FORM PARAMETERS

Similar Questions

• PDF reports and forms11g, Weblogic, call report form, parameters

  Hi all.
  I had trouble putting in reports 11 g in pdf format. This is how I solve it.
  I hope to help someone of you and also anyoe can correct me if Im wrong.
  
  1. I installed a configured server weblogic 10.3.3, also of forms, reports, portal, discoverer 11.1.1.3.0 and database 11.2
  
  2. I have recompiled my forms and reports 10 gr 2 on 11 g, also the libraries of the pll.
  
  3. that's what I call the report of my form, I add settings to a list of settings called PL, and then invoke the prucedure rp2rro located in the library of rp2rrp.pl:
  
  PL: = create_parameter_list (TDATA);
  add_parameter (PL, 'PARAMFORM', TEXT_PARAMETER, 'NO');
  add_parameter (PL, 'ORIENTATION', TEXT_PARAMETER, 'PORTRAIT');
  add_parameter(PL,'EMPRESA',TEXT_PARAMETER,:global.Company);
  add_parameter(PL,'NB_EMPRESA',TEXT_PARAMETER,:global.CompanyName);
  add_parameter (PL, 'DESFORMAT', TEXT_PARAMETER,: CG$ CTRL.) DESFORMAT);
  rp2rro. SETREPORTSSERVER(:GLOBAL.) REPORTSERVER);
  add_parameter (PL, 'SESSION', TEXT_PARAMETER, to_char (SESION));
  Add_Parameter (pl, 'DESTYPE', TEXT_PARAMETER, 'SCREEN');
  rp2rro.rp2rro_run_product (REPORTS,: CG$ CTRL.) REPORT_TYPE, SYNCHRONOUS, DURATION, FILESYSTEM, PL, NULL);
  destroy_parameter_list (pl);
  
  4. when pr2rro Gets a list of parameters (PL) found no Desformat setting that I sent the form. so, I change the library of pr2rro.pll. It's the area of the revised code:
  (just added the var number 'Desfn' that he get_parameter_attr() above.)
  
  PACKAGE rp2rro IS BODY
  / * Package variables * /.
  
  rp2rroDesformat varchar2 (30);
  rp2rroDesname varchar2 (200);
  rp2rroDestype varchar2 (30);
  rp2rroReportOther varchar2 (2000): = ";
  number of rp2rroComm_mode: synchronous =;
  rp2rroReportServer varchar2 (100);
  rp2rroVirtualDir varchar2 (100);
  rp2rroReportsInterface varchar2 (30);
  
  / Thisline by ingenio * /.
  Number of Desfn;
  
  
  5. a couple of lines above, you can find this:
  (here I added get_parameter_attr (mparamlist_id, 'DESFORMAT', Desfn, rp2rroDesformat); for re-branded, the value of the parameter called Desformat in var rp2rroDesformat)
  
  PROCEDURE rp2rro_run_product (product NUMBER, reportFile VARCHAR2, commMode NUMBER, engine NUMBER, fileLocation NUMBER, mparamlist_id, ParamList, display VARCHAR2) IS
  
  BEGIN
  / * Handle calls only reports * /.
  
  / Thisline by ingenio * /.
  get_parameter_attr (mparamlist_id, 'DESFORMAT', Desfn, rp2rroDesformat);
  
  IF product = REPORTS THEN
  Handle_rp2rro_run_product (product, reportFile, commMode, engine, fileLocation, mparamlist_id);
  END IF;
  END;
  
  
  Sound now works very well with PDF, RTF, HTML, delimited formats, not with EXCEL (spreadsheet) Im working in this.
  I accept any help.
  Thanlks
  
  Published by: Ingenio on November 29, 2011 14:44

  I solved my problem of edition of the library of rp2rro.pll, I debugged the library, and I found the format sent by forms was missing, so I catch and place it directly:
  GET_PARAMETER_ATTR (mparamlist_id, 'DESFORMAT', vnumb, vvalue);
  setDesformat (vvalue);

• [SOLVED] Create ViewObject as placeholder for the parameters of the form

  Hello
  
  I posted the following question (JDeveloper 11.1.2.3):
  
  http://StackOverflow.com/questions/14592202/create-ViewObject-as-placeholder-for-form-parameters
  
  Basically, how do you create a ViewObject that can perform validation and harness LOVs, but don't don't don't need to be supported by any source of data?
  
  Is it still the right approach?
  
  Thank you!

  Hey, Timo.

  This can be accomplished without an OA. As far as I can tell, it's the right answer, but this forum does not allow me to choose my own answer as correct, but somehow allows me to report my own post as an abuse. Strange.

  Find the property formatted (and selected as correct) answer on StackOverflow: http://stackoverflow.com/a/14611815/59087

  # Solution

  You have:

  -Create a view object to be programmatic, with the desired attributes.
  -Configure the view with validation rules object.
  -Configure the Module of the Application.
  -Create the form on the web page.
  -Update the page link to create a new line.

  # Create object View

  Create the view as follows:

  1. type Control+n to open the * New Gallery *.
  1. search and select * view object *.
  1. click on * OK *.
  1 set * Package *, * name *, and * display name * properly.
  1 set * data * to * programme *.
  1. click on * following *.
  1. click on * new * and provide a significant attribute name.
  1. click on * OK *.
  1. Add the remaining attributes.
  1. click on * following *.
  1 set * Updatable * to * always * all attributes.
  1 set * Type * for the appropriate data type.
  1. click on * finish *.

  # Configure Validation rules

  Configure the following validation rules:

  1. click on the * attributes * tab.
  1. Select the desired attribute.
  1. click on the * tab Validation rules *.
  1. click on the * + * icon in the * section Validation rules *.
  1 set it * rule definition * as required.
  1. set * error * as required.
  1 Repeat to add validation as necessary rules.

  At this point a view object has been configured and the * list tab of values * can be used to reference LOVs based on a query.

  # Configuration Application Module

  Configure the module of the application as follows:

  1 double-click on the module of the app.
  1. Select * model data * tab.
  1 Shuttle the object view of * available see items * to * model data *.
  1. remove the * 1 * suffix.
  1. save the application.

  Note: If the view object is not visible, restart JDeveloper.

  # Create Web Form Page

  Create a web page to the form as follows:

  1. create a new JSF of the object view page.
  1 update the * data controls * see the instance of the view object.
  1. drag and drop the view on the page object.
  "1. Select * form" ADF form *.
  1 check * include submit button *.
  1. click on * OK *.

  The web page is created.

  # Update the Page link

  Cannot change the attributes of the view object unless there is a 'line' created for the instance of the view object. Creation of this line in memory must occur before the display of the content on the page. Accomplish this as follows:

  1 extend the data controls to reveal the view object * operations *.
  1 drag * Create * in the facet of footer.
  1. Select * ADF button *.
  1. right-click on the page.
  1. Select * go to Page definition *.
  1. click on * + * next * executable *.
  1. Select * invokeAction *.
  1. click on * OK *.
  1. set * id * to: create
  1. set * lie * for: create
  1. click on OK.
  1. the refresh value: * prepareModel *.
  1. save all.

  You can now remove the create"" button.

  The validation is applied, and data-driven LOVs can be used.

  Published by: Dave.Jarvis on January 30, 2013 11:15

• do not send email from contact form

  I recently tried to do a form of contact in Muse.  Recently, I upgraded my email on a business gmail account and my adobe id email opted for this new email and address.  The contact form I did also corresponds to the same email address, but I still do not receive any emails from the contact form I created.  Emails are some how always bounce back to my old email address (which was a standard yahoo email).  I can't understand where the problem is, please help!

  Could you please check the form parameters and check you always use only not yahoo in the same as email address shown below. Additionally, if the email is updated in the muse project, try to download the site again and see if that helps. ?

  

• Access the settings of ActionRequest request with the multipart/form

  Hello
  
  I have a producer of weblogic portlet that has form enctype = "multipart/form-data". Now, even if I correctly put action according to the JSR 168 standards such as:
  
  < form name = method "Checkin" = "POST" enctype = "multipart/form-data".
  action =' < abcportlet:createURI > < abcportlet:URIAction value="active.document.doUpdate"/ > < / abcportlet:createURI > ' >
  
  but in my processAction method, I'm not able to get the action parameter. Infact actionRequest GetParameter returns null.
  
  Further investigation, I found that this happens because of enctype, and the solution proposed to use the common file upload. I used the common upload and retrieve the settings but am not able to retrieve the parameters of the action that is embedded in wsrp-interactionState.
  
  Is there a way how I can get in on the action of portlet parameter?
  
  Thank you
  Andréanne
  
  Published by: anshuman.roy on December 11, 2008 10:18

  Hello Michelle,.

  Unfortunately, you have found that a bug in the implementation of JSR168 form decoding WLP here is no way for you to get the form parameters and parameters of the action at the same time. We already have a fix for the next version of WLP - if you open a case of pension to get a patch released, please refer to CL (not CR) 1169718. If you want that for me to open a request for change for you, which could speed up the support process, please let me know what version of WLP you use.

  Kevin

• Removal of the appearance of the form of param

  Hello
  Is it possible to remove the appearance of a form of reports setting during the passage of some form parameters using the built-in... form run_produch?
  
  Note: I use Dev2000 v.6i with patch12
  Thank you
  SIM

  use PARAM_FORM = 'NO' as a parameter

• JavaScript question - do not click on dates in a calendar

  We try on online tennis court booking site. When I click the calendar icon to select a date in the calendar, I can click on the date, but he does not at that date.

  Other browsers such as Chrome and Internet Explorer work fine. It just goes straight to the date I click.

  <"rel = 'nofollow' > http://demo3.onlinecourtreservations.com/Reservations.asp > demo version"

  <"rel = 'nofollow' > http://mum.onlinecourtreservations.com/Reservations.asp > our trial version."

  Here's what I sent to the developer and his answer is below.

  My Question: When you use the calendar for date selection tool, I noticed that it will not to the date on the calendar that I click. I can navigate using the arrows of day view and the view arrows week next to the icon of calendar very well.

  DEVELOPER RESPONSE: The calendar tool is based on javascript, so the security of your browser must allow scripts. To do this, the simplest method is to add your site to the "trusted sites" on your browser.

  The steps I've tried:
  1. the reset of the functionality of Firefox
  2. clear all history
  3. start in Safe Mode
  4. check to make sure that javaScript is enabled and it is.

  I wonder why this works fine in Chrome and Internet Explorer and not Firefox.

  Could someone help me solve the problem?

  Thank you.

  If you use this script, you can change it?

  The pop-up tries to submit a form hidden in the main window using a standard, old SEO method. You can correct the script in the pop-up window, or you can create a reference in the main window.

  Method #1:

  Change the code in the popup

  reservation_window.frmCalendar.submit();
  

  for this

  reservation_window.document.forms['frmCalendar'].submit();
  

  Method #2:

  In the main window, create a global script variable that creates the missing reference:

  window.frmCalendar = document.forms['frmCalendar'];
  

  Once solve you this problem, there is a new number. Web site empty, and when you view the source, you see that there is a problem with one of the hidden form parameters.

  Microsoft VBScript runtime error '800a000d'
  Type mismatch: 'CInt'
  /demo/common/reservationssheet/script.asp, line 25
  

  Since it is on the server, I don't know what goes wrong, but the script apparently don't deal well with a time value start missing. For what it's worth, I get the same error in IE8.

• iBooks problem syncing between iPhone, iPad and MacBook Pro

  I have different PDF files on each of the 3 devices; I need them to be synchronized for all the pdf files exist on iBooks for 3 devices. but this isn't the case!

  I heard that synchronization automatically will take place during the activation of the option 'synchronize collection' of form parameters-> iBooks... synchronization isn't the case; can you support?

  After talking with Apple support team; Looks like there is no way to make this kind of synchronization between the various Apple devices pdf!

  they were advised to use the Cloud to add these files and therefore they would be available on different devices.

  still many limitations exist Apple!

• How to get to the settings, DATA from the old HARD drive to new Tecra A10

  My 'old' TECRA A2"refused to fly (fell on the desk)... Screen and grapfic external duty!
  But the HARD drive is still OK and works via an external USB HD adapter to my other PC.

  Can read all the files in the root directory,
  * can NOT read only password protected those *:
  means all files * DOCS and SETTINGS below *.

  My password old route was:
  PW to START WIN XP
  OUTLOOK 2003 via the backup.pst PW

  Bought a new A10 TECTRA...

  HOW can I get the form parameters of DATA etc., my old HDD via USB in my new TECRA A10?

  ANY Suggestion?

  Hello!

  As far as I know that you must add the Group everyone in the folder options. Right-click on the folder-online security-online advanced-online (effective) permissions
  There, you must add the user to the other laptop or for example all users. Then it should work.
  I had this problem for 1 or 2 years and it worked for me.

  A friend of mine told me that he was able to copy the data to a Linux system. You can start form a Linux boot CD/DVD, and then copy the data on the other PC.

  Welcome them

• E-mail settings blackBerry Smartphones Send for smartphone via service messages?

  Nice day

  Is it possible to send email to a blackberry phone settings via a form of service for the user to phone message doesn't have to configure it manually?

  We recently had to reinstall our Exchange Server and are now having to modify the e-mail settings on all our employees members of the phone, however, some of these members of staff are not in the same city that I.T. support and that the staff are not very literate computer/smartphone members, it will be difficult for us to guide them on how to change the e-mail settings especially if Autodiscover does not report the settings correctly on the phone and domain/server settings must be entered manually.

  A member of staff in particular, has a Blackberry curve 9300.

  Any suggestion will be appreciated as we would prefer, as well as in the future, be able to update phones with the necissary through a form parameters any service message rather than error prone manual intervention.

  Concerning

  André T. Dreyer

  OK... so the answer is, well, maybe. It will require compromises your safety ethic.

  A way of doing what you want to connect in the BIS users account on their Web of BIS carrier site and configure the email account it... the fact, of course, would require you to know the credentials of BIS users. Of course, that would also require that the carrier does have such a site... not all do.

  Another way would ring up the carrier users the identity of the user and the carrier agent to configure the e-mail account.

  If the employer provides the user devices such as service plan, then I guess the compromise of security required is lower because, technically, two belong to the company, not the user. But, if what are BYOD devices and/or the carrier account does she belong to the employer, then you'd be in essence hack on behalf of users to achieve.

  Good luck!

• OPS Page generated Params when browsing

  Team,
  
  During the course for an OAF page of responsibility.
  
  Here's the URL in the address bar.
  
  http://dev1.xxClient:8007/OA_HTML/OA.jsp?page=/xxClientl/WebUI/XXSearchPG & Searchtypes = DTL & _tI = 320996487 & language_code = US & & OAFMID = 91523 & OAPB = _OAFMID & OAPC = 42 & OAS = m-Nc25_ZHFy7T56C_DmVeQ...
  
  My question is:
  
  How does the following are generated, and have we not all methods to get these values?
  
  * OAPB, OAS, OAFMID, _ti *.
  
  Concerning
  Sridhar

  Hi Sridhar,
  Certain parameters are automatically generated, but few of them are defined as the parameters in the function definition.
  If this is the starting point of your page, check the definition of function.

  And for your question: do you have methods to get these values?

  You want to get the values in your controller?

  If you turn on tracking in the level of education and race, we could see the full trace and
  all parameters, make sure you get these values in your pageContext params

  Get all the pagecontext form parameters using enumeration
  ------------------------------------------------------------
  to import java.util.Enumeration;
  --..
  Enumeration enum = pageContext.getParameterNames ();
  While (enums.hasMoreElements ())
  {
  String paramName = enums.nextElement (m:System.NET.SocketAddress.ToString ());
  System.out.println ("Param name" paramName "---> Param values" + pageContext.getParameter (paramName));
  }

  Thank you

  With respect,
  Kali.
  OSSi.

• Prevent the event of action af:fileDownloadActionListener

  # Background
  
  The following problem is also described in the: http://stackoverflow.com/questions/14638103/prevent-affiledownloadactionlistener-action-event
  
  Using JDeveloper 11.1.2.3 to create a report download button using 'fileDownloadActionListener' as follows:

      <af:commandButton text="Run Report" id="submitReport">
        <af:fileDownloadActionListener method="#{reportBean.run}"/>
      </af:commandButton>

  At the top of the JSF page is the following:
  

      <f:view afterPhase="#{validationBean.afterPhase}" ...>
        ...
          <af:form id="f1">
            <f:event listener="#{validationBean.postValidate}" type="postValidate"/>

  The idea is that the bean Validation allows you to capture validation issues as follows:
  

      public void afterPhase(javax.faces.event.PhaseEvent phaseEvent) {
        if (phaseEvent.getPhaseId() == PhaseId.RENDER_RESPONSE) {
          FacesContext context = phaseEvent.getFacesContext();
          FacesMessage.Severity severity = context.getMaximumSeverity();
      
          if (isSevereError(severity)) {
            context.getExternalContext().getSessionMap().put(ERROR_FLAG_NAME, true);
          }
        }
      }

  This works as expected. When the user presses the button, but the form has an error, the session variable "validationError" is set to 'true '. This should allow the frame avoid the generated report if the form parameters have errors.
  
  # Problem
  
  The session variable "validationError" is used by the run method of the bean the report as follows:
  

        public void run(FacesContext facesContext, OutputStream outputStream) {
          Object error = facesContext.getExternalContext().getSessionMap().get( ERROR_FLAG_NAME );
          
          if( error != null && error != Boolean.TRUE ) {
            Report report = null;
      
            try {
              report = getReport();
              report.setOutputStream(outputStream);
              configure(report.getParameters());
              report.run();
            } catch (Exception e) {
              if (report != null && facesContext != null) {
                report.publish(e);
              }
            }
          }
          else {
            facesContext.getExternalContext().getSessionMap().remove( ERROR_FLAG_NAME );
            facesContext.renderResponse();
          }
        }

  When there is a validation on the page, the "facesContext.renderResponse ()" error; the code is executed, but the resulting web page is empty. Any exceptions are documented. No errors are generated.
  
  # Question
  
  One way to avoid this situation uses a button hidden, customized Java and JavaScript, as described in the following pages:
  
  -http://jobinesh.blogspot.ca/2010/01/customizing-execution-of-to-validate.html
  -http://tompeez.wordpress.com/2011/07/14/validate-data-before-export-via-afexportcollectionactionlistener-or-affiledownloadactionlistener/
  
  However, this mechanism is complicated. The solution I have in mind will work if the page can be rendered as usual.
  
  How do force you the page to render once triggered by the event "af:fileDownloadActionListener"?
  
  Thank you!

  Dave,

  using a hidden button is the only option you have available today. I will drop an ER that fires an event to the listener fileDownload (kind of prior download) should allow you to cancel it by calling make response. As said, this does not yet exist and the hidden button is the option you have available (note that the download file tag is a tag of customer behavior and not a user interface component full, it is why there is no way yet to interrupt execution.

  Frank

• APEX and EBS 12.1.1 using jsp

  I'm trying to follow http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf to set up a link from APPS to APEX using jsp route and end up with an error. I can see why but don't know how to fix:
  
  Here's what I have so far:
  
  1 - apex (4.0.2.00.07) installed next to the Oracle APPS 12.1.1
  2 - apex configured with the latest version of Weblogic
  3 - Creating Apex simple report as a public page requiring not just any journal in info
  4 - the report is available on the page framework APPS using personalization and after URL: http://myserver.com:7021/apex/f? p = 104:1:
  5 - LaunchApex.jsp created and compiled without error in document - removed /pls/ to match with the url above.
  6 created the custom system - level = http://myserver.com:7021 site profile.
  7 created the function using jsp SSWA, CALL HTML = LaunchApex.jsp [is it enough?], forms/parameters = [left blank - no effect if I add something here]-don't know where to place the settings id numbers and request page?
  8. added the function as a set additional menu item in place the user with responsibilities
  9 - when click on the newly added item, I see the following URL: http://myserver.com:7021/apex/f? p = NONE: 1::APPS: which clearly lacks the id of the application (104) and page number (1).
  
  As well as the following error:
  
  While waiting for the cookie p_company or wwv_flow_company to contain the id of the owner of the application security group.
  Error ERR-7620 could not determine the workspace for application ().
  
  
  what I'm missing here?
  
  Thanks for the help.

  Yes, you're missing compensation of the id of the application.
  Try this in the HTML CALL: LaunchApex.jsp? app = 104 & page = 1

• How to insert a pdf or jpeg image into a column of type blob of a table

  How to insert a pdf or jpeg image into a column of type blob of a table

  Hello
  Try this

  Loading an image into a BLOB column and showing through OAS
  -------------------------------------------------------------

  The steps are:

  Step 1.
  -------

  Create a table to store BLOBs:

  create BLOB table objects
  (id VARCHAR2 (255),)
  blob_col blob
  );

  Step 2.
  -------

  Create a logical directory in the database to the physical file system:

  create or replace the MY_FILES directory as "c:\images";

  Step 3.
  -------

  Create a procedure to load the BLOB from the file system by using the logic
  Directory. Gif 'aria.gif' must exist in c:\images.

  create or replace procedure insert_img as
  f_lob bfile.
  b_lob blob.
  Start
  insert into BLOB ("MyGif", empty_blob()) values
  return blob_col in b_lob;

  f_lob: = bfilename ("MY_FILES', 'aria.gif');
  DBMS_LOB. FileOpen (f_lob, dbms_lob.file_readonly);
  DBMS_LOB. LoadFromFile (b_lob, f_lob, dbms_lob.getlength (f_lob));
  DBMS_LOB. FileClose (f_lob);
  commit;
  end;
  /

  Step 4.
  -------

  Create a procedure that is called via Oracle Application Server to display the
  image.

  create or replace procedure get_img as
  vblob blob.
  raw buffer (32000);
  buffer_size integer: = 32000;
  offset of an integer: = 1;
  length of number;
  Start
  owa_util.mime_header('image/gif');
  Select blob_col from vblob of blobs where id = 'MyGif. "
  Length: = dbms_lob.getlength (vblob);
  While offset< length="">
  DBMS_LOB. Read (vblob, buffer_size, offset, buffer);
  HTP. PRN (utl_raw.cast_to_varchar2 (buffer));
  offset: = offset + buffer_size;
  end loop;
  exception
  while others then
  HTP.p (SQLERRM);
  end;
  /

  Step 5.
  -------

  Use the PL/SQL cartridge to call the get_img procedure

  OR

  Create this procedure in function and call it your PL/SQL code for
  correctly place the images on your HTML page through the PL/SQL Toolbox.

  from a html form

  1. create an HTML form where the image will be. You too
  need the file MIME type.
  2. create a procedure receives the form parameters. The file field will be a Varchar2
  parameter, because you receive the path of the image is not the image itself.
  3 insert the image file into the table by using 'Create a directory NAME as chemin_image' and
  Then use ' insert into the TABLE (row, BLOB_OBJECT, MIME_OBJECT) values (sequence.nextval, '.
  EMPTY_BLOB() 'GIF' or 'JPEG') BLOB_OBJECT, in the variable_blob, back
  variable_consecutive.
  4 load the file into the table using:
  DBMS_LOB. LoadFromFile (variable_blob, variable_file_name, dbms_lob.getlength (variable_file_name));
  DBMS_LOB. FileClose (variable_file_name);
  engage.

  Kind regards
  Simma...

• Send XML data for the processing of credit cards

  I'm implementing the presentation of an XML document in my Web site for the processing of credit cards using the API from my dealer.
  
  This is the format that I use for my application. For some reason, I get an error message saying "invalid request Format. XML request is not correct or the application is incomplete. »
  
  I know that the XML itself is correct, as I submit directly through the URL string in the browser and it works OK.
  
  Here's what I do:
  
  < cfsavecontent variable = 'strXML' >
  
  <!-NOTE: test data below - not my actual data-->
  < txn >
  < > 123456 ssl_merchant_ID < / ssl_merchant_ID >
  < > 123456 ssl_user_id < / ssl_user_id >
  < ssl_pin > V6NJ3A < / ssl_pin >
  < ssl_transaction_type > ccsale < / ssl_transaction_type >
  < ssl_card_number > 1111111111111111 < / ssl_card_number >
  < ssl_exp_date > 1210 < / ssl_exp_date >
  < ssl_amount > 2.34 < / ssl_amount >
  < ssl_salestax > 0.00 < / ssl_salestax >
  < ssl_cvv2cvc2_indicator > 1 < / ssl_cvv2cvc2_indicator >
  < ssl_cvv2cvc2 > 321 < / ssl_cvv2cvc2 >
  < 1234 > ssl_invoice_number < / ssl_invoice_number >
  < ssl_customer_code > 1111 < / ssl_customer_code >
  client < ssl_first_name > < / ssl_first_name >
  name of < ssl_last_name > < / ssl_last_name >
  < ssl_avs_address > 1234 main st. < / ssl_avs_address >
  the apt b < ssl_address2 > < / ssl_address2 >
  < ssl_city > any city < / ssl_city >
  < ssl_state > ST < / ssl_state >
  < ssl_avs_zip > 55555 < / ssl_avs_zip >
  < ssl_phone > 555-555-5555 < / ssl_phone >
  < ssl_email > [email protected] < / ssl_email >
  < / txn >
  
  < / cfsavecontent >
  
  < cfhttp url = "https://www.myvirtualmerchant.com/VirtualMerchant/processxml.do?xmldata=" method = "post" >
  < cfhttpparam type = "XML" value = "trim (strXML)" >
  < / cfhttp >
  
  < cfoutput > #cfhttp. FileContent # < / cfoutput >
  
  
  
  Can someone tell me what I am doing wrong?
  
  (The developer's guide is available here):
  
  https://www.myvirtualmerchant.com/VirtualMerchant/download/developerGuide.PDF)
  
  Thank you!

  Seek to deepen your original message.

  You're saying this...
  "I know that the XML itself is correct, I can submit directly through
  the URL string in the browser and it works well. »

  Who said to me that you are using URL get parameters not post form
  parameters. Also you do not have the name of the url parameter in the url
  string, unless you put the value one. If you use the
  Tag, it must contain the name. Finally you seem
  Miss the sharps.

  Give this or something like this a try.

  <>
  URL = "https://www.myvirtualmerchant.com/VirtualMerchant/processxml.do".
  method = "get" >