the color of this to say red them again once it turns gray

  Would appreciate a response telling me I'm stupid

  see you soon

  Ian

  you are probably in grayscale mode, go to Image-> Mode-> RGB color

• Removal of Documents and data and other

  Material: iPhone 5

  Software: iOS 9.2 (at day, on this day)

  I have an old iPhone 5 that I'm redirecting as music player. I did a thorough cleaning ("erase all content and settings') of the device before you start. I copied the music on it (via iTunes on my MacBook). After a few moments, I noticed that the use of "Documents & data" is now about 900MB, and 'Other' is about 350 MB. What is this, and how do I empty?

  There are no installed applications (other than those which are by default on the phone). He has been in flight since the reset mode (but with WiFi and Bluetooth on), and it is an inactive SIM (got a new with my new phone, so this SIM has been disabled by my company). The only active account on my Apple account. No email, social media, etc. accounts are configured. There is no photos, videos, podcasts, or anything else on it. The use of the storage (under 'manage storage') shows some nominal storage by default applications (from 16 KB to 2 MB) and there is nothing further stated within each application.

  Then... What is only 1.25 GB of things which are appeared unexpectedly? And more importantly, how can I get rid of him? Other than music files (and the music app), there is no other applications or data on the iPhone that needs to be saved.

  Thank you.

  'Other' data the iOS itself, as well as any app data, messages or email.  350 MB is low, so it's mainly the iOS.  The Documents and the data is most likely the work of art album data, and associated playlists etc.

• 100% ram used on Data-Guard

  Hello
  
  We test our application with Oracle data guard.
  Is version of Oracle 11 g R2 (11.2.0.2)
  The configuration of data-guard is a primary and a physical standby server.
  Both servers have 16 GB of RAM. It is set on an ESX Server as two virtual machines.
  Each vm has two processors with a speed 2127,902 MHz
  OS is Red Hat Enterprise Linux Server version 5.5 (Tikanga)
  It's an arch bit x86_64 machine.
  
  The problem we see is that the consumption of RAM is almost 100%. (97%)
  Earlier, the RAM has 4 GB, believed is not enough and went to 16 GB after we found that same 8 GB is not enough.
  Even after setting the RAM 16 GB, entire memory was used.
  The demand for good results, the answers are quick enough.
  On average, there are 12000 inserts per minute in the database.
  
  The CPU usage is about 25%.
  
  
  We are looking to reduce the consumption of memory less than 80% so that if other applications must be run on the Data-Guard allows him to run or use nearly 100% of memory during the peak or abnormal conditions.
  
  It is a facility dedicated with instance what a single database that is running on the firewall data.
  
  Here is the use of memory (in MB)
  < -.
  [root@vm-lnx-rds1174 logs] free no. m
  total used free shared buffers cached
  MEM: 16051 15650 401 0 267 13532
  -/ + buffers/cache: 1850 14201
  Swap: 8095 0 8095
  ->
  
  Here is the related configuration memory set to the oracle instance.
  < -.
  change the system shared_pool_size set = 0 scope = spfile;
  change the system db_cache_size set = 0 scope = spfile;
  change the system java_pool_size set = 0 scope = spfile;
  ALTER system set LARGE_POOL_SIZE is 0 scope = spfile;.
  change the system sga_max_size set = 0 scope = spfile;
  ALTER system set sga_target is 0 scope = spfile;.
  ALTER system set pga_aggregate_target is 0 scope = spfile;.
  ALTER system set MEMORY_TARGET = 8G scope = spfile;
  ALTER system set MEMORY_MAX_TARGET = 8G scope = spfile;
  ->
  
  Details of the Configuration of Data-Guard:
  < -.
  DGMGRL > see Configuring
  
  Configuration - DGConfig1
  
  Protection mode: MaxPerformance
  Databases:
  PNETs - primary
  PNET - Physical standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  ->
  
  
  Please advice how we can reduce the memory consumption on the machine.
  
  Thank you
  Krishna

  Hello

  on Linux, high mem use is normal. Linux uses all the memory cache of the drive. You can compile this program to prove.

  #include 
  #include 
  #include 
  #include 
  
  int main(int ac, char **av)
  {
          long int n,m,i;
          long delay;
          char *buf;
  
          if(ac < 3) {
                  printf("Usage: %s  \n",av[0]);
                  exit(1);
          }
          sscanf(av[1],"%d",&n);
          sscanf(av[2],"%d",&delay);
          m=n*1024*1024;
          buf=malloc(n*1024*1024);
          // for(i=0;i
  

  and run it as follows:
  . 4000 10 a.out

  It will affect 4000 MB of ram 10 seconds. You'll see that once it's over, you have 4 000 MB of free ram. After awhile, this amount will be lower that linux will do IO operations.

  Paul

• Data Guard Vs Golden Gate

  Hello
  
  I have custody-transfer data disaster and now my planning to do more to implement the Golden Gate. My question is when you can protect your data and active pressure on the primary database using the Data Guard why someone should go to golden gate?
  
  Please let us know of your experience of Golden Gate on Data guard!
  
  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  I have data-guard for disaster recovery and now my management planning to do more like implement Golden gate. My question is when you can protect your data and offload pressure on primary database by maintaining active data-guard why someone need to go for golden gate?? 
  
  Please share your experience for using Golden Gate over Data guard!!
  

  Refer to this http://www.oracle.com/technetwork/database/features/availability/dataguardgoldengate-096557.html
  Can be useful

  One more thing, what is meant when someone using eve of terms and dataguard, dataguard active? Are not all the same?

  Active Dataguard is a device in which the database pending would be placed in open read-only mode and recovery (MRP/application log) would be ongoing. This is called as active dataguard and the wait would be in sync with the primary. The standby database when kept in open read-only mode can be used for purposes execute select queries. So, you would be having a function of the use of the database as a database, and at the same time the day before would apply the primary newspapers. This feature is available only from 11 g.

  In 10g or earlier versions, we had no such device. The database of rescue, if necessary use for reporting purposes, then the backup database must be open in read-only mode, but the recovery (MRP/application log) cannot be done. So, if you want that database waiting to have the application of fact log, then he must place in EDITING mode. If it will be used for the purposes of tax, then it must be placed in open READ ONLY mode and stop the recovery. Guests receive only 1 device at a time here.

• Type of protection for Acrive Data Guard

  Hi all
  
  I'm looking to implement a solution of active data guard 11 G R2 and must be live reporting of the database physical sleep.
  
  I need to confirm the mode of protection I need. (I think it's maximum Protection).
  
  Thank you very much
  
  VICC

  NOT CORRECT (see below in the thread)
  11 g, you can use real-time Query (DataGuard Active) with a MAXIMUM PERFORMANCE and a MAXIMUM AVAILABILITY

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

  Published by: Uwe Hesse on 27.01.2011 12:55

• recipient audit and other content in DropBox

  1. Original title: recipient audit and other content
  2. Having set up a folder DropBox with unique addressees can you then check and know who is in the list of recipients. ??
  3. Is it possible to have sent a file to, and then to add to the list of recipients and if so, how?
  4. If an ammends or adds files in folders are recipients notified and how?

  Hello

  For more information on the issues, I suggest you to contact Dropbox support team.

  You can check the link:

  https://www.dropbox.com/help

  https://www.dropbox.com/support

  Hope the information is useful.

• Request to license Oracle Data Guard

  Nice day! at all. I don't know if this is already asked before, but I would like to ask for your help regarding my inquiry.
  
  We have an Oracle 10 g Database EE here in our company which is established in a RAC (2 nodes and 1 SAN). Of course, that are already approved.
  
  We intend to implement the Oracle Data Guard.
  
  Of course the Oracle Data Guard will run voluntarily for a disaster recovery, in the case that our CARS (especially the SAN) will crash, we would like to have a stand physically separated by our primary database server (stand by server is completely separate to our existing main server) server.
  
  My questions are:
  
  1. don't we have to take advantage of a new license for custody of data?
  2. what other license should we acquire for the above settings?
  3. we would have a separate Installation of Oracle database on the standby server?
  4. If we have a named user license 150 on the primary database should purchase us a new license user named 150 for the confirmation Server?
  5. are there other things I have to consider in what concerns the granting of licenses for our project?

  OK, here's how my speailist license put, Data Guard as a product is free, but is not the database instance. A physical standby is a database, it must be so licensed, however the expert of the license indicates that licenses you buy for the execution of the physical standby can be ubtained at a substantially reduced rate as they would be called limited licenses. It's not data hold is the cost, it is the cost of an another database on another machine. According to you, current license, you can be covered however, you may not. Everything I say is call a specialist to license Oracle Metalink support, call the guy or gal who has sold you Oracle licenses or appeal and certified Oracle partner/reseller can help you with a specialist of the license and have a licensing discussion/examination before implementation. Oracle support is not those who understand the licenses and how this all works, he did this and like them, always thought that data guard and physical databases Eve were free and included and recently corrected, hard enough I might add.

• What is the unit of allocation best partition optimized for games and other files?

  Original title: Dear lads! I'm buying a Western Digital Caviar Black 500 GB, and I intend to optimize my HARD drive

  I want to tell you, what I usually use my PC, so you can help me with the allocation units, partitions and the locations of the page file.

  -Use computer games for most of my quality time. I wonder, what is the unit of allocation best partition optimized for games
  -I download and download a large number of files. I'll create a separate partition for this kind of data?
  -I'll have access to 2 different hard disks the following day. Will I dedicate entire storage for the pagefile? (I've got GB of physical RAM)
  Thank you in advance for your time and suggestions!

  «Also, I would like to know, if I needed a file at all, or I could skip just use it, because I read something like: pagefile is mainly used for memory images, which I don't really need (some have suggested, you don't even need it on servers).»

  When you move the pagefile to another PHYSICAL disk, you should always leave a little on C, perhaps 500 MB, for things like memory dump files. Next, you define a "system managed" pagefile on the other disk.

  It never makes sense to totally eliminate the swap file and don't forget that the swap file is not a Microsoft invention designed to shoot to the top of the hard drive space. OS UNIX, Linux and Mac too, independently use the totals of RAM...

• Data Guard and connectable to database

  Possible to have some project documents in a CDP that is used for Data Guard and other PDB files don't not ITIS?

  No, not in the current version. You must use the PDBs als for DG or nothing.