Forgot to activate back account user and administrator

Similar Questions

• I have no admin rights on my account user has administrator rights!

  Hi all

  Clean install windows 7 on SSD, in the installation process, I made an account. Who has administrator rights. However I regularly get error messages (while trying to share or move folders or windows update) saying that I don't have the rights to do so.

  Check user accounts (I see my own (admin) and the comments which is disabled).

  Anyone?

  No, I'm afraid that the restriction of administrator UAC is there for good. Short of turning off UAC, you're stuck with right, click Run as administrator. FWIW, I need these privileges all the time but have accepted the warning of the UAC rather that turn off UAC. It may take a while, but sooner or later, you will get the UAC popping up when least expected. Be careful as acknowledging the warning when you do not expect his speech.

  If you prefer typing with the right mouse button, click on the main windows then type explorer.exe and press Ctrl + Shift + Enter. You will always get the UAC but may prefer this method to achieve this.

  In short, learn to accept the UAC as the price to pay to use an operating system also excellent that must provide the parental control for the lowest common denominator.

• Locked out as a user and administrator but others ok

  Vista Home Basic. Service user profile service has no logon. User profile cannot be loaded

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

   

   

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• 2600 router: faced with setting up the accounts user and AAA

  I use SDM to configure easy VPN connection and being a newbie I'm fighting with AAA and the creation of the necessary user account. The SDM Assistant said I must have active AAA and a user account. I found this doc from Cisco using google:

  http://www.Cisco.com/en/us/docs/iOS/12_2/security/configuration/guide/scfathen.html#wp1000971

  and following the instructions, I entered these commands in the cli:

  Router (config) #aaa new-model

  Router (config) #aaa authentication login default local

  but my normal connection and the user name and password do not work in the CLI as soon as I did it. I have the router powerdown and restart it to retrieve the control.

  To be honest, I found things really hard Cisco instructions, I don't understand method-list RADIUS Kerberos GANYMEDE stuff so I was wondering if there was simple instructions there to set up the user account necessary to go forward with the vpn Wizard easy in SDM.

  Thanks for the pointers.

  Hello Anthony,.

  Once you enable the aaa new-model, all applied to the invalid lines previous authentication mechanisms. That's why you should do one of the following values

  Do not issue 'aaa authentication login default local' or if you are forced by SDM, or create a username for yourself with high private, because this command will effect console or VTY lines that their authentication is left by default and require the username and password each time you connect, or you can create a list that has 'no' as a method and apply to the console line to ignore the console authentication.

  username anthony priv 15 password xxxx

  Once you enter a username as shown above, you can connect via the console with this username and pass if "aaa authentication login default local" is issued.

  RADIUS and Ganymede methods are servers that has the ability to contain the names of users with more advanced configurations. For simple authentication, you can use local authentication, this is why you should not mess with Radius or Ganymede at the moment.

  Concerning

• Impossible to activate Active Directory users and computers (and other features Windows AD)

  I have Windows 7 Professional Service Pack 1 and I installed the Remote Server Administration Tools, but when I go to the program and features-> turn Windows features on / off power and try to check the choice of Active Directory, and then click OK it attempts to install, but then a window pops up with the message "an error has occurred. Not all the features where successfully changed. "This happens on 2 different installations of Windows 7 I have and I can not find newspapers or additional information anywhere to help me understand why this is the case.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Why am I being asked to be "Administrator" when I am the only user and administrator in the Panel, so it will install my programs in Windows 7 Ultimate 64-bit?

  I've updated for Windows 7 Ultimate 64-bit.  Now, I'm trying to install my programs (again!) he continually says: «the installation program has sufficient privileges to access this directory...»  This installation cannot continue.  Log in as Adminisitrator. »
  I am the administrator.  There is no one else.  Control Panel says I have administrator privileges. How can I get around this to install my programs will install?

  Have you tried to do a right click on the file and selecting "run as Administrator"?

• Native account user and hyadmin

  Hello
  
  I have a question about creating native users. Is it mandatory to have the password for new native users we create same as password for hypadmin? If Yes, should it be the same since we could use these native user accounts to schedule batch jobs?
  
  Can someone please clarify this. Any contribution is appreciated.
  
  ~ Hervé

  You can choose any password you want to assign native accounts, they are just accounts.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I got 3 accounts, two were administrator accounts and a regular user account. Now, I find that both my administrator accounts have become odinary leaving me without any user accounts administrator account. How can I now get an administrator account?

  I don't remember doing anything that could have caused this problem.

  Enable the built-in Administrator account log in, make your changes to user accounts, search for malware to be proactive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  First try a system restore to when things worked. If this fixes things, very well. If this is not the case, try to start in Safe Mode, because the normally disabled built-in Administrator account can be activated if no other administrative user is available on the system. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the diagnostic menu where you can use your arrow key to select Mode without failure. If the built-in administrator is enabled, you will see an icon for it on the Welcome screen.

  If the above does not work:

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  Remove the installation DVD and reboot the system in normal Mode. You will see an icon for the administrator on the Welcome screen. If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows Vista (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. If this isn't the case, you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third burning like Nero, Roxio or freeImgBurn software to burn the image .iso image file, not in the form of data.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account. After getting things sorted, disable the administrator built-in yet for security reasons * after * creation of a user and administrative per the recommendations below.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  MS - MVP - Elephant Boy computers - don't panic!

• I deleted my user accedently account, how can I recover my password user and administetive?

  Hello
  I have windows vista and has a problem with the password user and administrative. By accidentally I deleted my user account so I can not connect in my browser. I also another account of user on this computer but unfortunately I do not remember this password, how can I recover my password and reset my account?

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How can I remove the administrator in users and groups

  I give my MacBook to a family member.  I just upgraded to El Capitan.

  I opened system preferences > users and groups > and added my brother as a new user and administrator.  I was unable to remove me as an administrator, and now I can't stop computer without getting the warning "stop can cause other users connected to this computer to lose unsaved changes."  If I switch to the user the same message appears then try to stop.

  Help please

  What to do before you sell or give away your Mac - Apple Support

• Groups in the console user and IOM 11.1.1.5 administrative assistance

  Hi all
  
  I've been looking online and for a version 9.1, it is possible to create groups.
  I work with a 11.1.1.5 version of OIM.
  
  I can't find where to create groups by using the console user and administrator.
  
  Can someone give me the locations on where to create groups.
  
  Thanks in advance

  11 g, you can create roles. There is nothing called Group of 11g.
  g 11 roles do not correspond to groups of 10g

• Thin Client T520: Hp Thin Client Test without account 'user '.

  Hello

  My problem is that I created a new account user without administrative privileges for a long time and yesterday, I deleted the user account original (I still have the administrator and the new), but the customer never resumed. I can see the mouse, but it does not start.

  I have the Lightweight Client T520 with Windows 8.

  According to the message that you have posted, I wish to confirm that the operating system could be damaged and need to re - install the operating system on the workstation again to make it work

  This Thin Client device comes with various types of operating system by default, as shown below:

  

  Here is the link to this page: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6875922 & lang = to & cc = us

  I don't see Windows 8 (32 bit) operating system on the HP Support Site's list

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• It not install on Win7 Home - don't say no admin tho I'm only user and admin profile

  Running Acer laptop Win7 Home Edition, Avira Antivirus, Windows Firewall. Mozilla's Firefox downloaded installer stub. On running it, it reads "extract" and then displays a message saying "some facilities may not work Installationavecuneracine current user" and shows two options: run with the current user and administrator (to be completed only for the administrator password).

  Click the current user and the program disappears - nothing happens. There is only 1 profil_utilisateur on this system - user current, called 'a' with privileges and no password. Click on administrator insists on the password, will not accept the empty password field and disappears.

  I created an ID of administrator with the password and logged, but the same two options new pop up - and the disappearance even once program is selected.

  Tried with Avira and disabled Firewall. Makes no difference. Running Firefox earlier version with the active user profile and no problem. When the upgrade program itself, this problem started while I have to use IE or Chrome.

  I'm typing this from my desktop system where Firefox works fine.

  OK, your sub windows 7 when you downloaded the file to go to her and right up until it clicks. On this list, there is an option "Run as Administrator".
  Click it and proceed with the installation.
  This is what may be the problem as Windows 7 has problems with UAC.

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• My wife is the administrator user and she forgot her password and she did not save what we can and there are only standard users on this PC, what can we do?

  My wife is the administrator user and she forgot her password and it does not back up and there is only standard users on this PC, what can we do?

  If your wife was using his account with "computer administrator" privileges, and then use the built-in account named "Administrator".

  By default, the built-in account named "Administrator" doesn't have a password.  If you have XP Pro, you can access the administrator account (with no other connected users) Welcome screen by pressing CTRL + ALT + DELETE twice to bring up the "classic" logon window  Enter the administrator user and leave the password empty box.

  In XP Pro or XP Home, you can access the administrator account by restarting mode without fail (repeatedly press F8 to leave immediately after the computer starts / restarts; if you see the Windows logo, you waited too long and you will need to try again).  Once Windows starts in Mode safe mode, the administrator account will appear on the Welcome screen.

  Once you are in the administrator account, go to control panel > user accounts to reset the password of an account with "computer administrator" privileges or create a new user account with privileges "computer administrator."

  If the password that you lack to the built-in, ' administrator' account politics of Microsoft for these forums forbid us to provide you with any information that might help you to bypass this password.