For the Hyperion System user details

Similar Questions

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Sign for the base system device

  Hello

  I simply re - install windows 8 for my lenovo Y580. and now, I got three sign for the base system device in Device Manager

  PCI\VEN_197B & DEV_2394 & SUBSYS_397617AA & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_397617AA

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  I do not know how to solve these

  I really appreciate any help

  Hi E2738729,

  Welcome to Lenovo Community!

  Check the installation of the driver chipset and Intel management driver from the link below.

  Driver Chipset Intel for Microsoft Windows (32-bit, 64-bit) 8

  Intel Management Engine Interface for Microsoft Windows (32-bit, 64-bit) 8

  I hope this helps.

  Best regards

  Agnes Kumar

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• CHKDSK runs 5 steps for the system, 3 for the non-system partition partition

  Would be - to schedule chkdsk for the partition system using GUI by selecting two options available here
  It executes all 5 steps of verification of system files and disk.
  Would be - to plan an analysis of the non-system partition disk by setting the dirty bit (fsutil dirty) put...
  It runs only 3 floors of disk scan.

  Whence this difference?

  Fsutil allows you to set the 'dirty' bit for a NTFS disk, autochk performs an immediate chkdsk /f on that volume.  When the F switch is set, the activity of chkdsk is divided into three major passes: checking files, checking the index and security descriptors.

  If you use the R (chkdsk/r) switch, chkdsk performs twice more to look for bad sectors. During step 4, chkdsk checks all clusters in use; during step 5, chkdsk checks the unused beams.

  Given that you used the GUI instead of enter the chkdsk command in a command prompt window or in the run box, you must have checked the two boxes that appear under "to check disk options'-' automatically fix file system errors" and "will search for and attempt recovery of bad sectors.»

  Most of the time, one is not using the R switch or check the box to recover data from bad sectors because it can take a lot of time and (b) "recovered data" are usually not easily usable.

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• Can we apply a createInsert single button for the two master form, details of Table?

  Mr President.

  Can we apply a createInsert single button for the two master form, details of Table?

  I want to just click a button and fields are available in form-Master and details-table.

  As below

  

  Concerning

  Mr President.

  My worm jdev is 12 c

  And I can do your job for you.

  His code

  For any organization that wants to do this job

   public void createVoucherAndVDetailsRow(){
              VoucherViewImpl voucherVO=this.getVoucherView1();
              VoucherViewRowImpl row=(VoucherViewRowImpl)voucherVO.createRow();
              voucherVO.insertRow(row);
              RowIterator iterator= row.getVoucherdetView();
              String voucherNumber=row.getVoucherId();
              NameValuePairs nvps=new NameValuePairs();
              nvps.setAttribute("VoucherId", voucherNumber);
              VoucherdetViewRowImpl voucherdetRow=(VoucherdetViewRowImpl)iterator.createAndInitRow(nvps);
              iterator.insertRow(voucherdetRow);
              }
  

  Concerning

• I just bought the 14 items and I don't see the download button. only for the operating system of the ILO. Help, please.

  I just bought the 14 items and I don't see the download button. only for the operating system of the ILO. Help, please.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• Increase in the Allocation of disk space for the guest system

  I use v.6.5.2 from workstation.  I have a lot of excess space on the hard disk of the host system, but with hindsight I initially did not award a sufficient amount of space for the guest system. Is there a quick (and painless!) way in which I can assign storage drive increased the operating system invited without workstation removal and re-Assembly of?

  Biggar Gordon

  Houston, Texas

  If you are just looking for elements run back, I wouldn't have selected Vista for guest OS... Probably be much better to use XP Pro (SP2) than any version of Vista... On the one hand, XP uses much less space on the disk and other... You can run XP Pro (easily) on a vDisk 16-20GB... IF you're dead set on running VIsta, then get the Business edition and who perform. I would never use any of the editions home for any professional use. Windows 7 is much better than Vista (Windows 7 is commonly called "Vista done right" within the it community). I'm actually using Windows 7 Professional x 64 on two of my systems. I have a XP Pro VM on my system main for when I need either the software which is only able to turn it on, or when I need to test something. Otherwise, I stick with Win7 these days.

  Vista Home (Basic or Premium) are not exactly the wisest choice for operating systems... Especially if you work on this system...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• The file is too large for the file system

  While the installation of a new Virtual Machine or add a new hard drive to ESXi, I get and error message saying 'the file is too large for the file system. Could someone help to find out what it is and how to fix it?

  What is the HARD disk that you want to add to your virtual machine?

  It may be a problem with the block on your Lun size

  1 MB = 256 GB

  2 512 GB

  4 MB = 1024 GB

  8 = 2048 MB

• user accounts may be on another partition for the file system

  I want to have two versions of the operating system on my computer, 10.7.5 and El Capitan, but as all the files from the user to access both. I can define a Directory users on the same system?

  Sure.

  Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Of course, you must repeat the above to switch it back to the user accounts on the main drive when you boot from this drive.

• Where can I find the Hyperion Planning User Variable details

  Hello

  Currently I use the EPMA Version 11.1.2.3.500 and 11.1.2.3.501.11 planning. I want to know the name of the table, which store the values of user variables. I need to pick the members of dimension of user variables. Please let me know if you have any ideas on this, also let me know the location; where I need browse server. Thanks in advance.

  Soumya

  The paintings are:

  HSP_USER_VARIABLE

  

  HSP_USER_VARIABLE_VALUE

  

  The USER_ID and MEMBER_ID can be attached with OBJECT_ID in HSP_OBJECT to return the name in OBJECT_NAME

  See you soon

  John