CS4 plays for the fraction of a second, stops

Similar Questions

• ProBook 6450 b-Win7 freezing intermittently - every 3-4 seconds, for a fraction of a second

  Hey,.

  My Win7 64 bit 6450 HP ProBook b continues to stop responding (as if the gel) intermittently - for the fraction of a second after about 4 seconds.

  Although he retains receiver input, for example if I type, nothing appears on the screen, but as soon as he comes back to life, everything they touch I pressed on will show on the screen. Same thing is on mouse clicks - say, I click on a tab in the browser, it will not pass here (or if I click several times, it shows even "not responding"), but after it becomes active, the right window will be shown, or Ctrl + F appear after slight delay. The most annoying side effect is frequent disturbances on web-surfing (probably because that when submitting the query retrieves the service goes dead!).

  He got a freshly installed Windows7 (only five days) and I ran Windows Update as well. It's a working machine, and VS2008 is the heaviest software there... Apart from that he has MS Office, a couple of browsers, code - compare, Messenger, etc., our own software and do not forget the antivirus as well.

  --> Yes, I turned off all unnecessary services, and put into service is obtained only the necessary applications, but for some reason I dared not stop / uninstalling HP services etc... Could be the culprit?

  --> Yes, I put the Windows configuration for optimal performance (for programs).

  --> It does same when nothing works, for example to test, after the reboot, I opened Notepad and start typing... the problem was there.

  --> In safe mode (I checked with the networks on), he did not show it.

  --> chkdsk /r and sfc/scannow said NOT everything was bad.

  --> I tried to look at the resource monitor too for awhile (for memory), but it no never come in red color.

  --> (Again...) Only the "necessary" services are running, everything is disabled / stopped.

  It's a HP ProBook M520 6450 b, Intel (R) Core (TM) i5 CPU, @2.40 MHz 2.40 GHz, installed Memory (RAM) 4.00 GB (3,80 usable), having a 64 bit Windows7 professional.

  Any help, advice, suggestion would be great.

  Thank you

  Yogesh

  Hey...

  As noted in any other forums, it came out as a hardware problem. Replacing my hard drive fixed it - now my ProBook and Windows7 - both are worth the money paid for it.

  I had done almost everything - stopped all services, almost all uninstalled, but still the problem persisted. This one is a work laptop and only solution given by our IT team (to the problems that you can't solve yourself) is to format and reinstall everything, whereas I was looking here for some advice on this site saner. But then one day even start Windows stopped (started taking hours and days), I had to go, and told me that the hard drive of my 3 weeks died / is dying.

  They replaced - new hard drive and a new Win7. I lost some data, but have found my peace (and speed)!

  Yogesh

• Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  I suggest you only begin by taking the measures recommended in this support article.

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• Everything I play for the sound of the web as people are in a well, a lot of echo.

  Everything I play for the sound of the web as people are in a well, a lot of echo. How can I set the audio to get a normal sound reproduction?

  original title: Audio playback

  Hello

  1. The question is limited to sounds when played on the web?
  2. What web browser do you use to browse the web?
  Method 1:
  Check out the link and run the troubleshooting and check out them.
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
  Method 2:
  You can also check the link and try the tips in the article.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  
  Method 3:
  I suggest that you disable improving audio speaker and check if the problem persists.

  How can I stop my music skip or break down when I play?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• Replacement for the preview handler host has stopped working

  When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:

  Replacement for the preview handler host has stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: prevhost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc5ca
  Fault Module name: hooknt.dll
  Fault Module Version: 1.52.0.0
  Timestamp of Module error: 49a 20833
  Exception code: c0000005
  Exception offset: 0000b 951
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 3081
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Does anyone know how to avoid it?

  Hi Ivan 2008,

  You can try the network drive mapping & check if it helps.

  Create a shortcut to (map) a network drive

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In CS5.5 stops playing after a fraction of a second--why?

  Just tried to use first CS5.5. I opened a project in CS5, but when I try to play a video, either in the Source monitor or program monitor, playback stops after a fraction of a second. It any time in which video I am for. In other hand, rub through the videos no problem.

  Does anyone have an idea what might be going on here? Needless to say, it is impossible to work in the first, in these circumstances.

  Try what I recommended on this thread on this problem:

  http://forums.Adobe.com/message/2949759#2949759

• Fonts bad load for a fraction of a second

  Hi guys, I have a problem here and I've reached my limits, I hope someone can understand it.

  I have my portfolio in research as I want but whenever I load the page, for a split second, that page titles are displayed in the police badly;

  

  They will quickly correct to the right font (Futura PT) and then all right, but it's annoying the hell out of me. I tried to delete my cookies and tested on another machine, but the problem persists. I also tried the reset of the police, but to no avail.

  Anyone have any ideas?

  Thank you

  This is a web phenomenon known as momentary content (FOUC) make flash while waiting for the server for the web fonts on Typekit or Google to load.  On very fast internet connections, it is barely noticeable.  Don't lose sleep on it.

  Nancy O.

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• When I start a new program, I receive program is not responsible for the messages and it just stops. I am running windows 7 on an IMAC

  I use an IMAC with an Intel I-5. I installed Windows 7 and not OS - X. Had to install drivers for the mac hardware that works with Windows 7.

  Computer seems to work very well. However, sometimes when I start a new program I get the message "the {Progroam name} is not responding" then I have plenty of wait, continue, or stop smoking. When I select Exit the message says "Windows is looking for a solution to the problem" is at - it something missing on my PC that creates this freezup?

  Isn't a normal Windows behavior?

  I asked the moderators for this move to the space of discussion of Boot Camp.

• When I wear the watch on my left wrist and Iset the orientation of the digital Crown for the side LEFT it also stops receiving notifications? I tested it again and again, but if the digital Crown is set to left on left wrist ir stops receiving notificatio

  When I wear the watch on my left wrist and I set the orientation of the digital Crown also for the side LEFT, he ceases to receive notifications, I tested it again and again, as soon as counsel for the Attorney general setting is left on the left wrist... notifications stops on the watch?

  Hello

  How notifications behave depends on the State of your devices and on the configuration of your watch. In order to provide notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or asleep and that your watch is unlocked and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information: on your Apple Watch - Apple Support notifications

• Spectrum HP convertible x 360: right-click (for the context menu) has suddenly stopped working.

  In my brand new laptop right-click suddenly stopped working (for the context menu or any other use), while I was working with Excel 2010. I checked with Word 2010 and then also with Open Office: there is no right click works with any of them, whether Microsoft or not. I spent more than 5 hours looking for a solution, I did a repair of MS Office 2010, I looked for answers in cats - but nothing seems to work. I guess it has something to do with the touchpad - but what? Thank you for any suspicion.

  Hey @jopg,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a right-click on your convertible of spectrum x 360. I can help you with that, but I'll need to know the model number above all. Once I know that I will be better able to help you.

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• Wheel gear icon show for a fraction of a second

  Hi im having this problem with my computer that this annoying icon lights up just for a split second then goes again...
  He keeps interrupting me while im playing games or watching video.

  The icon looks like this:http://s138.photobucket.com/albums/q248/icolits/?action=view¤t=hule.jpg

  can someone help me with this please...

  my computer is HP
  model: dv5-1130
  I installed all the drivers for HP...

  Thanks in advance...

  Hello

  1. Have you made changes on the computer before this problem?
  2. Are you using webcam or no matter what device wuth to Imaging your computer?

  I suggest you try this method and check the status of the issue,

  Keep the computer in a clean boot and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  If the problem persists, I suggest you send more information to help you better.

• Piece of code does not play for the animation CLICK

  myHomeButton.addEventListener (MouseEvent.MOUSE_OVER, MouseOverHome);

  myHomeButton.addEventListener (MouseEvent.MOUSE_OUT, MouseLeavesHome);

  function MouseOverHome (MouseEvent): void {}

  stopPlayReverse();

  homeHOMEanim.play ();

  }

  function MouseLeavesHome (MouseEvent): void {}

  this.addEventListener (Event.ENTER_FRAME, playReverse, false, 0, true);

  }

  function playReverse (Event): void {}

  If (homeHOMEanim.currentFrame == 1) {}

  stopPlayReverse();

  } else {}

  homeHOMEanim.prevFrame ();

  }

  }

  function stopPlayReverse(): void {}

  If (this.hasEventListener (Event.ENTER_FRAME)) {}

  this.removeEventListener (Event.ENTER_FRAME, playReverse);

  }

  }

  myHomeButton.addEventListener (MouseEvent.CLICK, ClickHome);

  function ClickHome(event: MouseEvent): void {}

  If (homeHOMEanim.currentFrame > = 0, homeHOMEanim.currentframe < = 4) {}

  homeHOMEanim.gotoAndPlay (36) ;}

  If (homeHOMEanim.currentFrame > = 4, homeHOMEanim.currentframe < = 8) {}

  homeHOMEanim.gotoAndPlay (39) ;}

  If (homeHOMEanim.currentFrame > = 7, homeHOMEanim.currentframe < = 12) {}

  homeHOMEanim.gotoAndPlay (41) ;}

  If (homeHOMEanim.currentFrame > = 11, homeHOMEanim.currentframe < = 16) {}

  homeHOMEanim.gotoAndPlay (42) ;}

  }

  In this code, the upper part works perfectly (in other words, everything that precedes the method addEventListener (MouseEvent.CLICK, ClickHome);), it is so that when the mouse passes over the home button, the animation starts. When the mouse leaves the button, the animation runs in reverse back to the start.

  However, none of the last part of the code seems to work.

  Thank you

  myHomeButton.addEventListener (MouseEvent.CLICK, ClickHome);

  function ClickHome(event: MouseEvent): void {}

  If (homeHOMEanim.currentFrame == 1 | homeHOMEanim.currentFrame == 2 | homeHOMEanim.currentFrame == 3) {}

  homeHOMEanim.gotoAndPlay (36);

  }

  If (homeHOMEanim.currentFrame == 4 | homeHOMEanim.currentFrame == 5 | homeHOMEanim.currentFrame == 6: homeHOMEanim.currentFrame == 7) {}

  homeHOMEanim.gotoAndPlay (39);

  }

  If (homeHOMEanim.currentFrame == 8 | homeHOMEanim.currentFrame == 9 | homeHOMEanim.currentFrame = 10 | homeHOMEanim.currentFrame == 11) {}

  homeHOMEanim.gotoAndPlay (41);

  }

  If (homeHOMEanim.currentFrame == 12 | homeHOMEanim.currentFrame == 13 | homeHOMEanim.currentFrame = 14 | homeHOMEanim.currentFrame == 15) {}

  homeHOMEanim.gotoAndPlay (42);

  }

  }

  For some reason-it worked, but others with the ' &' don't.