Force stop execution of a scheduled task

Similar Questions

• SQLcl throws the Exception on start and stop operating within the scheduled task

  I'm on Windows Server 2012 R2 runs a script TakeCommand (jpsoft.com) as a task scheduled using SQLcl - 4.2.0.15.177.0246.

  The script is invoked, when the account (with administrative privileges) who runs the scheduled task is not connected to the machine.

  The scenario is as follows:

  • servers both windows ServerA and ServerB (virtual servers)
  • ServerA has a SAN connected directly (as E drive)
  • ServerB remotely accesses drive E on ServerA and maps in drive E (guest ServerB cmd > net use e: \\ServerA\e)
  • the problem occurs on server b.

  Corr 04/09/2015: the SAN is not the cause of the errors/exceptions - it's just that the user who runs the scheduled task is not logged on and therefore has no APPDATA

  When SQLcl is called, the following lines are recorded... (italics: private information, "BOLD": SQLcl output not visible when the user connects while work is carried out at the request)

  03/09/2015 12:16:41.979 to connect to the jdbc URL ... (this output is to the batch calling SQLcl - everything below is SQLcl or SQL script)

  Sep 03, oracle.dbtools.raptor.console.MultiLineHistory load 2015 12:18:05

  SEVERE: HIST-013 APPDATA is null

  Sep 03, oracle.dbtools.raptor.newscriptrunner.commands.net.NetEntries load 2015 12:18:55

  SEVERE: NET-013 APPDATA is null

  Sep 03, 2015 12:18:55 oracle.dbtools.raptor.newscriptrunner.commands.net.NetEntries save

  SEVERE: NET-013 APPDATA is null

  03.09.2015 12:18:56: updated information on what will be done

  0 lines merged.

  0 lines merged.

  03.09.2015 12:19:15: updated information on what will be done
  

  0 lines merged.

  Exception in thread "cleansing" java.lang.NullPointerException

  in java.io.File. < init > (File.java:277)

  at oracle.dbtools.raptor.newscriptrunner.commands.alias.Aliases.save(Aliases.java:132)

  at oracle.dbtools.raptor.newscriptrunner.commands.alias.Aliases.save(Aliases.java:128)

  to oracle.dbtools.raptor.scriptrunner.cmdline.SqlCli$ 1.run(SqlCli.java:356)

  In addition, that everything works fine... the script is executed as planned, as expected, the queued files are created...

  So what I am doing wrong?

  Best regards, Peter

  Message geändert durch stueckl - information server added

  Message geändert durch stueckl - information server deleted - it's a general problem

  If we were talking about developer SQL itself rather than SQLcl, then the solution is simple... you can always force your user settings to a folder accessible in arbitrary writing using the ide.user.dir environment variable just add something like this line to the file sqldeveloper.conf to your installation:

  AddVMOption - Dide.user.dir =

  SQLcl, however, is hard-coded dependency on APPDATA in Windows (and user.home on Linux).  May not be feasible in your case, but in some cases simple, APPDATA can be overridden in the script that launches the SQLcl and the NetEntries and xml SQL history files are read from / written to this file.

  For example: value APPDATA = C:\Temp

• How to delete a created task and how to stop or change a scheduled task?

  Hello world
  I am new to RMAN. I copied a working sqlplus to the application procedure. Procedure has been correctly created.
  I Born here [how to schedule daily backup RMAN? | http://appsdbaclass.blogspot.com/2011/06/how-to-schedule-rman-daily-backup_3481.html]
  The procedure is created successfully. Now, please help me to do the following:
  (1) to perform this work
  (2) check if this task is running or not
  (3) that lists all other jobs
  (4) erase a scheduled task
  (5) delete a task
  (6) to edit a job
  
  Please help me.
  -Kayesh
  
  Published by: MD. Kayesh on January 7, 2013 04:45

  The procedure is created successfully. Now, please help me to do the following:
  (1) to perform this work

  work will run because you set "validated-online true."

  (2) check if this task is running or not

  query DBA_SCHEDULER_JOB_RUN_DETAILS

  (3) that lists all other jobs

  query DBA_SCHEDULER_JOBS

  (4) erase a scheduled task

  Use DBMS_SCHEDULER. DISABLE the procedure

  (5) delete a task

  Use DBMS_SCHEDULER. DROP_JOB

  (6) to edit a job

  Use DBMS_SCHEDULER. SET_ATTRIBUTE

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• services that run via scheduled task

  Hi all

  I am creating a task scheduled to start/stop services. the scheduled task must be run under the service account with minimal rights, as rights of the user or the user rights of maximum power.
  I created the scheduled task running under the account of service with power user rights to stop a service, but unfortunately the task was doing what it suppose to do.
  I did some troubleshooting and investigated as shown below:
  1. I used the runas command to run net stop under the service account that runs the scheduled task, the service is stopped, as it is assumed
  2. I connect to the server using the account service and disconnected (the session will be shown in the disk for the service account) and at the same time open a session to the server with a different account performed the scheduled task, the task does what it is supposed to do. (the service is stopped)
  Note: the scheduled task is set to enabled (scheduled task to run at a specified time)
  3 when I changed the rights on behalf of rights of administrator power user rights service and perform scheduled task, the task runs correctly and does what he must do.
  4. the service was set to be managed by the user with power, which means that if a user opens a session on the server and try to start/stop the service, he will be able to action and is successful.
  my questions will be as shown below:
  1. to start/stop the service via a scheduled task, the service account needs a session to be able to perform the task?
  2 must. the service account the highest privileges to perform the task?
  3. is there a way to avoid to run the scheduled task to run with minimum privileges? What kind of things need to be done.
  Thanks in advance for your answer.

  I would look at the link below.  This should answer all these questions.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• manages scheduled tasks has stopped working and was closed

  Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

  And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

  FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

  How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

  Craig in New Jersey

  Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

  It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

  Craig in New Jersey

  Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

• 1 program still needs to be closed: (waiting for) task host window's task to stop execution and stopping tasks that are already running

  While the closure of the pc I got the message: "1 program still needs to be closed: (pending of) task host window's task to stop execution and stop tasks that are already running".but there is no program running and I have to force it to close.how to solve?

  Hello

  Thank you for contacting Microsoft Community.
  Windows, then closing, checks all open programs. If there is, it sends a request for the program to close and wait until the program closes safely, to avoid any loss of data. But, Windows is waiting for some specified
  If you are sure that none of the programs are obviously open, you can try the following steps:
  Press Windows key + r, Type regedit and pres enter. If UAC prompts, click Yes. Go to HKEY_LOCAL_MACHINE-> expand System-> expand CurrentControlSet-> click on command (exapnd no do this). When you click (or select) control, you can see WaitToKillServiceTimeout. Double-click it to change the value. Set the value to 500 or less than that. Click Ok, and then close the registry editor. Now, restart the PC. If the problem persists, stop and try again and check.
  Be careful with registry access as incorrect values or remove the unknown keys can prevent Windows to start and it will fix it.
  Response if the issue is not resolved.

• whenever I start my pc it automatically opens the disc clean up, I don't want that. How to stop this scheduled task?

  whenever I start my pc it automatically opens the disc clean up, I don't want that. How to stop this scheduled task?

  Ive tried to delete, but I don't think that it wrks. It appears again on the performance of the tasks. I actually put it to daily nd now I can't undo this action. is it possible to change the disc clean up [Settings?] I can't find it. Ive tried properties, but it will not let u

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• What is an indication (0x3) "last execution results" from the list of scheduled task?

  I get the 0 (x 3) in past execution results when the scheduled task runs at night, but the task sems don't work that the files are copied to the external drive?

  Hello

  1. what task is scheduled when you receive this error message?
   
  2. what kind of files were copied during the error 0 x 3?
  System error codes.
   
  http://msdn.Microsoft.com/en-us/library/ms681382.aspx
   
  Method 1
   
  Step 1
   
  Run a scan of system files Checker
   
  http://support.Microsoft.com/kb/929833
   
  Step 2
   
  I use a robocopy command, then try to re-register Robocopy.exe, you must:
  
  1) click Start
  
  (2) click on run
  
  (3) type regsvr32 Robocopy.exe
  
  (4) press on enter
  
  (5) restart your computer
   
  If you are still facing questions, please go to.
   
  Method 2
   
  Download copy tools Robo (original file intended to be produced server, but the files specified robocopy applies to Windows 7 included in the KIT)
   
  http://download.Microsoft.com/download/8/e/c/8ec3a7d8-05b4-440A-a71e-ca3ee25fe057/Rktools.exe
   
  Note: If a compatibility Manager appears, click on the program, the installation can be dormant however it is tested to be a successful installation of Windows 7.
   
  Please post the results of the resolution of the problems.
   
  Hope this helps

• How to force the display of user account control to run the scheduled task

  I have User Account Control setting on notify me when a program wants to make changes to my computer (the recommended setting).

  I created a scheduled task: create a restore point, using a software called Quick Restore Maker. User accounts in the program control screen comes up and stays on, ends by closes but ends the program. As I'm not at the computer when running task, I can't cancel the screen. The display ends by disappears, but the program itself does not run.

  So the question is: How can I force screen UAC a program to run without changing the UAC universal computer settings that would allow any program to change my computer without any intervention from me?

  Thanks for your help.

  There is no way around the need for approval of Admin indicated by the parameter of the UAC.

  Reduce the level of UAC would be the only thing you can try, but I understand that this would not be a safe way to proceed for normal operation.

• Scheduled task 'RUN' after 'stop running '.

  With the help of the ADC 9.1.1
  Running 'AD organization finding Recon '.
  
  The scheduled task continues to be displayed as "RUNNING" even after the execution of the task was completed in the Web console or design.
  After restarting the IOM server it is always marked as "RUNNING".
  
  Ideas, any help would be appreciated?

  Hello

  It is a well known problem in the Scheduler of the IOM, some times what happens that this task is not completed or terminated even while State continues to run. I'm sure that the task does nothing. What you can do is just go to design console and type 'INACTIVE' status box and save... Next time when the task will run, it should be fine.

  Concerning
  Nitesh

• scheduled task shutdown.exe still running after disabling SERVER 2008 R2

  Hello

  A scheduled task still running after people with disabilities (shutdown.exe/s) on my network. We have disabled the task in the Task Manager. and updated computers with gpupdate/force. However, it stops again. How can I make this stop?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• No scheduled task running in Windows 7

  I am running 32-bit Windows 7 Home Premium.

  There are about 5 days all tasks stop running scheduled. Task Scheduler says:

  Summary: 0, total 0-0 running succeeded, 0 stopped, 0 failed

  The Scheduler and its dependencies are all running and configured to start automatically. I see nothing in the event logs to explain this, even if maybe I'm looking in the wrong place.

  I have run the System File Checker and found no defects.

  Can someone advise.

  Thank you. Kind regards... Bernard

  Thanks for your suggestion of Marilyn...

  It took a while to work, but the answer has proved to be much simpler than I expected.

  As you will see, in my original, Scheduler task message indicates:

  Summary: 0, total 0-0 running succeeded, 0 stopped, 0 failed

  When I check the report of the task status on the Task Scheduler (local) page.

  However, what I didn't realize is that this summary is produced only if the Task Scheduler is set to activate all tasks history. My copy has been set to disable all tasks history and since I changed this setting, execution details and the summary tasks are appearing as I expected.

  Thanks again for your help.

  Kind regards... Bernard

• Scheduled task (dba_job) running immediately after starting

  Hello
  
  
  Clone of post a scheduled task (dba_job) runs immediately after startup. This task must be performed only in Production - not in the test environment.
  
  
  I know that we can stop the task to run using exec dbms_job.broken (42, TRUE), but to do this, I have to start the database.
  
  The job runs as soon as I start the database. This creates problems.
  
  
  Could someone help to prevent the execution of this work.
  
  
  Thank you
  Prasad Arava

  JOB_QUEUE_PROCESSES = 0

• Question of scheduled task of IOM

  Hi all
  I have made some changes to my job schduled, compiled and replaced the file in the folder of the IOM/ST after the server has stopped. But somehow the IOM is still running the old scheduled task. I can say that because I can't see the changes is forced or the log messages are written in the log file.
  
  I checked the class name in the console Design and it is right, that is, I make changes in the correct file of ST. Where can I check and detect the problem. All the world faces this question in the past.

  Make sure that the same class is not present in any other jar to the classpath of IOM.
  Start by checking the JavaTask etc...

  Thank you
  Suren