Format hard drive and reinstall windows xp

Similar Questions

• Can I format HARD drive and reinstall Windows 7 on the Qosmio F60 without CD

  I think my hard drive is faulty on my F60 Quosmio so I want to reformat the hard drive to see if that will fix it. But I don't have the original packaging and the information with me at the moment so I don't know if it came with a windows 7 CD or not. Whatever it is, I don't have the CD.

  I found on the net that most manufacturer who deliver without CD include a "recovery partition" or "factory image partition" which you can access during startup. Anyone know if the F60 Quosmio comes with a CD or if she has this recovery partition or partition image factory? Or do you know if there is a way I can check if my computer is it?

  If you have more information about the formatting of the hard drive and reinstall windows 7 without the CD please let me know.

  Thank you.

  The laptop came with a Windows disc, because there is a Toshiba recovery disc Creator called tool which create the recovery disk.

  The recovery partition was available and it allows you to recover the laptop without the use of the recovery disk, but it does not work if the HARD drive has failed.

  Here's a nice HowTo on HARD drive recovery
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  So, if you n t have a recovery disc and can not recovery Notepad using HARD drive recovery, then you have two options:
  -You will order a new recovery disk
  -You must install Windows operating system using a disc of Microsoft

• I would format my hard drive and reinstall Windows, but have more media. How do I replace it?

  I lent my XP Pro CD to a friend and need to replace

  I want to format my hard drive and reinstall Windows.  I gave my drive to a friend and did not have the installation CD...

  I want to format my hard drive and reinstall Windows.  I gave my drive to a friend and did not have the installation CD...

  Talk to your 'friend', not us.

  haha

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• I own Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to

  I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.

  Help, please

  Post edited by: Bil Colthurst

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server

• Satellite A660 - 1 H 7 - How to replace the hard drive and reinstall Windows 7

  Hi all

  I'm frequently getting warnings about the health of my hard drive and while it is not catastrophic, I've been umming and ahhing (?) on the replacement of an SSD in the future anyway so thought it was a good excuse.

  My real question is, what the procedure is perfect (or greater) for Windows 7 migration to the new drive? I think I want a default installation because this laptop has had so many programs installed/uninstalled it's probably a bit of a mess.

  I have created 4 recovery DVD disks but have seen on the net they don't work and that download an ISO with the vignette product key can work either. I can't really afford interruption much (or all) so I try to do it safely and securely as possible!

  Any help would be greatly appreciated and thanks for your time,.
  Scott

  > what the procedure is perfect (or greater) for Windows 7 migration to the new drive?

  I think the fastest solution is the use of the recovery disk that you created using the recovery media creator Toshiba. I don't see a reason why it should not work as part of a new SSD.

  I also have another recommendation.
  You can create an image of your current HDD (partitions) using internal Windows 7 Backup and restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  After using the recovery disk, you can use the created image to get the current status.

• How can I replace a compaq presario C762NR hard drive and reinstall windows?

  My friend brought me his computer and said that he would not start. I tried to boot into safe mode and normal mode and it would not work. It would simply flash a blue screen and restart. After you run a test it is determined that the hard drive has failed. A new laptop is not an option at this point.

  I bought a new hard drive and I ordered the HP recovery disk. What are the appropriate steps to complete this replacement?

  The computer is out of warranty and so is the hard drive. The computer has Windows Vista on it. The failed hard drive was 160 gb, 2.5 ", SATA 1.5 gb/s, 8 MB cache. The news is the same except that it is SATA 3 gb/s.

  This is my first time, replacing a hard drive. I'm confident about it, but I want to just make sure I do it correctly.

  Hello

  All you have to do after replacing the HARD drive is the following.

  Start Notepad and open the CD/DVD drive.  Insert the first disc of recovery.  Hold the power button until the laptop stops.  Press the power button to start the laptop that should now boot from the recovery disk and start the recovery process.

  Kind regards

  DP - K

• Cannot start Windows XP. How to format my hard drive and reinstall Windows XP?

  Unable to log on to Windows XP and continues to repeat the initialization. May I know what is happening to my system?

  Dear Sir/Madam,

  I can not even log in to Windows XP, this is why I am not able to access the system restore. Can I know how can I format my hard drive because I can't find all a command 'format '. The system continues to repeat opening a Windows XP session but failed. Help requested to provide your professional advice & solution.

  Yours sincerely,

  Davidaries

  Hello DavidariesGoh

  Reinstall Windows XP
  To reinstall Windows XP, try either of the following methods. If the first method does not work, try the second.
  
  Note You can disconnect from the Internet during the installation. This helps to protect you against malicious users. Method 1: Start the reinstallation of Windows XP to reinstall Windows XP by using the Windows XP CD, follow these steps:

  1. Start your computer.
  2. Insert the Windows XP CD in the CD drive or DVD drive of your computer.
  3. In the Welcome to Windows XP page, click Install Windows XP.
  4. On the welcome page in Windows installation, click upgrade (recommended) in the Type of Installationbox (if it is not already started), and then click Next.
  5. On the license agreement page, click I accept this agreement, and then click Next.
  6. On the your product key page, type the 25-character product key in the product key boxes, and then click Next.
  7. Get the updated Setup files page, select the option you want, and then click Next.
  8. Follow the instructions that appear on the screen to reinstall Windows XP.

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or if the reinstallation did not finish, try Method 2. Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD Note if Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact the manufacturer of your computer to make sure that you have the CD for a repair installation.

  To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:

  1. Insert the Windows XP CD in your computer's DVD or CD drive, and then restart your computer.
  2. When you receive the message "Press any key to boot from CD" on the screen, press a key to start your computer from the Windows XP CD.
  3. The following message on the Welcome to Setup screen is displayed:
     This part of the Setup program prepares Microsoft Windows XP to your computer: to set up Windows XP now, press ENTER. To repair an installation of Windows XP using the Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
  4. Press ENTER to set up Windows XP.
  5. On the Windows XP licensing agreement screen, press F8 to accept the license agreement.
  6. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  7. Follow the instructions that appear on the screen to reinstall Windows XP. After repairing Windows XP, you may have to reactivate your copy of Windows XP. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     310064 how to fix Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you can ask someone you know for help. Or, you can contact Microsoft Support to help you resolve this problem.

  Back to top

  After you have reinstalled Windows XP after completing reinstallation, perform the following final tasks.

  Note You can also turn on the firewall in Internet Explorer. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  283673 how to activate or turn off the firewall in Windows XP

  Reinstall Windows XP Service Pack 2, Windows XP Service Pack 2 (SP2) has been installed on your computer until you have reinstalled Windows XP, you must reinstall SP2. If you do not have already reinstall SP2 with Windows XP in the previous section, use one of the following methods to reinstall SP2 now. To order Windows Service Pack 2 on CD, visit the following Microsoft Web site:

  http://www.Microsoft.com/windowsxp/downloads/updates/SP2/cdorder/en_us/default.mspx

  For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  322389 how to obtain the latest Windows XP service pack

  Reinstall all Windows updates after reinstalling Windows XP, you must reinstall all updates to Windows also. To reinstall Windows updates, visit the Microsoft Web site at the following address:

  http://update.Microsoft.com

• After formatting hard drive and reload windows xp does not update some crashes

  Hello
  My friend has problems reloading windows xp after that she formatted his hard drive virus inprivate. It seems to install ok but then when you try to get the updates, it can do a little and then hang or just then find crash. then finally last night it wouldn't come back on just says installation is not complete. any ideas thanks everybody

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Replacing hard drive and reinstall Windows 8

  Hello

  I just did an update on my PC from Vista 64 Home Premium to Windows 8 Professional, using the upgrade wizard. I got a note from my product key.

  8 Windows tells me that my HD is reporting failures, which seems likely because I recently had some problems with it (sounds strange, occasional freezes). This is why I would like to replace the hard drive before it completely fails.

  If I buy and adapt to a new hard drive, how do I go about installing Windows 8 on it with the license, I just bought? Can I create a boot disk before I have remove the old drive? Or do I have to reinstall Vista from the original disks and rerun the upgrade?

  Thank you!

  Hi Fred,.

  It is regrettable that the hard drive is broken, you can install Windows 8 on the new hard drive. You can see the following article from Microsoft Help to download an ISO of Windows 8 image by using the same product key.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  If you encounter any problem with activation, then you will need to contact the activation team for assistance.

  http://support.Microsoft.com/kb/950929/en-us

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers

  Hello

  My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP before changing my HARD drive + tips on replacing drive HARD would be also useful. There is no service HP here so I have to do it myself.

  Thank you, I finally solved the problem by creating a partition under Advanced options and recovery of Windows drive, and you select Reset. Search for main windows and use Windows system image did not work with the version of Windows OEM.

• I have a dell latitude 610 laptop that I had to wipe the hard drive and reinstall windows xp pro and it does not have all the internet apps

  When I reinstalled win xp pro it didn't install any help net drivers that I can't get on internet

  If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

  Download network drivers for Internet

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• How do I reformat my hard drive and reinstall Windows Vista on my computer?

  original title: how to reprogram my computer

  How to reprogram my computer

  Hello

  do you mean reinstalling vista?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Change my hard drive and reinstall windows 7 Professional from my laptop?

  My laptop came pre-installed with Windows 7 Professional and now I want to change my hard drive because it becomes too small. How can I install windows 7 Professional on my new drive hard if I don't have the disks in Windows 7 Professional? Thaks for your help.
  Joseph

  See the following topics:

  How pass Windows 7 to a bigger Hard Disk : Notebooks.com

• Windows activation - new hard drive and reinstalled Windows, but will not work with the product key

  Hi all

  My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.

  Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?

  Thank you

  Richard

  Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!

  Thank you

  Richard