For about $200 good raid card?

Similar Questions

• Suggestions for a RAID card

  Header 1

  Currently I have an Adaptec RAID 3405 card, it is about five years old and about two of every three boot-ups, he negotiated one of the disks at half speed, i.e. 1.5Gps. To mitigate the problem, I've done as a "hot spare" HD Having replaced the cable without result maybe it's time to get a new card.  I want to do is get a RAID card allowing five internal hard drives (2 TB) and for future expansion also a SAS /... external connector.  Currently, there are three sets of external drive connected via eSATA and Sil3132 SATALink Controller. Latter is configured through external enclosures in RAID 5 and RAID0 respectively, so there is a single HD via the eSATA port. The system is of recent construction with an i7 950 and 24 GB of RAM. "' 'C' (System) drive is Raptor 10 K rpm WD, the" D "drive is a 1.5 to 7200 RPM, the 'G' disc is consists of four HDs Seagate 2 TB 7200 RPM drive 'I' is a Kingston SSD 128 GB which is used for caching. More combinations of external drive mentioned above.  In addition to change/upgrade the RAID card, I would get a late model SSD to replace my existing 'C' drive and use it to replace the existing "D".  Looking forward to your suggestions. See you soon,. Michael

  HI Mike,.

  We recommend to not to fill readers beyond 65%, depending on the performance degrades quickly at this point (beside SSD)

  I don't know that prejudice will agree.

  Intel Raid RS2BL080

  And then there is this one which is newer RS25DB080, but now you get up in the price of the Areca.

  Best software of management of each of them.

  Atto is the only other that we love.

  Nothing wrong with Areca.

  In all honesty I haven't used a LSI in 2 years and more. At one point they were my fav as comparable to those of other performance

  Even cheaper. We had some problems with them some time ago and stopped using their... also support was easy to get ahold of and well informed.

  Really, I don't know what the problem was with them...

  Scott

• Satego X 200 - 21u + Win7: freeze all playing a game for about 20 seconds

  Hello

  installed win7 a few weeks ago and I need help.

  as long as I have used default displays the drivers of toshiba (~ 1 year) windows7 tends to freeze while playing a game for about 20 seconds, and everything goes normal again.

  After searching the internal pool, I discovered that most recent nvidia driver could solve this problem, so I downloaded the latest drivers for your laptop from there. now windows freezes over, but rather a huge amount of pixels displayed for fractions of seconds. could someone help me? is it possible that toshiba will bring display drivers compatible win7?

  What are the changes accurate toshiba brings to their drivers? I cannot repeat this manual?

  * edit *.

  SRY for the bad language :).

  using the version of 32-bit win7

  Hi mate,

  The point is that you should only use the Toshiba display drivers directly because are pre-tested on the on the laptop. Other drivers don't have overheating protection, which means that you can display errors and damage to the graphics card. So I advise to use Toshiba display drivers.

  I don t know the difference between display drivers, you should ask this Toshiba directly and not here in the forum of the user.

  Maybe there is another solution for your problem like cleaning your laptop with a jet of compressed air. This could blow out the dust from the cooling fans.

• Try to reinstall Windows Server 2008, but get a message that I need to install the driver for the raid card.

  LaCie 5big Network 2 10 TB Network Attached Storage

  I'm going to re install OS windows storage server 2008 standard but system require raid driver card,

  What is driver on raid card.

  Hello ChatJen,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• "my desktop widget weather stopped working this morning, had worked for about 8 months, now it says" card not found ".

  The weather widget loaded every day for about 8 months, this morning, it has not loaded, I pulled the top of the list of widgets and once again chose the time, but now when I say that it seek to Hereford, AZ it tells me "card not found".

  WHY?

  Randerson

  Research of the question and you will get multiple threads.  In other words look for. "

  Desktop Weather widget has stopped working, location not found"either here or on Google

• I can't spend S370 because RAID Firrmware update is necessary, but this is not for my RAID card

  Hi guys.

  When I have never upgraded my Ironport Web Security Appliance for AsyncOS 7.7.0 S370 build 761 upgrade, for example, he said thar RAID Firmware update is needed for this, but if I try to update the firmware, the system told me that this is not for my RAID card

  What can I do?

  It is the result of the cli for upgrades:

  "

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .....

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 5

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Not applicable to your RAID card upgrade
  Facility upgrade is complete.

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .......

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 4

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Stale lockfile deletion

  Note: A new firmware is required for your RAID controller before you can upgrade to the version selected AsyncOS. This update should be canceled. First please update the firmware by running a new update and selecting "update the RAID controller firmware (for S360/S370/S660/S670 only required restart).

  Please see the release notes on http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html for more details on the update of the firmware.

  The upgrade of the system has failed. This could be the result of a network interruption or a bigger mistake.  If the problem persists,
  Please contact customer support.
  SFPPRXY1P.intranet.Cajastur.es >

  "

  Thank you

  Regarding issue 1: it could be this new firmware is already installed.

  Look at page 3 of the release notes (http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/RAID _...)

  After running the update of the firmware, the firmware upgrade package appears in the list of available upgrades even after a successful installation. The presence of this package does not indicate a failure of the upgrade.
   
  8
  To verify that the upgrade is running correctly, you can run the upgrade script again after the machine has restarted. If the upgrade was successful, the upgrade script indicates that the device does not require the upgrade
   
  Regarding your second question: the software upgrade:
  -you have an internet connection for update servers (the upstream proxy settings check maybe..)
  -What is your version of the software running (did you check upgrade)? Maybe you should first upgrade to 753 or some other version...
  -Maybe the reboot will solve the problem?
   

• Looking for the number of right-hand side of a built-in raid card of R415 H700

  Hello

  I have a server with a RAID card integrated S300 R415 and I'm looking for:

  Dell PERC H700 integrated RAID controller

  to install in the integrated RAID controller connector. I don't want to use the PCI-E slot card just above a RAID card because I need for Ethernet. I like the 1 GB if possible but I think they devised only integrated map of H700 with 512 MB.

  When I search RAID controller internal Dell PERC H700, I get a lot of results, but could not get an exact match for a server R415. I'm afraid that if I get homesick, she is not right. Please let know us on the H700 onboard correct for a R415.

  Unfortunately, the only card that can go in the built-in storage location is a modular 6ir SAS or a modular S300, which you already have. The SAS 6IR has no cache and only supports raid levels 0 and 1 (no raid 5). To go with a H700, you must remove the current Ethernet card, you have to slot 1.

  http://www.Dell.com/downloads/global/products/Misc/r415_tech_guide_11_18_10_final.PDF

  page 38

• Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Please help., Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Remember that only you can create an iPad app using your simple editing solution (which is included in your subscription CC). So you need a Pro or business of DPS version to be able to create a Android version.

  You can create pop-ups in InDesign using slide show options and a multi-state object. But it's all manual work, then you're going to spend a lot of time on this point, also depending on the layout of your design.

• How to install the driver for a Raid card.

  I hope that this question is of you and yours.

  I have:

  ESXi 4.1 operational on a Dell 1950. He has a basic raid card that works. This is the functioning and VM are stored.

  I installed a 1212 4 Areca Raid port cards. I have attached two Intel SSD's in raid 1.

  My Bios sees both the original and the 1212 raid cards and disks.

  Areca at startup utility says that everything is swell.

  ESXi is unable to see the 1212. I went to the Areca website and downloaded the driver for ESXi 4.X.

  I followed the instructions for all upward using the CLI interface. He begins to apply the patch, but then I thought that a meta.zip file is missing and things are abandoned.

  I went to the site of vmWare and downloaded their solution. Once again using the interface CLI things start to download but then I thought that there was no update occurred or the boot. Nothing to do.

  Here is the link to the drivers of the Areca. The installation instructions are great, but for the meta.zip file.

  FTP://FTP.areca.com.tw/RaidCards/AP_Drivers/VMware/ESXi_4/

  Any ideas? Thanks for help.

  John Ullom

  I had a similar problem with the Areca 1222 (version 8 ports of yours).

  I was able to fix by changing the zip file of Areca. In the folder while offline connection-bundle, you will find some arcmsr ARC - 1.20.00.15.vmk.100202 - offline_bundle - 262812.zip. Inside that zip you will find metadata.zip. Inside of this zip, look for vmware.xml. Modify the file as follows:

  Find the following text:

  You should now be able to install the CLI.

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• Audio Software OR Traktor - freezes for about half a second because of Dual Core

  Hello

  I've been test Native Instruments Traktor DJ Studio 3 and very often the audio timeline would freeze for about half a second and the game continues. I also have a good low latency soundcard PCI card, so that does not these breaks.

  I managed to get rid of this problem by disabling the second processor core in the BIOS setup. However, I don't like the fact that I'll have to do each time that I use Traktor.

  Is it a hardware problem or software? Software that does not use the two hearts should be able to run without problems, but apparently, there are a few interruptions happening that prevent some programs smoothly.

  That's why I'm posting here instead of the forums of NOR.

  Hello

  Why wouldn't be a hardware problem?
  The fact is that the processors with dual core Intel design and it will appear in Device Manager. Also I m sure that Intel will design with double CPU and core more in the future.

  However, I think and I'm sure it's only a software problem. Software developers have overlooked this fact that there could be another type of processors. In my opinion, you must contact the software manufacturing support to clear this problem. Maybe a few updates are available.

  That's all I can suggest.

• For a MacPro4, 1 HDMI card

  Hi all

  First of all, let me put my need for an HDMI output is for 8 AUDIO channels.  HDMI video is secondary to my situation and is not necessary.  I have also already several audio devices that have 8 (or more) out audio channels, but I need a HDMI solution specifically for audio.

  I use a MOTU HD Express with good success for this for about 4 years.  The first area is dead and the 2nd one is starting to show signs of the disappearance.  MOTU also has no drivers for this unit spent OS 10.9.x, I'm looking for other solutions.

  I'm looking for is a solution HDMI which will consider a MacPro4, 1, on the 10.11.x BONE and beyond.

  I would consider it if it would work on a 3rd card USB3 or love at first sight of the evening.  I don't have nor in this machine at this point.

  https://www.blackmagicdesign.com/products/intensity/TechSpecs/

  Are there any other suggestions?

  See:

  http://eShop.MacSales.com/shop/video/editing

• For Dimension 4600 AGP graphics card

  Hi all

  I recently acquired an old Dimension 4600. I'll use it on the side for general use for example browsing the internet, email, etc. Nothing heavy. Its current specifications are;

  Intel Pentium 4 Northwood 2.8GHz 512 Kb 533FSB

  4 GB RAM PC3200

  NVIDIA Geforce 5200 128 MB AGP

  Windows XP Professional 32-bit (can install Win 7)

  I would go on a little adventure upgrade that I find it rewarding and it gives me experience in hardware components.

  For now, I can't play videos from YouTube above 480 p as a bottleneck by the graphics card. I think I can get my hands on a Nvidia Geforce 7950GT 512 MB AGP for about £20. This is the fastest Nvidia card for the AGP slot.

  Is - this work on a 4600 and allow the best YouTube video playback? The P4 would then become the bottleneck? I think I will also replace the power supply. A model of 400w would suffice?

  In addition, an SSD on the old interface SATA 1.5 would be an improvement on the current IDE HDD? Of course, I won't sink money in old material but a SSD can be put in any latest system.

  Sorry for all the questions!

  Andrew

  Do not forget that at the end of the era of the AGP, ATI made the fastest AGP cards.  I have a Dimension 4550 discount.  I made a point to get the fastest AGP card ever made for her - an ATI Radeon HD 3850 512 MB AGP.  It is a huge map, IIRC and barely enter the 4550.  Unfortunately, I don't remember how various time graphics cards would process the video.  But the 3850 AGP was the best, there wasn't, at least for the games.  IIRC, same card ATI X 1950 Pro and X 1650 Pro were faster than the fastest Nvidia cards.  (I'm not a fan dedicated ATI or Nvidia - all my current cards are Nvidia, because right now they are the best).

  Hope this works, an SSD would you give an improvement in the overall responsiveness, due to its fast seek times, which is especially important for smaller files.  Not sure how much improvement, though.  Good point, it's that an SSD can be used in the most recent machines as well.

• Needed: Thunderbolt for MB Pro slot SD card reader (built in does not work)

  The SD card on my MBP player worked for about 3 connections and died, and looking for here and also reveals, this is a common problem.  So rather than money to waste trying to fix this, I want to just find a simple card reader SD with a thunderbolt connection (I already understood that there is NO firewire drives, my MBP is not USB3.0 and USB 2.0 is much too slow).

  So far, I found a couple of features devices/hubs with connectors USB 3.0 as well as love at first sight, but I want just SD-> love at first sight (must be smaller, cheaper and less complexity to break a day).

  So: recommendations for a SD card to the connector Thunderbolt?

  What year, make and model machine do you use?

• HP Compaq 6000 SFF Elite: Very good Sound Card

  This desktop PC HP Elite 6000 has a very bad sound system, and it must be replaced with a very good sound card.  I have two good speakers powered by USB, I use, but I need a sound card.   I have two slots... A 2.5 PCI "low profile card.

  length 6.6 "power max. 25W and a PCI Expressx1 half height length 6.6" max power 10W.

  So, which card its somone recommend here?

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum from HP Support.

  Its recommended and its low profile card:

  StarTech PCISOUND5CH2 card PCI one Surround sound 5.1 CH 8738 LX adapter + Low Profile

  ASUS Xonar DG 5.1 its PCI card & headphone amp compact support Inc.

  WELL, Creative Sound Blaster Audigy SB0570 PCI 24 bit Sound Card 7.1 LOW PROFILE

  StarTech 4 Channel Low profile PCI Sound Adapter Card PM28738-2X2A PCISOUND4LP

  Hope this helps, for other queries in response to the post and feel free to join us again.
  
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP