For required Studio packages, interference with the requirements of the Application?

Similar Questions

• EAC Package created with the ability to update. However, when an update to a CC for 2014 is available, it requires only an Adobe ID connected with the deployment of the company? This is how it is supposed to work?

  I created a company package CC with the ability for an administrator to perform updates. However, when an update is available for a CC 2014 application, an Adobe ID is asked to download and install the update and the Adobe ID must have the correct rights and permissions to perform the download if it means that it must be an account with our company related to the CC Adobe license?

  I studied and the way it looks, it's another package will have to be downloaded to get CC 2014 applications. The undesirable method would be to share the Adobe ID or plug the Adobe ID and do the installation myself (the Adobe ID that our institution is connected to our Creative Enterprise Cloud license which we give out). I agree this isn't the ideal method, especially for the company, the Mac Admin had just completed an installation of 80 iMac of the old package last month. You hope that the Adobe engineers would come up with something better.

• The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  This connectivity is not supported (except to attach them). What you trying to do?

  Barry

• I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.

  I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.
  It is upgraded, the other is an integer telling Windows Vista;
  and the little hard up and down, mouse from left to right,.
  or can you please sent a copy of a disc to my address, this is the right path for fixed my windows vista online.
  (try to contact technical support of the direct Vista operating system)
  How about upgrading to windows 7? Give me the vista on 'the base drive OEM' continues for facilities?
  ----------------

  Replacement OEM or software support of system manufacturer in most cases, you must contact the OEM (OEM) manufacturer or the manufacturer of the system directly to replace Microsoft software that was distributed by your computer. However, an exception is made for operating system service pack media *, for which you can contact us directly.

  • Contact information for the manufacturer of the computer, see the Microsoft Web site at the following address:
    http://support.Microsoft.com/default.aspx?pr=oemphone (http://support.microsoft.com/default.aspx?pr=oemphone)
  • If the product has been distributed by an OEM or a system integrator, the product ID contains the letters "OEM". Visit the Microsoft Web site at the following address, select the appropriate product family, and then follow the steps to find the product ID:
    http://support.Microsoft.com/default.aspx?PR=notsureoem (http://support.microsoft.com/default.aspx?pr=notsureoem)
  • For OEM software, the certificate of authenticity (COA) lists the name of the manufacturer of the computer under the software version name. For more information on the certificate of authenticity, see the Microsoft Web site at the following address:
    http://www.Microsoft.com/resources/howtotell/ww/FAQ.mspx#1 (http://www.microsoft.com/resources/howtotell/ww/faq.mspx#1)

    If you have System Builder software, the COA lists "OEM software" or "OEM product" under the software version name.

  * Note Service pack support only includes what is associated with the service pack itself.

  More information: http://support.microsoft.com/kb/326246

  Regarding Windows 7 - frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  1. you have cr 8.7 or better: use the dng converter or upgrade your pse in v. 13.

  2 mac App Store version is German. Photoshop Elements

• No update for lightroom (4.1) with the application manager.

  Why it is not possible to update lightroom (creative cloud) with the application manager? That said, I use the latest version (4.1). But the most recent is 4.4. My lightroom 4.1 is buggy...

  Try to go to the Manager of the Application and in the applications menu, click the Lightroom, because it would be showing the latest version that is LR 4.4.

  It will go to aehad and install the same on article 4.1 of the LR

  -Florian

• Can I share my workouts with the application of the activity?

  I got the Apple Watch and love, that the design of the application of the activity, it is nice to remember to get up every hour to my work.  The problem is that I use a lot of apps to track my training because one size does not fit all, and I don't wear my watch $400 so I exercise (I have a striped Mio Alpha 2 for that).  So I have training in the gym followed my pace heart with Wahoo Fitness and followed my weight training with Strong.  After I finished my training, I synchronize Wahoo health or myfitnesspal app.

  Then I put on my Apple Watch and I do not see this workout on the implementation of the activity.  I'm just ignoring the activity app because it does not recognize the exercise I do.  How to share the workout with the application of the activity data?  Or, at least, how can I push workouts to my application of health for the purposes of the activity?

  Hello

  It is not currently possible to share training sessions with the app of the activity in the way you describe.

  The application of the activity titles activity undertaken while wearing Apple Watch. He that follows in general everyday wear and also reflects training sessions which are recorded through the application of integrated training (or Apple Watch of third party apps, if they are able to update the rings of progress).

  Health and fitness data (including training sessions) of Apple Watch, iPhone and any other source is grouped within the health on iPhone app. These data are not (and cannot currently be) back in sync app Apple Watch activity.

  If you want Apple to consider changing how data is shared between the health app and app activity, you can do so here:

  https://www.Apple.com/feedback/watch.html

  More information:

  http://www.Apple.com/watch/fitness/

  Use the activity on your Apple Watch - Apple Support

• iOS error ITMS-90478 and ITMS-90062 downloading with the Application Loader

  Hello

  When you try to download the latest versions of my apps on iTunes with the application loader, I see these errors:

  

  I unzipped the ipa and checked that the current version number is actually 14.10.0, so I do not know why this error pops up. I tried other numbers version as well without success. I see this error with different numbers for 3 of my 4 apps. These 3 applications are 32-bit architecture right now, I'm trying to upgrade to 64-bit with this build. The 4th app was 64-bit from the start and did not show this error, but I don't know if it is related to the error.

  I compile with the SDK of Air in Windows (18.0.0.180), if that makes a difference. Any ideas why this error keeps popping up?

  Thank you

  The behavior of the two numbers has been changed recently. Previously you could not increase the number of generation without increasing the version number, which, when using test flight of Appl'e system means that the beta has go through approval each time. If you can keep the version number the same, but increase the build number, the new beta does not have to go through approval.

  Watch 'Number of Build in the iOS of the AIR' in the release notes:

  http://labsdownload.Adobe.com/pub/labs/flashruntimes/shared/air18_flashplayer18_releasenot es.pdf

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Update of the app with the application loader: bundle is not valid-> error CFBundleShortVersionString

  Hello

  One of my clients is trying to update their app. They created a new viewer of several question (via ver18).

  When you download this app with the application loader that they receive the following error message:

  "This package is not valid. The CFBundleShortVersionString key in the info.plist file must contain a newer version than that of the previously downloaded version.

  (see screenshot)

  During the audit, the app update was indeed a (iTunes) version number lower than that already on the app store. So I thought that was the problem, but when you select a higher version and try again error still persists.

  I couldn't really find someone on the forum who has had this problem.

  Tips are always welcome

  Thank you

  

  Bart - someone from Adobe can change the version number on the viewer Builder server. Contact your Adobe representative or Gold support.

  Post edited by: Matthew Laun, deleted the reference to my direct email address. All Support Gold have access to do it now.

• I El capitan, but stopped opening safari says impossible to find something wrong with the application extension

  I El capitan, but stopped opening safari says impossible to find something wrong with the application extension

  You can open it by accessing it in the Applications folder? If so, you may have a corrupt Dock alias. Click and hold the alias and make it about 1 inch away from the docking station, then release. Then drag the application in the Applications folder in the Dock to create a new alias. When you have a new alias, control - click/Options/keep in Dock.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• Cannot, sign, only get a white screen, is there something wrong with the application?

  Cannot, sign, only get a white screen, is there something wrong with the application?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• DLL for LabWindows/CVI 8.0 with the bool data type

  Hello

  I want to use a new SWIR camera in LabWindows/CVI 8.0 (Windows XP 32bits).

  The company delivered with the camera produced a 32-bit dll by using Microsoft Visual C++ 2010. The .dll and .lib and .h files include a working SDK/API (some functions with the bool data type)

  Compilation-online syntax error, variable Boolean is not a data type in LabWindows/CVI 8.0

  Generate the import of DLL-online syntax error library

  I tried to convert bool char (typedef unsigned char bool => no more syntax error but the functions does not work.)

  What can I do?

  Martin

  Hello again, Naumann!

  Microsoft Visual C++ 2010 represents Boolean using 1 byte, as stated by MSDN: https://msdn.microsoft.com/en-us/library/tf4dy80a(v=vs.100).aspx

  I guess that you import C++ functions using the syntax for extern "C". Otherwise, because of the C++ name mangling wouldn't you able to bind C++ library against your code CVI.

  You can also specify how you import C++ functions?

  In addition, because you have not described the problem as a corruption of heads or runtime error, I guess the C++ library function is called correctly the CVI. That said, I tend to believe that the problem is not really in the mechanism of interaction of C/C++, but in the C++ library. If you would start calling a dummy C++ function returning an integer from a simple CVI application that should work, because redefine bool in CVI 1 byte must ensure that settings are correctly transferred onto the stack.

  If you need to create a wrapper function of C++ that is not using bool and calls the C++ function, I expect to return the same result.

  Maybe you are missing a few prior initialization steps required? The provider of the camera also comes all example code?

  Best regards!

  -Johannes