Fonts bad load for a fraction of a second

Similar Questions

• ProBook 6450 b-Win7 freezing intermittently - every 3-4 seconds, for a fraction of a second

  Hey,.

  My Win7 64 bit 6450 HP ProBook b continues to stop responding (as if the gel) intermittently - for the fraction of a second after about 4 seconds.

  Although he retains receiver input, for example if I type, nothing appears on the screen, but as soon as he comes back to life, everything they touch I pressed on will show on the screen. Same thing is on mouse clicks - say, I click on a tab in the browser, it will not pass here (or if I click several times, it shows even "not responding"), but after it becomes active, the right window will be shown, or Ctrl + F appear after slight delay. The most annoying side effect is frequent disturbances on web-surfing (probably because that when submitting the query retrieves the service goes dead!).

  He got a freshly installed Windows7 (only five days) and I ran Windows Update as well. It's a working machine, and VS2008 is the heaviest software there... Apart from that he has MS Office, a couple of browsers, code - compare, Messenger, etc., our own software and do not forget the antivirus as well.

  --> Yes, I turned off all unnecessary services, and put into service is obtained only the necessary applications, but for some reason I dared not stop / uninstalling HP services etc... Could be the culprit?

  --> Yes, I put the Windows configuration for optimal performance (for programs).

  --> It does same when nothing works, for example to test, after the reboot, I opened Notepad and start typing... the problem was there.

  --> In safe mode (I checked with the networks on), he did not show it.

  --> chkdsk /r and sfc/scannow said NOT everything was bad.

  --> I tried to look at the resource monitor too for awhile (for memory), but it no never come in red color.

  --> (Again...) Only the "necessary" services are running, everything is disabled / stopped.

  It's a HP ProBook M520 6450 b, Intel (R) Core (TM) i5 CPU, @2.40 MHz 2.40 GHz, installed Memory (RAM) 4.00 GB (3,80 usable), having a 64 bit Windows7 professional.

  Any help, advice, suggestion would be great.

  Thank you

  Yogesh

  Hey...

  As noted in any other forums, it came out as a hardware problem. Replacing my hard drive fixed it - now my ProBook and Windows7 - both are worth the money paid for it.

  I had done almost everything - stopped all services, almost all uninstalled, but still the problem persisted. This one is a work laptop and only solution given by our IT team (to the problems that you can't solve yourself) is to format and reinstall everything, whereas I was looking here for some advice on this site saner. But then one day even start Windows stopped (started taking hours and days), I had to go, and told me that the hard drive of my 3 weeks died / is dying.

  They replaced - new hard drive and a new Win7. I lost some data, but have found my peace (and speed)!

  Yogesh

• Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  I suggest you only begin by taking the measures recommended in this support article.

• Wheel gear icon show for a fraction of a second

  Hi im having this problem with my computer that this annoying icon lights up just for a split second then goes again...
  He keeps interrupting me while im playing games or watching video.

  The icon looks like this:http://s138.photobucket.com/albums/q248/icolits/?action=view¤t=hule.jpg

  can someone help me with this please...

  my computer is HP
  model: dv5-1130
  I installed all the drivers for HP...

  Thanks in advance...

  Hello

  1. Have you made changes on the computer before this problem?
  2. Are you using webcam or no matter what device wuth to Imaging your computer?

  I suggest you try this method and check the status of the issue,

  Keep the computer in a clean boot and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  If the problem persists, I suggest you send more information to help you better.

• CS4 plays for the fraction of a second, stops

  I did a project in Premiere Pro CS4 on a Windows 7 computer, for starters. I imported more than 150 .mov files. I cut the movie together, everything worked like a charm.

  Then, I moved the project and source files to my new MacBook Pro (Snow Leopard 10.6.3 Core i5 2.53 ghz, 4 GB ram, etc.), and now I have this problem. When I hit a 'play' button anywhere in Premiere Pro, the video plays for a second or less and then stops, go back to the first image it has played. I tried to make new projects, import from different media, capturing media directly in Premiere Pro, nothing seems to have an effect on the problem.

  Does anyone else have this problem? Is there a resolution to this somewhere? Thanks in advance!

  Here is the solution.

  1. open Finder and navigate to/YOUR_HD/Library/Preferences

  2 rename or move the file to the Trash: com.apple.audio.AggregateDevices.plist

  3 restart the program

• My URL bar is missing. He appears from time to time (at random) for a fraction of a second then disappear. I'm not in full screen. Help!

  Scrolling to the fact nothing and I can see is the top of firefox (not even the settings and all.

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Tap settings > Messages and then turn OFF send as SMS .

• When the sequence of process template client file is loaded for execution?

  As part of a custom process template I've created, I would like to make a few changes in the sequence of the client before file called by the process template. These changes will be then be restored after the loop finishes USE (I'm changing the sequential model).

  Another thread, I discovered that TestStand sequences cannot be edited structurally once they have been loaded for execution. My question is: what is client sequence template process ' for execution "?

  After some research, I discovered that the sequence of the client file is not locked to prevent changes to the sequence editor until the "Reminder of the main sequence" sequence step call runs in the model process entry point. At this stage, the sequence of the client file is loaded dynamically as the module at this stage.

  However, before this point, there are two places that the file of the client's sequence is used, and I want to assure you that they don't 'load the customer file for execution.  The Runstate.ProcessModelClient property is a reference to the object the client file SequenceFile and exist as soon as the entry point is called. In addition, the engine must know about the sequence of the client file to correctly call reminders of process model. Do any of these things make the movie of 'responsible for performance customer file?

  It boils down to this: can I do safely from the structural changes to my file of sequence of the client during the ProcessSetup and ProcessCleanup?

  According to the information I found in another post (see the comments of Eric_Crank on page 2), it is allowed. However, in this case customers were only make changes to the property Data of the RunState.ProcessModelClient. I want to assure you that I can use the TestStand API on the reference too.

  Also, just FYI, I got this works. I can add steps to the sequence MainSequence customer sequence file of the group stage of installation of the point of entry of the process model via the API TestStand. I ask here if make sure that it is a safe thing to do, and that there is nothing I plan not to.

  Thank you.

  Josh,

  If your sequence allows the option "optimize no concave calls this sequence", the first time the sequence run TestStand stores a copy of the execution of the sequence in a cache associated with running. As long as the sequence is in this cache you can not change, and TestStand considers that the sequence for 'run' file (see the SequenceFile.IsExecuting property). You cannot unload 'enforcement' sequence files (see SequenceFile.CanUnload). Sequences remain in the cache until it is closed. There is no way for you to remove the sequences of this cache, but you can prevent them to be added to the cache by turning off the option "optimize... ». Disabling this option should have no impact on the performance that you call the sequence only once.

  -Erik

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• How to down load for epson sx200 printer installation disc

  How doen load for epson sx200 printer intallation disk

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-SX200/drivers-support

• How can I increase the font size on, for example, the CNN page? The type is so small!

  How can I increase the font size on, for example, the CNN page? The type is so small!

  Hello

  You can increase the size of the Web page in IE 8, look down to the bottem of IE on the right side and click on where it says 100%

  This will increase the size of the page.

  Slan go foill, Paul

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• My icons and fonts are great for my screen

  my icons and fonts are big for my screen. In addition, they are everywhere. I tried to make them smaller and not luck.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         When there is change on the computer?

  ·         Change is specific to one program, Internet Explorer, or sometimes on the desktop as well?

  I suggest that you follow the steps described in the links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-hide-or-resize-desktop-icons

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-fonts

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-desktop-overview

  Also, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution