Similar Questions

• Development of extensions for Photoshop CC2015 (Mac). Debug mode?

  I'm new to the development of Photoshop plug-ins and will have difficulty to get my plugin test appears in Photoshop.  I get the error message "extension < name > could not be loaded because it was not signed."  Now, I understand that you are supposed to put your machine in debug mode, then you can ignore the signature verification (I added < key > PlayerDebugMode < / key > < String > 1 < / string > to Library/Preferences/com.adobe.CSXS.5.plist) but I still got the error.  What Miss me?

  Ah, found on page 11 of CC14_Extension_SDK.pdf:

  • In OS X 10.9 Apple introduced a cache mechanism for property list files. This means that property changes do not take effect immediately. For force you the change is taken into account, open the Terminal application and enter the following command:

    sudo killall cfprefsd

• Debug mode blocks Firefox

  In debug mode, Firefox correctly renders the page. The windows of Firefox and Flex are overlapped in part. I click on the header of Flex and the debugging page displays correctly. I then inspect some details in the Flex window and then click on the header of the Firefox window. The Firefox window redraws not the part that was covered by the Flex window and the browser will not respond now and I have to force a closure to restart the browser.
  
  He spends about 80% of the time, but not always. I'm holding a record of what I do to try to define more clearly the fault and will post more when I have more information.
  
  Doug

  If the Flex application is suspended (because you hit a breakpoint in the debugger), has no way for him to be redraw. What do you see? If so, saying the debugger to continue (F8) or tell the debugger to stop execution in total (with the big red button) will then allow the browser continue.

  Rebecca Hyatt
  Adobe

• HP Slate 7 more 4200CA: using slate 7 more 4200 CA in Developer Debug Mode

  I would use my slate 7 more in developer Debug Mode. I did the secret tap the Build number on the screen on the Tablet 5 times to enable developer mode and check the box for USB debugging, but the required driver is not properly installed on the device to connect to my Windows 7 PC.

  You kindly provide me with the necessary driver as well as instructions for manual installation. I tried all the solutions on this forum, but nothing works.

  I managed to get the ADB driver installed for the 7 slate more. I went to this link:

  http://h30434.www3.HP.com/T5/Android/ADB-drivers/m-p/2574571/highlight/true

  I followed instructions such as defined below, without the modifacations re PID as recommended by the other link. The pilot was then installed and works well.

  1. Please use this command to add

  echo 0x03F0 > > %HOMEPATH%\.android\adb_usb.ini

  2 and find the android_winusb.inf driver Google USB which is located in the < sdk > \extras\google\usb_driver\.

  Add sub sections and save it.

  ; HP
  % SingleAdbInterface % = USB_Install, USB\VID_03F0 & PID_5E1D
  % CompositeAdbInterface % = USB_Install, USB\VID_03F0 & PID_5D1D & MI_01
  % CompositeAdbInterface % = USB_Install, USB\VID_03F0 & PID_601D & MI_01

  3. installation manual driver for the device in Device Manager.

  After all this is done, restart the ADB service to check the device (adb devices)

  Thank you for your help.

  Best regards

• My program works only in debug mode

  Dear all,

  I'm just starting to use LabVIEW and develop a pilot thing.

  The program is rather in order because I only used to work with text-based program.

  The current program works without any error message from debug mode.

  To give an idea of how it is made:

  1. configure the serial port settings (address of the machine, baud rate, parity, etc.)

  2. send to the instument the name of a short to run program.

  3 send commands of mutiple string instruments.  These channel commands build a short program to control the instrument.

  4 send another command string to run the short program

  The problem is that it does not work in enforcement mode.  It seems to me that the communication between the device and the computer seems to be too fast.

  Given that the program is designed in a sequential manner, not have a loop while or do loop so I can not add any timing function.

  Could someone give me a tip or a good direction for this problem?  It would be really appreciated.  Thank you.

  You could do something like the amendment attached. Note how I modified the component of connector for the Subvi in the classic 4-2-2-4 operating mode and notice where I connected the terminals.

  NOTE: I guess that the VI is supposed to work only once, and that you do not use the continuous run button in the toolbar. You're not, are you?

• If in debug mode to do this, on the other...

  Hi, is it possible to check if I run the program in debug mode, and if so, a function performed, but if in release mode, to perform a different function? In other words, can ask questions if it is in debug or release mode?

  Thanks in advance!

  You can use the _CVI_DEBUG_ macro

• Code that is running in Debug Mode, but not in Standard Mode

  Hello world

  A few months ago, I wrote a code that registers the current over time.  He measures each 1 s current, and it gives the user the ability to specify how often the data should be encoded.  It can be either linear (for example, every minute), or logarithmic way (by small increments in the largest leading to greater value and the user can specify the maximum sampling intervals).  I also created a queue that will record the "last minute".  For example, if the user wants to see what happened at the last minute, he will have every second saved and that data will be added at the end of the file.

  However, it was a messy piece of code (while working), and I wanted to clean it up so that it would be easier to add in the future.  I started to learn more about state machines.  I'm slowly building.  First the user pushes playing, and then complete the where to save, intervals of maximum recording, other variables etc and click on load.  After that, the user can run a push play to start the program.  For now, it is not connected to any equipment, I wanted just the working time of recording intervals.

  At present, if it is running in debug mode, everything works well, but if it is not in debug mode, it stops after a few intervals.  I think it is most likely a race condition.  I have a few local variables, and I read that they must only be used if there are used in two places inside the same VI. But I do not think that I use in the subVIs.

  Can someone give me some advice please?  It seems it is not updated to the next recording interval.  I have attached my code.

  
  

• The code works in debug mode but crashes when compiling in release mode

  I am facing the following problem. I have code that works well when it is run in debug mode. However, when I compile it in release mode and run the executable file, code freezes and does not work. The code acquires images from a camera of Hamamatsu. In debug mode, I'm able to acquire images permanently. However, in the release version, the code crashes after the acquisition of the first image.

  I use version 7 of LabWindows/CVI.

  I would be very happy if I can get any help/suggestions for this problem?

  Thank you!

  Kind regards

  Kaddour

  Neji:

  If you search this forum for "version crash debug" or "release version crash" or other similar expressions, you will find that it is a fairly common question.  Look through the other posts that you find here to see if something applies to you.

  The debug version does a few things like padding variable, then you can sometimes invaded your space variable declared without crushing the next variable.  In the statement, the variables are packed, so if you invaded one, you replace another.  Just a possible difference.

  You can do some things in your exit code to see where things get lost, as (temporarily using printf after several instructions at beginning and end of your loop to try to identify this failure of line of code.)

  Look through other threads for other ideas.

• Debug mode - adb driver problem

  Hello

  I can't connect my phone to my PC in debug mode. It seems that the adb interface drivers cannot be installed correctly. Whenever I connect my phone, the following entry appears in the Device Manager:

  

  I activated the developer mode and usb debugging. Adb devices running in the command prompt shows no device. I also tried two other xperia (older models) phones to connect to my PC, and both were instantly detected. I tried to reinstall the drivers for my phone and I tried to use adb tool install tool (link), but it does not solve the problem. The phone works very well in MTP mode and I can transfer files to it without problem.

  My operating system is Windows 7 x 64.

  Can someone help me please?

  In fact, it seems that there is a problem with the driver. I will pass this internally.

  But you can try (worked for me in W7 x 64) is to download the driver here: http://developer.android.com/sdk/win-usb.html#top and unzip it into a folder.

  Then update the driver in Device Manager but select manual installation, 'Have disk', select 'android_winusb.inf', then "Android ADB Interface". I can connect to my M4 Aqua on ADB after installing this driver.

• Dell inspiron-Vista-debug system (startup mode)?-what is debug mode?

  Good so I think I might have a bug or something on my computer. Then when I started it up, I hit the F8 key repeatedly. Then a screen came up with a lot of options for me to choose, and I went in debug mode... When I went in debug mode and it came, my laptop came as usual... Nothing has changed, nothing else jumped up or anything... So what's the point of 'debug mode '? How did you use it?

  PS Please do not respond if you'll tell me ways to get rid of all that is on my computer. It's not what I'm looking for. All I want is info on debug mode...

  Hello

  Debug mode disables some drivers and allows to solve minor problems or major caused by software or recently installed drivers, like Mode safe mode under Windows.
  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I hope this helps.

• To open the app in the simulator of BB 10 Alpha Dev in debug mode

  Hello

  I develop black berry 10 webworks app. I use the latest version of the sdk provided and the dev alpha 10 blackberry Simulator to run the application. I am also using the ripple chrome emulator to test and debug the application.

  I want to debug the application on the simulator using the browser webkit or something like that, but for some reason I'm not able to do.

  While the application of packing, I inserted the - d option. It says on the bb site which

  "With your application running in the Simulator in a desktop browser, type http://:."

  I tried to but could not see the application in debug mode.

  I tried port numbers, since I was on the apache server

  8080,8181,85...

  Could any body help me with this

  Thank you very much in advance

  See you soon

  Because you added the - d option, it should work very well. All you need to do is put the device/Simulator in developer mode (settings-> Security-> Developer Mode) and I guess you have already done this. In almost all cases, I worked with BB PlayBook and BB10 all what you need to do now is the point of your browser Chrome this URL + port:

  http://:1337
  

  The INVESTIGATION period should not be the problem since you already deployed the app on the Simulator, I guess? So give it a try with the port number and it should work now.

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.

• How to track down the STP with SG300-52 questions and SG300-28 - the command debug debug mode password?

  Hello *.

  actually, I'm trying to track down and identify serious problems of STP loop to my switch tree SG300-xy.

  For further investigation, I would use the CLI debug mode but unfortunately the

  debugging

  debug mode command is password protected. I always "DEBUG password: *" :-((

  Could someone please help with the password of the SG300-xy switches with 1.3.0.62 firmware debugging it please?

  Thank you very much in advance for your help and your response!

  Best regards
  Matthias

  Hi Matthias, debugging is to engineer end only, it has no practical use.

  Also, if you are unable to go to the debug console, it is unsupported.

  I don't know how you can have a loop spanning trees like the tree covering weight stops redundant links. So I think that you are either using BPMH and incorrectly labeled regions or added a vlan incorrect or these switches connect in a device that is not active PLEASE and causing the transfer of issues like that.

  Quite honestly if you have a loop of network which is so bad, the best thing to do is to unplug the 1 wire at a time until you see what link has caused.

  -Tom
  Please mark replied messages useful

• From webLogicManagedServer in debug mode

  How to start the managed server in weblogic in debug mode.

  I am able to boot weblogic Admin Server in debug mode by setting Env_variable = true debugFlag. Let me know, how to start webLogicManagedServer in debug mode?

  see this

  From webLogicManagedServer in debug mode

• «Plug-in is a missing plugin resource or...» "under VS2015 in Debug mode / x 64

  I am trying to run the example: BasicDialog.

  It is compiling in Debug mode / x 64 VS2015 and race with Adobe InDesign Debug Build 9.2 CC (Win 64) WIN

  This is the latest version of Debug Indesign CC downloaded from ""technology partner Software Downloads " site."

  
  

  Version VS2015:
  

  Microsoft Visual Studio Enterprise 2015, Version 14.0.24720.00 Update 1

  I get say error:

  "BASICDIALOG. SOFTWARE DEVELOPMENT KIT. PLN"plug-in is missing plugin resources or the model/UI attribute is not specified in the PlugIn Version resource!

  .. \.. \.. \source\omlib\plugins\PlugInList.cpp (771)

  
  

  It's my production:

  1 > performing Custom Build Tools

  1 > ODFRC deletion of old resources...

  1 > merge_res.cmd - call ConcatRes

  1 > 1 file (s) copied.

  1 > ConcatRes ignored since ".". ------... \objDx64\BasicDialog"\BscDlg.Fres is an empty file.

  1 > merge_res.cmd done.

  1 > removal of old resources...

  1 > 18 file (s) copied

  1 > create library...... \.. \build\win\objDx64\BasicDialog/BasicDialog.lib and object...... \.. \build\win\objDx64\BasicDialog/BasicDialog.exp

  1 > BasicDialog.sdk.vcxproj-> C:\Indesign SDK\plugin_sdk_072_20150618\plugin\build\win\prj\... \debugx64\SDK\BasicDialog.Sdk.PLN

  1 > 1 file (s) copied.

  1 > restore_res.cmd done.

  = All build: 1 succeeded, 0 failed, 0 skipped =.

  
  

  In output mode / x 64 and Adobe InDesign CC 2015 , everything is OK.

  
  

  Where is the problem?
  

  Indesign plugins are not compatible across a different version, which means that a plugin built with an SDK for a particular version of Indesign does not load on another (major version change) version of Indesign.

  Please check from the SDK to know which version is that he intended to be used for and then try on this version of Indesign.

  -Manan