For reproduction

Similar Questions

• Gradient tool leaves irregular stripes

  They are not bad, but for reproduction, they're pretty bad.

  I use PS CC 2014

  on a Mac equipped 10.10.5

  Here is the setting of the gradient tool (I tried to change settings of dithering and transparency, but that does not help)

  

  I use the parameter with the quick mask.

  In order to leave a color gradient, by masking the upper layer and then remove part of it to expose a lighter color.

  You can't really see in the image below, but there are streaks. And they are more obvious when I leave the quick mask and remove the selection (below)

  

  

  Is there a way to avoid this?

  Is there another way to make a gradient without these bars?  The image size is 300

  As long as you are working in 16 bit depth, a banding see you is in your display path (video card, display profile, calibration, control panel)- not in the file itself.

  The only exception to this is that the jpeg compression can introduce color banding.

  It is also worth mentioning that selections are 8-bit, so if you have a mask from a selection that can cause strips. But this isn't the case here - one directly created mask follows the number of bits of the file.

• Watercolor Scan impression of white spots

  

  It's my personal work I have tried to reproduce. The right one is my original and the left one is a print out on a Canon Pixma Pro-100 using Photoshop for the scan of Photomerge. My question is (I know it's a little hard to see) my original (right) has the colors blended together well enough. On the print (left), there are several white spaces (between bird wing and boat between Sun and wave). I know that in my art, these areas are lighter, but they are not white. How can I adjust this analysis is more faithful to my art?

  On another note, my original CD is about 9 "x 12" paper and used for reproduction printer paper is 8.5 "x 11". " Any advice on printing that, true to my original as possible would be appreciated. Note the borders on my original (right) and my attempt print (left). PLEASE AND THANK YOU!

  This issue of the development of the tonal response curve. A scanner is not more specific in this regard unit unless it is very carefully calibrated. It sounds and it seems that if you have lost a bit of tonal separation high-end.

  If you have a good camera with a macro lens good of flat land, you can usually get much better results that way. Set up two light sources at 45 degree angle each side. You will probably still need to adjust the tone curve, but the starting point will be better.

  Print quality plays a role too, of course - and judging reliable on the screen, you need a high quality screen which is, once again, carefully calibrated and profiled.

  In short, this is not something you can expect to work out of the box.

• Several data stores?

  Hello.

  I create a configuration on my VM project and future document.

  I run x 4 company vSphere5 hosts running on a Dell R710 all connected to a Dell EqualLogic PS6100XS for their shared iSCSI storage.

  Looking at best practices and not knowing the correct limits of data warehouses... What is the best Setup here. It is better to create a large (7 by TB) Volume and transfer this to vSphere as storage... Or...

  Create several data warehouses (each 1 TB in size) for use with Storage vMotion?

  Thank you

  J.

  Theres more to it than just the workload, IMO.

  You must consider that usually get you slightly better performance (5-10%) with several data warehouses/LUN, simply because there is more available queues.

  Also, several data stores means that you have more options to make backups, prioritization, etc.  Finally, you also have more possibilities for reproduction in the future.

  I would * not * create a unique 7TB data store.  I'd be more likely to create a smaller data warehouses from 7-10 and broadcast my virtual machines around on them.

• The backup of Duplication without a target and recovery catalog connection-oriented

  Hello
  We need restore a database - it's now my idea of using replication backup without a target and recovery catalog connection-oriented (I don't want to disturb the source database and we do not use a recovery catalog).
  Backups are stored on tapes (by Omniback from HP).
  
  The syntax should be like this:
  
  duplicated to dup_db database
  until ' to_date (May 2, 2012 02:00, ' ' the HH24: MI: SS DD/MM/YYYY).
  SPFile
  location of backup '?
  nofilenamecheck;
  
  We must use the backup from May 2, 2012 - so it's my understanding that we need to use the clause "until" to_date (May 2, 2012 02:00, ' ' JJ/MM/AAAA HH24:MI:SS) "."
  
  But because the backup is located on the Strip I do not know the value of "backup location. I thought that the name of Omniback backup could be used, but that has not worked.
  
  Now my questions are:
  -is it possible to restore a database as shown with the option-double?
  - and does the job "until" in this case?
  
  Any help will be appreciated.
  
  Rgds
  JH

  Hello

  Unfortunately, you forgot to say which version of the database, it has a double option without a recovery catalog and without connection to the main DB was introduced with 11.2 (if 11.2.0.2).

  And as you can see here:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm

  you need a backup of disk based to use it.

  "A location of disk backup that contains all backups or copies for reproduction must be available for the destination host".

  Concerning
  Sebastian

• Backup file that it changes more small PDF type file size point and vertical scaling

  I have an Adobe Illustrator CS6 document with body copy using 6.5 PT. Neue Helvetica LT STD - Bold Condensed & Light Condensed.

  After you save the file as a PDF in Illustrator by using the [smallest file size] parameter, closing and opening of the newly saved in Illustrator - PDF text of 6.5 PT is now 5.53 PT with a vertical scaling of 117.65%.

  This PDF file is for purposes of customer review - on the screen or laser print - not for reproduction. We try to keep the file size as small as possible to make the download and attachments manageable.

  In this case, my client opens the PDF file in Illustrator to check the sizes of text for legal and regulatory purposes.

  If I record the same Illustrator file to PDF using other parameters as [high quality Print], the size of the text is unchanged.

  I was able to repeat the question using Helvetica LT Std instead of Helvetica Neue LT Std.

  I have attached a few screenshots for reference.

  Screenshot Source Illustrator

  

  Acrobat PDF screenshot

  

  I found this old net 2011 where someone had the same problem - but has never been resolved:

  http://forums.Adobe.com/thread/915047

  well I was able to recreate the issue with the exact same font and numbers - matched both of your screenshots.

  To summarize "preserve Illustrator editing capabilities.

  He seems less to do with the "smallest file size" preset as it does with the box "preserve Illustrator editing capabilities". If you click on that even with the smallest size of selected file, you should not have the question - BUT you will have a much larger file (especially if there is high-resolution images).

  Now, with the default size"small file" read PDF in Acrobat it was always pulling up to 6.5 not reducing the size. Opening the rear PDF file in AI causes problems. I trying to reinterpret the changes made to the police (follow-up etc.) but since "Keep editing functions Illustraor" is not checked, it is basically guessing as to what he must do to match like the appearance of the font in the PDF file. Yes police is smaller but the extra vertical scale of the changes that it is visually a game tight.

  So if you save a PDF file without editing functions of checked you will have some funky things happen if you open this PDF back in artificial intelligence ('high quality' preset editing a checked).

  If your client wants to open in artificial intelligence, you will have to give them a larger file with Ia editing capabilities. To try a free Dropbox account or Hightail account.

• Reproduction through loudspeakers for computer, no helmet, when during an audio Skype call

  Hi all

  I've seen a few of these topics that are similar, but none that I have met have my setup. Let me describe quickly.

  I have my laptop speakers, a usb headset that I use for Skype and that I don't have permanent plugged into the laptop using a mini-jack.

  The problem I have is that whenever I'm on a Skype call, it seems, as all audio workarounds (except the Skype call), my helmet and comes straight out of my laptop speakers. My usb headset works as it should as the default communications device.

  Can any suggestions on how I make sure that the sound signal (non-Skype) happens in my helmet when I'm on a call?

  Thank you!

  Kenneth

  Hi, thanks for the response.

  Basically, the reason for audio devices is that it is my work computer. So I have decent headphones for practically everything. Then I have the headset for Skype and other communication applications. The speakers of the laptop, I didn't really the possibility of withdrawing

  I managed to fix the problem by removing an audio device that seemed to isolate my headphones into the socket. This means that the 2 devices are separated instead of having an audio option of the speakers/headphones.

  Hope this was able to help someone else with the same problem.

  Thanks again,

  Kenneth

• Specify colors for an Art reproduction

  Hello

  Which is exactly the way to ensure reproduction precise color of an art work - say a painting?

  Use the DNG Profile Editor and uniform lighting control, there's always the issue of the tone in the profile editor curve, we use linear or basic? Several times I found linear to produce a real, if a bit soft result. But which method has theory it backup?

  Kind regards

  Juan dent

  Apart from a very good DSLR (Canon 5 d Mk II) and the profiles carefully built DNG, what else can I use or need to ensure the best color match between art and photography of it?

  Good lighting with a high color rendering index and a high color temperature. DNG profiles you will get really close. If you want better than this can bring, you must type Spectrophotometric solutions mentioned above, but they will be extremely expensive.

• Audio choppy and distorted on Portege Z930 after update of Win7 for Win8 64

  I just wanted to share a tip with you that cost me some time to work, about the sound reproduction of a Portege Z930.

  When I got my new Z930 - 14L, he was running Win7.
  I tried everything like you do when you get a new machine and it worked fine - including the audio playback.

  When I updated for Win8-64 since the CD that came with the computer, everything still seemed to work very well and I had not changed any driver or Setup.

  However, after a few minutes, the linenn of audio playback. It choppy, distorted, interrupted, stuttering and I was shocked.

  Oddly enough, as soon as I turned my attention to the computer again, reading was OK again - but no screen saver came and no power saving mode has come in so little time. I knew that this was no hardware problem (because it worked in Win7), it was not a driver problem (because the first 5 minutes, the sound was pristine), he was not a ground loop, (as many have suggested) because it sounds differently.

  Thanks to another forum, I discovered that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for a few minutes, the Defender thinks it's a good idea to use idle time to scan the SSD - causing interference with audio playback. Of course, you cannot simply disable or stop the central antivirus process, that would ruin some the whole point. :-)

  _So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! _ it's probably the only time where the installation of an antivirus suite SOLVES a problem. :-)

  BTW, this is not probably limited to this antivirus product, simply play a bit with the Defender.

  Best, Yuppie

  > Then I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! It's probably the only time where the installation of an antivirus suite SOLVES a problem.

  Thank you much for sharing this details here in the community.
  I guess that the information could be useful for others who have these problems of his fellow men.

• NEW 3D LUT for F55 and F65

  All,

  We have created four LUT 3D for your rating pleasure. If please see below to download and do not forget to read the document before using to understand their function

  Because of differences in the reproduction of colors between F5 and F55, we will publish separate for each camera 3D LUT. These 3D LUT we provide now is for F55 and F65.

  You can use them for the F5 as if necessary starting point, but we will post specific F5 3D LUT which will more accurately represent the gamut of specific color F5

  Concerning

  Peter

  Specifically, I'm pretty sure that if you use these lut on hardware of the range S F5, things will be a bit saturated.

  Of course you can call the low saturation after the fact and get pretty close to correct, but a specific LUT F5 would be ideal.

  Things like the foliage green and blue neon shot with an F5 might look a bit out of control with these lut...

• Looking for driver 92HD91 IDT without Beats Audio

  I just got a HP Touchsmart 320-1122LA because he needed an all-in-one solution and because it has a touch screen. My required use is for professional audio processing, so any function 'boost' the dynamics of the sound or add any EQ setting is not accurate for my needs, it includes when no ASIO driver is used, as with normal sound reproduction (because I listen to sound sources too without going through any ASIO driver).

  Beats Audio enabled use audio improvements (compression, strengthening of sound intensity), I tried to turn off the feature, but when he arrives, the sound becomes a shit: low frequencies are disappearing (crappy thing, I'm very angry, very angry because that , it didn't happen when I disable one of the features of backup with my laptop HP G42-362LA) (, which is not "Audio Beats" and low frequencies are not cut sounds very well and very well), so I check that Beats Audio essentially try to lie to the consumer with a "low sound quality" which is more than a sound filtered bass. I don't care your marketing strategies, but I care about what I get my money and I want a driver that works without any processing of the sound without cutting off low frequencies when I disable this function of "sound directly from heaven.

  Said that, I need a full IDT 92HD91 audio driver without Beats Audio and cut out any of my frequencies. HP, can you be nice to give me this driver, as in your support page only "Beats Audio" driver is available? If not, can you let me know how to solve the problem?

  Thank you.

  Hi frrw:

  Tried your solution but did not work. This IDT audio driver is not appropriate for this version of the equipment.

  I solved the problem mainly by uninstalling native IDT Audio Controller "Programs and features" on the Control Panel, then reboot. Windows 7 automatically loads any other generic driver.

  On your statement: "I don't think it Beats Audio software problem but the speakers themselves is the real question." mmm... I use these same speakers (professional studio attached to a studio mixer) with very different sound sources (other computers, DJing, instruments) and is clear to me that the Beats Audio made down the low frequencies when disabled because it did not happen when using another sound source. My suggestion for HP is essentially to be honest with consumers with no trying to simulate a "poor sound quality' (at least I have the impression that arise since this problem happened), as nobody does the option inside Beats Audio abled get 'normal' sounding (0dB not equalized sound) frequencies. Beats Audio feature is attractive in itself because it is directly related with the quality by the consumer, so I can understand that the sound is standard with Beats Audio activated, compressed, loudness becomes strengthened and overall EQ tweaked (and really cool). This is no cool, it's that I said before. There is no need to do that. I'm a loyal buyer of HP for 10 years (at least I have buyed 10 HP devices) and this is the first time that I have a similar problem.

  In any case, thank you for your support. Best wishes.

• HOW TO BURN A SINGLE ON A CD - R DATA FILE (GUARD TRY TO BURN A DVD WHEN THE CD - R DISC AND HAS ALSO NO PROVISION FOR SIMPLE DATA FILES)

  Windows Media Player to burn a DVD when a CD - R's in the magazine.  When the BURN is a right-click in WMP to select media, it seems to focus on one single image copy copy not the program data we downloaded from BluRay to update firmware of the Blu - Ray player.

  We continue back to back up our files, but there seems to be only a reproduction of images of WMP.  I know, Windows MEDIA player!

  Suppose we wanted to save a simple letter printed on a cd - r?  I'm sure I'm missing SOMETHING!  And now I can not find disk "F" which is the reader, we used to use CD for (I'm already grey) "»

  You do not use Windows Media Player to burn data files. Start - Help and Support has lots of info on how to burn a file (search on Burns). Click right file - send to - .

  Read the help.

• installation bad for 32 vs 64 how to change to windows 7

  When I need a new hard drive I went from a 500 GB to 1 terabyte. On top of that my computer would not recognize the HD so I got a friend to do a new install of windows 7 and 1, now I can't the right key #s for authentic windows, im 2 running on a 32 instead of 64 bit I can solve this whole mess

  You must perform a clean installation.

  Step 1: Download Windows 7 64 bit in the edition that you have licensed for:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Then, perform a custom installation:

  How to: perform a customized Windows installation

• Failed to verify the product key for the download of the ISO.

  Good day to all, I am unable to check my product key for ISO download to https://www.microsoft.com/en-au/software-download/windows7.

  

  My windows is already activated, but I would change from 32-bit to 64-bit (my PC supports this) so I would like to download an ISO file to reinstall.

  I hope you all can help out me. Thank you and have a great day!

  

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Ask for help with reinstalling Windows 7 on Sony Vaio

  Hi all

  I have a Sony Vaio Y Series in which I installed a pirated Windows and also improved version at 10. After these two cases, my laptop has become very slow and can barely use it. Now I want to reinstall the Windows 7 Home Basic 32 bit original version which is pre installed, but I don't know if I have a DVD with it or not.

  If I buy an original Windows of any of the online sites, it'll work, or must it be model specific?

  Can someone tell me how to restore the original version now? I don't have the bifurcated drive where the original should have been in the store. I am based in the India but bought the laptop in Saudi Arabia.

  Any help will be really appreciated.

  Contact Sony:

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?