for statements and the movie clip variable names?

Similar Questions

• setting the visibility to a movie clip variable name

  Hello
  
  I'm having a problem with this code. I'm working on tempPath3 which is a variable that contains a clip I want to turn it on. The variable contains the explicit path to the clip, and I think that it is perhaps the issue. I followed the release of the variable, and it seems that his name correctly, and I did the test 'hard-coded' where I entered just the names of clip from movie by hand and they have many work. I can't seem to find where the problem is on this one. Anyone have any ideas? If so it would be greatly appreciated.
  
  Thank you!
  
  Steve

  Try:

• Images of iPod touch - volume of the .mov clips

  Hello

  When I use an iPod touch pictures, the .mov clips sound volume is too low, even if I turn as hard as possible in Final Cut. How can I get stronger?

  Thank you!

  Unfortunately, it really isn't that you can do. You could make a new project and put just the clips that need to be more strong in there, then set volume as loud as it goes, then export than as a video, and then import that new video in your regular project (except that it is strong this time) and you can increase the volume at maximum again. If all goes well, which should help. However, the quality may be slightly reduced.

• my sound jumps and comes in and out in a game, but works very well for music and the moveis and things like that it's just the fact that in games

  sound

  Hello

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: No mapping between account and the security of ID names was done when trying to setup of Dragon NaturallySpeaking 10.

  Original title: no mapping between account and the security of ID names was done.

  I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.

  Hi Hasky620,

  I recommend you contact the support of Dragon NaturallySpeaking for assistance:

  http://www.nuance.com/support/index.htm

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• Hello, how can I choose what image the film will show before you press play and the movie starts?

  Hello, how can I choose what image the film will show before you press play and the movie starts?

  You can not.  At least not with Adobe tools.

• I am trying to download my software elearning in my account and it shows no download available, even if I paid for it and the data of the invoice is there. any help?

  I am trying to download my software on e-learning in my account and it shows no download available, even if I paid for this and the data of the invoice is there. any help?

  Oh, Yes, well, if you're talking about e-learning 2.0 Suite... it's several years old... I don't know if Adobe has no download access user around holding method for that long... or even until the next version of the product is released... especially these days with the preference of creative cloud.

  Always take the downloads, you have access to and store their future use yourself

  You can try this (which came in another post on this forum):

  Download the free trial version Adobe Elearning Suite | Adobe Elearning Suite 6.1

  But it is for the latest version of eLS, not v.2.0. It can be a real challenge to find the installer for v2...

• Hello I bought 2 months ago the annual plan of photography and now im studying if I had a student discount cause now I start to study I will be charged twice for photography and the student and all the aps plan?

  Hello I bought 2 months ago the annual plan of photography, and now cause im studying, if I have a student for aps discount all now, I start to study I will be charged twice for photography and the student all the aps plan? or he will renounce this photography automatically project the student and I will be charge for only $19.99?

  You should see the links in the document below about educational discounts:

  FAQ: Where can I get information on creative cloud for the enterprise, education, Government and teams?

  Alternatively, you can contact support for help FAQ: how to contact Adobe for support?

  You may cancel the current and pay a new subscription.

• I can not install updates for photoshop and the product is registered and properly installed

  I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  Customer chat was worthless, and I am really frustrated.

  You can download and install updates,

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373

  But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.

  Nothing can be done if this is the case.

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Just bought photoshop cs6 for windows and the installation received disc.

  Just bought photoshop cs6 for windows and the installation received disc.  Where do you find the serial number on the disc?  This should start the serial number?  The disc was in the original box and I see a number starting with 910...

  The box was in a brown envelope, and it has sticker bar code on the back with more digits.  Where should I look for the actual serial number.

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• Name of the movie clip as a variable?

  I think that this should be a pretty simple answer, but it's deceiving me. I want to assign the name of a clip to a variable and then use that variable to control any video clip he happens to be held. Let me give you an example:
  
  The script would be part 1:
  
  button1_mc.onRelease = function() {}
  If (_global.selected! = 'button1_mc') {}
  _Global.selected.gotoAndPlay ('out');
  _Global.selected = "button1_mc";
  }
  }
  
  button2_mc.onRelease = function() {}
  If (_global.selected! = 'button2_mc') {}
  _Global.selected.gotoAndPlay ('out');
  _Global.selected = "button2_mc";
  }
  }
  
  Is it achievable even remotely? I can't make it work at all. I was hoping that I just needed another type of variable...

  Hello

  _Global.selected.gotoAndPlay ('out') get a property/MC named 'chosen '. If you want to use the value of the var, you can use the scoreboard operator. To do this, you must know that accompany the MC your other MCs. Assuming that it is _root, you can use the attached code. Note that there is no dowry. between _root and support.

  HTH,
  blemmo