Similar Questions

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• Correct location for the ADF - settings.xml?

  What is the correct location for the adf ADF - settings.xml in JDev 11 g applications file? Documentation conflicted says:
  
  (1) as by Frank & Lynn Oracle Fusion Developer Guide pg 92, it appears in the correct location for the ADF - settings.xml is < workspace >/.adf/META - INF.
  
  (2) according to the ADF Web Guide, it seems, it must be < workspace > / < project > / META-INF: http://download.oracle.com/docs/cd/E14571_01/web.1111/b31973/ap_config.htm#BABCBJAB
  
  Which is correct? With our thanks,
  
  DMI

  Chris,

  the recommendation to create the ADF - settings.xml in the project source META-INF directory solves the problem of two projects to be used in a single workspace. If the two projects use ADFc MDS got confused. Notes version in R1 mentioned as follows:

  If your J2EE ADF (EAR) application contains several modules web application (WAR files) and contains more than one ADF task flows, then you can get unexpected behavior due to the web application using another its flow XML file with the same name of task (the problem is more likely to occur with the adfc config.xml file because each web application has usually one). You can avoid this problem by defining a 'root web application' separate for each web application (WAR). Web application at most one cannot have any parameters of root web app. To set the "web app root" for an application, you must add an XML file called META-INF/adf - settings.xml to WAR under WEB-INF/classes with content as follows:

  +
  xmlns:WAP = "http://xmlns.oracle.com/adf/share/http/config" >
  ++
  ++
  ++
  ++

  The value of the rootName attribute can be any name that uniquely identifies the web application (war) within the overall application (ear).

  In JDeveloper, the new file can be added as follows:

  + 1. Expand the web application project in the browser Application.
  + 2. Right-click on "Sources of the Application", and then select the item 'new ' +.
  + 3. Select "XML Document" and click OK.
  + 4. Type "adf - settings.xml ' under the file name +.
  + 5. Click on the "Browse" button, select the source directory of the project, click the iconic button "Create a new subdirectory" at the top right, type "META-INF" directory name and click OK, then click Select.
  + 6. You should now have a directory and file name "adf - settings.xml ' name '/META-INF +.
  + 7. Click OK to create the new file.
  + 8. In the Source Editor, paste in the XML file above and put a value appropriate for the rootName attribute (this is known as the parameter 'root web application').
  + 9. Make sure that the deployment for the Web application profile includes the new file META-INF/adf - settings.xml under WEB - INF / classes.

  So, if your application has a single web project then this configuration as documented in the book is good to use. To avoid the problem described above (which is in response to bug 8395585) you set it in the project's source. Note that adding adf - setting.xml in the project was presented as a work-around. The bug is closed with a fixed rate per 11.1.1.2, which means that, since the PS2 there should be no need to store the ADF - settings.xml in the source of the project more.

  So long answer that leads to a simple answer: the book is good and the documentation lists always bypass it. However, I'll fill a bug against documentation and make report understand (do not have the time to check the issue being fixed)

  Frank

• Cannot get data author and the title for the pdf files display in the Explorer of Windows 7

  How can I get Windows 7 explore to display the author information and the title for the pdf files?  I can get columns to display for the author and the title of information, but they are empty and when I click it, I get the message "not specified."   I use Acrobat to create and read pdf files.  Pdf files, I create include the author and title information in the metadata, so I know the information are here. When I used Windows XP, I could hover over a pdf file and metadata would leap upward with the author and title, but Windows 7 does not display no information in the pop up more than Tpye/size/update even if the metadata author data and the title has been entered.

  nothing to see here...

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• Make my MXF project format MXF spews on more than 25 copies of the same file: different sizes?

  When making my MXF project format MXF spews on a ton of makes MXF the same file: different sizes?

  The reason I want to make an another MXF is in the first place, because when I go directly to the project with all the various effects, Magic Bullet Looks, etc, etc.

  in another format, there are always problems.

  Therefore, I have not choice but to descend a generation to gather footage and made an exact copy of what is in the project to the MXF format before I make an MPEG or a H.264.

  The size of my project is more than 100 GB...

  In any case, my most likely choice is to go with the file with most gigabytes. As I say... He spits the different sizes.

  Is there a way to stop the rendering to spit on a ton of MXF files and streamline all in MXF format?

  I searched and searched the Internet for the answer and have checked the forums without success.

  The other thing that concerns me is that a project of more than 100 gigabytes becomes a 3.4 GB file to a 97-minute film. (It also makes a MXF to 1.5 Gig size. Everything is exactly the same thing on this record as far as I know, the rendering of Gigabyte 3.4) that she return 25 to 3.4 GB MXF files. (It's also take up a ton of space on my drive hard whenever I visit)

  It doesn't seem wise because when I visited about 8 minutes from the beginning of the film, he made a 2.9 Gigabyte file contrast with Gigbyte 3.4 file for the entire film.

  Somehow, I think that I can get the same quality when rendering the entire production.

  In addition, it takes more than 5 hours to make a MXF and I feel if it was just on 1 file, such as difference in more than 25 of the exact same rendering MXF files, rendering time would be faster and more efficient.

  Any help or explanations would be appreciated...

  Thank you

  James

  P.S. I deleted a whole bunch of MXF files to make, believeing that they were all duplicates. Of course, they were not, because the one I saved, I put in first to check and it displays only one segment of the film. Therefore, I think that all of the MXF should be connected and when you transfer one in, full MXF is displayed, however... If you delete everything except a MXF thought they are all duplicates, you only this segment of production. Seems to work quite the way to crazy? lol that sounds too wise in what concerns the gigabytes. However, first give the properties for that 1 file that you are importing, even if it is connected to all the other files. Projects likely to be total MXF gigabytes. Because I deleted all the files except one, I'm re - make everything. I'll let him place in case someone else runs into the same situation, I am sure someone will... lol

  the effects were interfering with a good record.

  It's probably not the right explanation.  Many export (which is different a rendering, take note of that) their projects directly from the sequence, effects and everything and get perfectly workable results.  In fact, I would say more that everybody does things like that.  I use MB effects for years, and yes it's hard reading.  But export always out just fine even on my system of $800.

  While your exports come out wobbly, it would probably be to fix it the problem to be solved.  But I would probably start looking for somewhere other than the effects.  Only those should not create the issue you described.

• where is the progress bar for the logic more downloading sounds

  where is the progress bar for the logic more downloading sounds?  I would like to see how many time or content that remains to download.

  Hello

  It's been moved to a discreet place in the LCD display area.

  

  Click to reveal a 'progress bar' and time display

  

  TDC

• where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  chassis: NI SMU-1078

  ini file to import into MAX

  See attachment

  THX

  Hi again Koen,

  Unfortunately, you can't simulate a complete PXI system, so we do not have the ability to simulate a PXI controller unit. The simulation, you can do is to set up the cards you want to use in you.

  concerning
  Lars

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Icons of file type for the .docx files are incorrect

  I started with a version of Microsoft Excel and Word Starter on my computer, but once I started University, I had to install a trial version of Office Professional. Since I installed the trial version and then uninstalled the starter version, my icons of file type for the .docx files resemble white pieces of paper. However, all other types of files shows an icon of Microsoft Word, such as for example .rtf files. Only the .docx icons are incorrect on the hard drive of the computer and to a flash drive I carry school (icons are correct on the flash drive on the school computers).

  I noticed several instances of this question which arises and have tried the following:

  (1) I gone through Control Panel and repair of Microsoft Office Professional 2010 (and restarted the computer).
  (2) I tried to check the default program for the .docx file type and he was placed to Microsoft Word. I have reset WordPad and return to the floor, but that did not always help.
  (3) I tried the command refresh of Cache icon through the Run dialog box.
  4) went through the registry to check the icon for docxfiletype, but my problem with this is that the icon for Microsoft Word is not a default system icon.
  I don't know what else I could try to fix this and I really should leave him alone because my files opens properly, but I think it's very boring and for some reason any he just in general that bothers me.
  Any other suggestions would be welcome!

  sacurasaturn, the professional office changed the icon to its own icon. they think it's better

  You can soothe just automatically change the icon back manually or if you want to be the original or even a custom of your choice

  http://www.SevenForums.com/tutorials/57455-file-extension-icon-change-default-icon.html

  I have a theme of black plague computer software as it is nice and ive messed with it before should not take a lot of space to all the

  also if you want to have the extencion in your registry and have more control on it here is a video tutorial on adding the extencion to the registry

  http://www.YouTube.com/watch?v=m-TW-2ngvKg

  Have fun

• I can't open the net files downloaded from the d800.  I know I need at least camera raw 7.1 to open the files, I downloaded camera raw 9.2 but still no luck.  PS plug-camera raw still shows 7.0.  I don't know how to change plug.

  I can't open the nef files downloaded from the d800.  I know I need at least camera raw 7.1, I downloaded camera raw 9.2 but was not yet able to open the files.  When I go to Ps, click plug-ins, and click camera raw yet, it shows me that I have the camera raw 7.0.  How to upgrade this plug in.

  Hi rosalbaf

  What version of Photoshop are you?

  Camera raw 9.2 will only work with Photoshop CC and more.

  

  Update your Photoshop help > update

  See that camera raw required devices supported by Camera Raw , Camera raw, Photoshop

  Concerning

  ~ Assani

• How can I change my fill of tru for the pdf file and the sign? It will never change.

  How can I change my fill of tru for the pdf file and the sign? It will never change.

  In Adobe fill & sign you can add text, checkmarks, an X, a point and a circle and sign documents.  It does not "change" the existing content of the document.  Here is a tutorial: Tutorial: Introduction to Adobe fill & sign

  Thank you

  Josh

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.