For CPU, memory, network, disk icons appear dimmed

Similar Questions

• Why is it so my network connection icon appear in the status bar in Win XP (anthing until 2 minutes)?

  At startup, sometimes the network connection icon in my taskbar pretty quickly (30 seconds). It takes about 2 months and then suddenly the icon will take whatever it is 2 minutes to appear for a month or two, and then it will return to normal.

  Can you tell me why this should be?   And I can do to stop what is happening?  It is VERY frustrating!

  HI Johnboy1935,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Reviews for Turbo Memory hard disk cache

  What advantage does? Is it just fluff?

  The on-board hard disk cache is not enough? If this is not the case, if it really made something, why would it not longer than 8 MB?

  I don't see any other companies offering this option and can not find much information about it.

  There someone? Someone is taking it seriously?

  Thank you

  Click here... .it gives a good reading on Turbo Memory [courtesy of AnandTech]

• Limitation of the Virtual Machine's CPU/memory resources.

  Hello

  My question on the tab "resources" with VMachine settings (I hope I picked the right branch here)

  In this tab I put a booking/Limit for CPU/memory for current VMachine.

  I have a cluster about 6 ESX servers with resource by default and a VMachine inside pool. VMachine have 1 CPU. Each ESX have 2 plugs with 4 core per socket. Each base equal to 2, 83GHz. Def.

  In this case, which by default configuration for an average CPU for this VMachine limitaion - 132582 MHz? Because in practice ESX server can give only 1 CPU for this VMachine and this CPU will have 2, 83GHz only...

  Also, I put 100% of CPU - 132582 MHz booking here... But in true VMachine will never receive this resource...

  Same question about limitation of memory...

  When this limitation will work? For what porpose such booking/limitaion here?

  Re: But, if I'm going to make a mistake and this CPU for VM value reserve, which is more physical limitation - it reduces resources processor for other VMs on a value that is more than the physical limitation of the virtual computer?

  No, the reservation only guarantees that if a virtual machine wants to take a large part of the resource at a given time VMware should give him.  If there is ever going to be a situation where the virtual machine is in fact to consider that much so it never gets allocated to this virtual machine and the amount of the resource remains available for other virtual machines to use.  Similarly, if the virtual machine just does not use the amount of the booking to a point in time, he let this resource can be used by other virtual machines.

  If a virtual computer uses only 1 GHz on a core 3 GHz system, at a given time but thereservation is 2.5 GHz, 1.5 GHz between its use and booking that is not used at this time is available for other VMS to use.  That is only if there is a period of contention between VM and VM CPU wishing to use mean 2.8 GHz it would be guaranteed to get 2.5 GHz independently of the parameters of the actions on the VM from other virtual machines.

  It is essentially the same thing with memory except that the memory usage is not as CPU flunctuate and VMware must also use more complex methods to reallocate the memory, but the leaders of the way in which it is shared using actions, reservations and limit is the same.

• Thumbnails not appearing is not for extra-large or large icons on Windows 7 for some network folders

  Windows 7 Pro on laptop

  Dell SBS 2003 Server

  Local images appear of any icon size thumbnails

  Certain pictures network drive does not appear as thumbnails for large or very large icons, without rhyme or reason as to what work photos and which don't.

  We have 10 people who take pictures with 10 different cameras more pictures that we receive clients.  network drives have 1.2 TB of free space.

  Photos I upload to the server will work fine one day and not the other.

  Hello

  Because the problem is with SBS 2003, I would suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Customer (ESXi host memory, CPU usage & network) report - VFoglight

  Customer report (memory host ESXi, CPU usage & network) - a single report, we would like to see the top host memory, CPU usage & network (in vertical graphic mode) & wise high use of cluster for monthly wise.

  Create a custom report for our requirement.

  * Click on the general TAB on the right pane - action-> click on create dashboard.

  * Select use all data-> next-> name of the dashboard-> next-> select the type of column-> finish.

  * Click on the data TAB, expand VMware-ESX host > & slipped, objects-> to select create Table

  * Select Show all on the shortcut menu select Properties.

  Select ESX, ESX version build:

  Expand CPU-CPU host-> consumer > select high CPU.

  Expand the memory-> memory host--> Select MemoryProcesses top of the page.

  Expand Stoarge-> storage-> process host select high IO-> next-> next-> next-> select the ESX host to add to this table of edge/report from the list of filters under-> click Finish.

  If this point of view to the table, I've found metric to the graph view.

  But when we ran the report, values showed n/a, unfortunately. For the cluster option, I can't use superior even to the table view.

  Some can help me pull vFoglight report.

  Concerning

  Virginia Reynaud

  One way to do this easier would be to create an array with the elements you want on it, as the name of the virtual machine, the use of the processor etc... and then you can filter/sort by CPU utilization, memory usage etc. and only have the Top 10 or anything else you like.

• Update fail, have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.

  I have Windows XP Home Edition Version 2002 Service Pack 3.  I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.  Is it possible that updates sent me are for the 2003 Version?  Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?

  CrystalBall © SEZ...

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• On windows xp, wireless network settings icon does not appear and I can't set up my new wireless connection?

  I got a new modem from AT & T because of my Wi - Fi connection failed yesterday. I have new installation internet connection and attempted to establish a wireless connection but the wireless network does not appear. I went under network settings, and there is no icon of wireless network parameters? I don't know what it takes at this point or how can configure my WiFi, that's why I ordered the new modem.

  Hi Cindy20011,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Disable the requirement of password for the network disks

  I have a LAN with Windows XP Pro and Vista computers. With some effort, all computers can see, edit and manage files on other computers. There is also network disks (that is, directly connected to the network; no computer) used for backup and storage.

  None of the computers or readers in network has a login password or user name. I intend to keep it that way. (Think of the bucolic neighborhood where no one locks doors and there is no flights.)

  Since the Vista (Ultimate) computer, when I try to back up to a network drive, Vista insists on a user name and password. But there is not. So, I can't back up to a network drive (although in Windows Explorer and the command prompt, I can write and manage networked computers and disks without problem). I was not able to find a way around this obstacle.

  I put the Vista computer is not to require a password (network and sharing Center > sharing and discovery > sharing protected by password = Off). But that seems to focus on the incoming requests (from other computers to access the Vista computer) but no outgoing requests (Vista to get access to other computers and readers). Affecting the security of the files and folders on other computers and network disks to everyone = control total (in other words, anyone who can physically access the disc should be able to write to it) did not solve the problem.

  I assume that there is a simple solution. I would be grateful for help. (Remember that the parameter/allocation of passwords is not a solution).

  I don "t know precisely how to do what you ask for - there is no commands or settings I am sensitive to this address. It can probably be done with a registry fix, but I looked and could not find one.

  I found the following solution suggested in another forum and it was the only one who seemed to avoid the need for name of user and password (or failed to mention this requirement and exists).  It may not be the same as your situation is a Win Server and so maybe a field rather than a working group, but it seems worth a try.  To be honest, I don't know yet if the command applies to your situation and can not test it with my system - but who will know soon enough. If it allows you to, maybe the location of the network password will give you tips on how to make various adjustments that will work in your situation.  I would be cautious about deleting all references without making a note of them so they can be restored if she doesn't and perhaps is still problematic.  I would also create a system restore point right before starting this process to be on the safe side.

  With the a2x compliments of http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/ :

  For what it's worth, I had this works when you connect a Vista client to Win Server 2003 R2 SIN.  I had the same questions as everyone else here, but ultimately what worked for me was of typecontrol userpasswords2 in the command run on the Vista client and go into the Advanced tab, then on manage passwords.  I found references to the NAS (DNS names, ip addresses) and removed all.  Then I disonnected all drives mapped to the SIN of working.  Then I traced the drive that I was going to use for backup by using the network card function first and that worked (I used the mapping of IP).  Then I went into the backup and restore and it said it was on a network drive and typed in the path (once again using an IP instead of a server name) and he was able to see the drive and I would like to choose what to backup, etc. and it worked.

  I hope this works.  If this isn't the case, after return and I'll investigate more trying to find a solution (if any).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A user network folders that appear for all users

  So, I have one that I'm stumping. I work in a school with a portable one-student-per-computer program. I created images for several models of computers and they deployed on the student machines. I did this with my login.

  Now that school has started, I noticed that several times when a student logs on their computer, they see a list of my network disks. They do not have permission to access the drives. There is a group policy in place of our network admin, who is supposed to let students see their own network drives, but these do not show up until you manually disconnect each of my network drives.

  The systems were Sysprep before the image was captured.

  I think there must be a copy cached my network disks resides somewhere in the picture, who gets shot in the images get deployed. I looked under the C:\Users\Default folder to see if I can find something here, but I couldn't. Google searches do not seem to be much help either.

  Anyone have any idea?

  Thank you
  Chris

  Hello

  Thanks for choosing Microsoft Community.

  The question you have posted better fits Microsoft TechNet Community.

  Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  I hope that assistance from information. Please respond to help you further.

• Update is not possible Muse - does "system memory" or "disk use" for update?

  Hello. I think that my computer is on "full".

  I want to update to Muse, but can't.

  Is it because I have a lot of things on my computer?

  If so, what is the difference between "system memory" and "disk use"? Where is the update of Muse will be "stored", system memory or disk usage?

  Thank you.

  

  Thank you, Brad.

  I discovered that my operating system is old.

  When I try and update the Mac operating system, it misfires and does not want to download past about 2 GB (have downloaded real fast, pretty much stopped download spent 2.25 GB). Do you think that my computer is old or not powerful enough for the new operating system to download from Mac?

  I appreciate the help.

• addition of CPU/memory for desktop computers in composer linked clone pool

  Hi all

  I want to add more CPU/memory for desktop computers in a pool of composer linked clone but I want to build a pool of test out changes first, while the production area is still in place. Can you screw with virtual material in the main image and then take a snapshot and build the pool of test out of it without him bring the clones in the production pool?

  I think that the process would be as follows...

  1. modify the parameters of material on the main image of Win7

  2. run the main image and let it recognize the CPU and additional memory (probably needs to restart the CPU I think)

  3. close the main image and take a snapshot

  4 create a new pool of test off the coast of this new snapshot

  Thank you!

  Yes it may seem straight, it won't cause any problems. If you want to be very careful with your prod environment, you can just clone the base image and make your tests on it.

• Up-to-date values of VM CPU/Memory in the GUI framework for ASD action

  I have a worfklow vRO work custom as an action of ASD resource that allows the user to resize their VM provisioned based on a variety of preconfigured sizes, choice of the user as part of the DSA application form. It is to replace the built in option to reconfigure so that users cannot select the random sizes for their virtual machines, all the items in the catalogue are configured with thus predefined sizes.

  The end result is that everything that the user selects meets a set of CPU and RAM for example values small = 2vCPU 2 GB RAM and these values are then used to change the vCPU and RAM on the underlying vCenter VM values, before the entity VM vCAC for CPU properties. County and Memory.Size are updated by using the line System.getModule ("com.vmware.library.vcac") .addUpdatePropertyFromVirtualMachineEntity (host, virtualMachineEntity, "VirtualMachine.CPU.Count", cpuCount, propertyIsHidden, propertyIsRuntime, propertyIsEncrypted, doNotUpdate); for example, the CPU.

  It works very well, the virtual machine is reconfigured in vCenter and the CPU. County and Memory.Size values are updated on the virtual computer in the vRA, but when you look at the virtual machine in respect of points it's CPU and RAM boxes still display the old values. These are updated to reflect the new values when the inventory in vRA jobs then run but cela could be up to an hour later in my system.

  I was wondering that if there is a way to update these GUI elements in my work, I see three possibilities:

  1. Add a collection workflow data force at the end (would be allowed, but I work in a small environment, but do not think that this would put across large environments)
  2. Rework my work flow so that it uses the option reconfigures integrated to resize the virtual machine based on the value of some users (this would probably work, but I would have to rewrite most of my workflow and test again)
  3. I missed a property or an attribute, a place that controls the values displayed in the user interface and these only need to be included in the workflow

  Anyone who provides a custom action to do something that affects the values displayed in the GUI, if yes, how do you currently part update or someone at - he of the alternatives that might require less effort to implement?

  It is on the vRA 6.2.1 with external device vRO 6.0.1 screenshots showing the situation running...

  

  > Add a workflow of data force collection at the end (would be allowed, but I work in a small environment, but do not think that this would put across large environments)

  Good or bad... That's what we do at the end of our CPU, Mem, and storage increase the flow of work.  We have yet to meet a problem.  It will be proportionally to the size of your environment in a way... but in reality, it would be more relative to the amount of change requests.  (less likely in the applications of appropriate sizes)

  > Rework my work flow so that it uses the option reconfigures integrated to resize the virtual machine based on the value of some users (this would probably work, but I would have to rewrite most of my workflow and test again)

  I don't like this idea... even if it is the method that I use for a change in ownership.  (search for ID users, collect the request and bind values machine, run request a resource workflow Action) You can give the vRO/vRA plugin service account permission to reconfigure in your environment. (I don't remember our initial plan in particular configurations... but currently in our environment reconfigures I cannot change CPU/MEM/storage).

  > I missed a property or an attribute, a place that controls the values displayed in the user interface and these only need to be included in the workflow

  Well, if find you... I really hope that you share.

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• Disk Cleanup appears randomly * solved *.

  We run Windows XP on some jobs here. Whenever I use my laptop disk cleanup appears and works on both my C (OS) and D (data) readers. He appears to be an automated process that it scans the files, then disappears very quickly. I already modified the registry to disable the disk cleanup on disks with small footprint (even though none of the drives are low on space) it. This seems to have solved the problem on my Windows 7 machines. I erased all the tasks in the Task Scheduler. It tends to get a lot worse once connected to the network and even worse when it is connected through the VPN. It happens almost to the point where the computer is unusable because it keeps flashing these messages to the top and steal the focus. I used Tweak UI if at least it does not my typing away the program I use, but it still flushing and is embarrassing. Any ideas on how to solve this problem?

  I read somewhere that, in some cases, disk cleanup opens and begins to act as it did for me after, installs Office 2010 which turned out to be defective. We use a system of distribution of the package called Marimba which says installation failed (although the Office worked very well). I uninstalled Office using Marimba and then forced a policy update to reinstall. No disk cleanup message more. I guess they made things worse when the network/VPN because our 'packages' resident on dedicated servers and Office attempted to repair itself in the background, or the installation and has had a problem of localization of sources.