format of exported data
Hello
I am trying to export a table 2D containing a specified number of rows and 4 columns of Labview in an excel file. The problem I have is that the table format does not correctly export to Excel. What should be the fourth column of each line ends up below the second column of the row. Basically, I have this:
Transitional 1 Max value Min value
Pass/fail
Transient 2 etc...
And I want this:
Transitional 1 Max Min value success or failure value
Transient 2 etc.
I had this problem before getting the min value to the correct place, but the fix I used for this does not work for this because he must go through the node of the range. I tried the delimiters and many other things but can't seem to break.
Specifically my program takes readings of a scope (max and min value) a certain number of times specified by the user. Each reading is checked to make sure there is a certain min and max value and says pass or fail. Looking at the indicator table on the front panel, that it appears the way I want, but when he exports it it is as stated above. I use Labview 2012 and Tektronix scopes.
Thank you for your help.
Textronix scopes use an end of line character in endpoint. So the data in the VISA reading have an end of LIFE at the end. Use a Trim to remove these just after reading VISA.
Tags: NI Software
Similar Questions
-
export data wave graph problem
Hi all!
I have a problem with my table of waveform:
The length of the history of the chart I updated 5 X 24 X 60 X 60 = 432 000 comments. I draw a new point in all the 1 minute, so that I can preview as the last 5 days. The problem is, when I'm just trying to export to Excel, the data for the chart, the data are not in the order time (if I export the data to the Clipboard, it is all the same). The data starts with the second day. And Yes, before I export data, the x-axis are configured to be autoscaled, so I don't see 5 days together data curves. But after export, in the table opening Excel (2010 office, LabView 2011, silver chart) the data are really mixed upward...
Anyway, the workaround is simple: 2 clicks in Excel and it puts the data in order, but I'm curious to know why it happens... I guess I'm doing something wrong with the berries of waveform of construction?
Is this a bug?
Thanks in advance!
PS. : I have attached a graphic exported to jpg format what I see, and excel table with "mixed up" sequence of data, as well as the Subvi, that I use to generate and send the three points of the chart made every minute.
Hey,.
as far as I know, it was a change in the interface ActiveX of Office 2007 to Office 2010.
You wouldn't have this bug in Exel 2007.
Try to use the the VI 'Export waveforms to spreadsheet' or if you use a PDM file.
Oxford
Sebastian
-
Data loading 10415 failed when you export data to Essbase EPMA app
Hi Experts,
Can someone help me solve this issue I am facing FDM 11.1.2.3
I'm trying to export data to the application Essbase EPMA of FDM
import and validate worked fine, but when I click on export its failure
I am getting below error
Failed to load data
10415 - data loading errors
Proceedings of Essbase API: [EssImport] threw code: 1003029 - 1003029
Encountered in the spreadsheet file (C:\Oracle\Middleware\User_Projects\epmsystem1\EssbaseServer\essbaseserver1\app\Volv formatting
I have Diemsion members
1 account
2 entity
3 scenario
4 year
5. period
6 regions
7 products
8 acquisitions
9 Servicesline
10 Functionalunit
When I click on the button export its failure
I checked 1 thing more inception. DAT file but this file is empty
Thanks in advance
Hello
Even I was facing the similar problem
In my case I am loading data to the Application of conventional planning. When all the dimension members are ignored in the mapping for the combination, you try to load the data, and when you click Export, you will get the same message. . DAT empty file is created
You can check this
Thank you
Praveen
-
exporting data to Excel using XSSFWorkbook
Hi everyone export data to Excel using XSSFWorkbook
having error javax.el.ELException: means: lots of Java space now I need to change my code to BigGridDemo.java
http://www.Docjar.org/HTML/API/org/Apache/POI/xssf/userModel/examples/BigGridDemo.Java.html
http://Apache-POI.1045710.N5.Nabble.com/HSSF-and-XSSF-memory-usage-some-numbers-td4312784.html
How can I change my code for BigGridDemo.java
This is my code
import com.bea.common.security.xacml.context.Result;
import com.sun.jmx.snmp.Timestamp;
to import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.OutputStream;
import java.util.HashMap;
to import java.util.Iterator;
import java.util.Map;
Org.apache.poi.ss.usermodel import. *;
Import javax.faces.context.FacesContext;
Import org.apache.poi.hssf.usermodel.HSSFCell;
Import org.apache.poi.hssf.usermodel.HSSFCellStyle;
Import org.apache.poi.hssf.usermodel.HSSFDataFormat;
Import org.apache.poi.hssf.usermodel.HSSFRow;
Import org.apache.poi.hssf.usermodel.HSSFSheet;
Import org.apache.poi.hssf.usermodel.HSSFWorkbook;
Org.apache.poi import. *;
Import org.apache.poi.hssf.util.HSSFColor;
Import oracle.adf.model.BindingContainer;
Import oracle.adf.model.BindingContext;
Import oracle.adf.model.binding.DCBindingContainer;
Import oracle.adf.model.binding.DCIteratorBinding;
Import oracle.adf.view.rich.component.rich.data.RichTable;
Import org.apache.poi.POIDocument;
import org.apache.poi
Import org.apache.poi.xssf.usermodel.XSSFWorkbook;
Org.apache.poi.hssf.usermodel import. *;
Import oracle.jbo.Row;
Import oracle.jbo.RowSetIterator;
Import oracle.jbo.ViewObject;
Import org.apache.myfaces.trinidad.model.CollectionModel;
Import org.apache.myfaces.trinidad.model.RowKeySet;
Import org.apache.myfaces.trinidad.model.RowKeySetImpl;
Import org.apache.poi.hssf.usermodel.HSSFRichTextString;
Import org.apache.poi.ss.usermodel.Workbook;
Import org.apache.poi.POIXMLDocumentPart;
Import org.apache.poi.POIXMLDocument;
Import org.apache.poi.hssf.usermodel.HSSFRow;
Import org.apache.poi.hssf.usermodel.HSSFSheet;
Import org.apache.poi.hssf.usermodel.HSSFWorkbook;
public class PoiBean {}
RicheTableau CustomTable;
public PoiBean() {}
}
public static BindingContainer {} getBindingContainer()
return (BindingContainer) JSFUtils.resolveExpression("#{bindings}");
return (BindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
}
public static DCBindingContainer getDCBindingContainer() {}
return (DCBindingContainer) getBindingContainer ();
}
' Public Sub generateExcel (FacesContext facesContext, OutputStream outputStream) throws IOException {}
try {}
Workbook = new XSSFWorkbook(); or new HSSFWorkbook();
Spreadsheet sheet = workbook.createSheet("Fonts");
Get all lines of an iterator
/////////////////////////////////////////////////////////////////////////////////////////////////////
Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("CustomClientView1Iterator");
Line rowss = worksheet.createRow (0);
ViewObject yourVO = dcIteratorBindings.getViewObject ();
Get all the lines of a ViewObject
RowSetIterator iter = yourVO.createRowSetIterator ("CustomClient");
ITER. Reset();
int rowCounter = 0;
While (iter.hasNext ()) {}
A cell = null;
line oracle.jbo.Row = iter.next ();
print header on the first line in excel
If (rowCounter == 0) {}
rowss = worksheet.createRow (rowCounter);
int cellCounter = 0;
{for (String colName: {row.getAttributeNames ())}
cell = rowss.createCell (cellCounter);
cellA1.setCellValue (colName);
cellCounter ++;
}
}
print the data from the second row in excel
rowCounter ++;
//////////////////////////////////////////////////////////////
short j = 0;
int cellCounter = 0;
excelrow = (HSSFRow) worksheet.createRow ((int) i);
rowss = worksheet.createRow (rowCounter);
{for (String colName: {row.getAttributeNames ())}
System.out.println ("Hello" + row.getAttribute (colName));
System.out.println ("Hello" + name of column);
cell = rowss.createCell (cellCounter);
rowCounter ++;
cell.setCellValue (new HSSFRichTextString (rs.getS));
{if (! isBlank (colname))}
If (colName.equalsIgnoreCase ("CcnCode")) {}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
System.out.println ("column name" + colName + "row.getAttribute (colName) m:System.NET.SocketAddress.ToString ()" + row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
}
}
logic for the cell formatting
ElseIf (colName.equalsIgnoreCase ("CcnName")) {}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
}
make double if you want to convert as a result
ElseIf (colName.equalsIgnoreCase ("CcnRegDate")) {}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
}
ElseIf (colName.equalsIgnoreCase ("CcnCancelDate")) {}
{if (null! = Row.GetAttribute (colname))}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
}
} ElseIf (colName.equalsIgnoreCase ("CcnUndertaking")) {}
{if (null! = Row.GetAttribute (colname))}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
}
}
ElseIf (colName.equalsIgnoreCase ("CcnCode8")) {}
{if (null! = Row.GetAttribute (colname))}
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
} }
on the other
cell.setCellValue (row.getAttribute (colName) m:System.NET.SocketAddress.ToString ());
cellCounter ++;
}
worksheet.createFreezePane (0, 1, 0, 1);
}
Workbook.Write (OutputStream);
outputStream.flush ();
}
//}
catch (Exception e) {}
e.printStackTrace ();
}
}
The demo "big grid" is obsolete and has been replaced by SXSSF, which is compatible with XSSF (seehttp://poi.apache.org/spreadsheet/how-to.html#sxssfthe new Halloween Document) API.
Theoretically, all you need to do is replace "new XSSFWorkbook()" by "new org.apache.poi.xssf.streaming.SXSSFWorkbook ()" in your program.
You better post any specific questions of POI on the forum of the user Apache POI (see mailing lists , Apache POI)
Kind regards
Alex
-
How to export data from the table with the colouring of cells according to value.
Hi all
I use jdeveloper 11.1.1.6
I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?
You can find us apache POI-http://poi.apache.org/
See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html
-
Problem with export data from an application and importing data into another application
Hello
I need to give a stream to an application (target) of one of the other application (source) of data. So what I did is I exported the data necessary for the application target using the DATAEXPORT function in text files and you now want to import data in text files in the application of the source using rules files.
I'm trying to create files for each exported text file separate compilation, but I'm not able to do this successfully.
I traced all members of the source to the target application, but still there is something wrong is going on is to not let the successful import or do not allow that data to go to the right places.
There all the specifications, while using this function DATAEXPORT as format or the kind of DATAEXPORTOPTIONS that I use to make it work?
Here is the first part of my script to calc. For all other data I wanted to export that I wrote similar statements by simply setting on individual members.
SET DATAEXPORTOPTIONS
{
DATAEXPORTLEVEL ALL;
DATAEXPORTCOLFORMAT ON;
DATAEXPORTOVERWRITEFILE ON;
};
DIFFICULTY ("ST", "BV", "SSV", "ASV", "ESV", "W", "HSP_InputValue", "SÜSS", "TBSD", "ABU", "AC", "LB", "LT", "VAP", "Real", "FY11", @REMOVE (@LEVMBRS (period, 0), @LIST (BegBalance)));
DATAEXPORT 'File' ',' '...\export Files\D3.txt ';
ENDFIX;
Please let me know your opinion on this. I really need help with that.
~ HervéSo, you have 12 periods through the columns of the export data?
If so, you must assign each column of data at a time. The data column property is used only when you have completely defined the dimensions either through other fields or other areas and the header and the left point only possible is data. This does not work when you have several columns of data that you find, just so assign the right period; doing this means there is no column of data .
Kind regards
Cameron Lackpour
-
Hello. Is it possible to export data from a table in Oracle using SQL Loader? If Yes, can you tell a good examples?
Hello
Hello. Is it possible to export data from a table in Oracle using SQL Loader?
No, with SQL * Loader, you can load data from external files into tables not export.
coil c:\temp\empdata.txt
sqlplusabc.sql (assumes that abc.sql runs select * from emp)
spool offIt cannot work like this, because the declaration of the COIL is not recognized outside the SQL * Plus the term.
But, you can include the statement of the COIL in abc.sql like this:
spool c:\temp\empdata.txt select * from emp; spool off
Then, you just have to run the SQL script as follows:
sqlplus
@abc.sql However, I advise you to use Oracle SQL Developer, this is a free tool and with it you can export a Table in several types of format (html, xml, csv, xls,...).
Please find attached a link to this tool:
http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/Overview/index.html
Hope this helps.
Best regards
Jean Valentine -
Hello
I'm trying to export essbase data then reload it into the sql table, I to the right, click Export, then choose "All data" and check "Export to the format column", if I get the text file. However, when I try to import into a sql table, it's just a great column.
What is the best way to export data out essbase and then import them into a table in sql, the idea is that I want to just export, for example, budget data, and then import them into sql.
Thank youIf you read my blog, you will see that you can really control the export format except in the designate one of the dense dimensions such as columns. The rest follows the contour. I'll guess that your periods dimension is what is prevalent throughout. While you can not retrieve the columns in the desired order. If it is still a cube of dev, you can add a dense dimension with a single member and use it as your column. It would not affect the performance of the cube, but would affect any charge the rules or you get already.
If you need to format you describe, another suggestion would be to export the format as you see, then put views above it that unions periods to take a single column of data and forcing a month name in it.
If your table looks like the year, scenario, dept, acct, per1, Per2, Per3etc
Then, you could do a view as
Select the year, scenario, dept, Acct, 'Jan', table 1, where 1 is not null
Union
Select the year, scenario, dept, Acct, 'February', Per2 table where Per2is not null
etc. -
Export data to different levels
Hello
I am trying to automate pulling a report out of essbase. The Calc of data export creates a Level0 txt file that is difficult to validate against one online report from oracle. I'm pretty much wanting to pull all top-level except accounts whiich dimension must be at level 0, I can compare the balance in Oracle Hyperion. This must be an automated solution and I will use VBScript to run Oracle sql queries. Is it possible to pull a report at different levels in essbase maxl or any other form? I'm really not familiar with Hyperion reports. Is it possible to run a report of Hyperion via a script and do produce a txt file?
I really appreciate any information on this and hope someone can help.Out the data is quite simple using a report script. In a script to report unspecified dimensions by default to the top of the dimension, so if that's really all you need (i.e. you have no dimension that do not consolidate the Summit or otherwise should be noted) something as minimalist as...
{NOINDENTGEN}
{SUPPAGEHEADING}
!
.. could actually be sufficient as the report script. Script editor for the report of the Administration Console allows to develop and test the script before trying to automate. Much better control the missing / zero suppression and substition, formatting, etc. is possible. The Builder of the technical documentation section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?rw_commands_chap.htmlTo integrate the report script in automation, you can watch the execution of the script of report using the MaxL "data export" command I'm assuming you can afford in your scenario. "export data" allow us you to specify a file for the output .txt. For more information, the MaxL in the technical reference section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_chap.html.
-
Developer SQL 2.1.0.63.73 exports DATE as a TIMESTAMP
In my view, that it is a bug. When I export a table to a XLS file, the values in the DATE columns are saved as if they were TIMESTAMP:
for example. December 31 09 12:00:00 AM exported as 31 December 09 12.00.00.000000000 AM
Not really a huge deal until you try to import, in which case you cannot import a TIMESTAMP into a DATE column. First of all, you will get an error from the Miss AM / A.M.. or AM/PM. You cannot explicitly specify the date format then import either as rejects Oracle it since it is not supported. The proper way is to cast to a date, but you can do this through the import feature.
Nevertheless, I think the export function should export DATEs according to the NLS Date Format settings, but it is not.
If it makes any difference, I use the 64-bit version of Windows of SQL Developer on Windows 7 64 - bit with the Oracle 64-bit client.Hello
Don't know if it's something related to my previous problem.
My SQL Dev gives the correct date format to export to Excel, but fails on an insert exportVerdin, a member of the sql dev team gave this workaround solution that solved my problem
>
You can add the following in the sqldeveloper.conf to ensure that the driver tell not the column of a DATE in the TIMESTAMP column type.AddVMOption - Doracle.jdbc.mapDateToTimestamp = false
>as suggested in this thread
Re: 2.1 EA1: problems with Date type columnsHope this helps,
Buntoro
-
Force SQL Developer 1.5.4 to export data on 1 sheet XLS
Hello.
I use SQL Developer 1.5.4 to export data in XLS format.
The exported file is about 40 MB of wholesale.
When exporting, I noticed that developer SQL divides the data into multiple worksheets, with about 64 001 lines each.
Please, is there a way I could force SQL Developer to have all data on a spreadsheet of singke?
Thank you.I'm just guessing, but I suspect that the 64 000 line limit is so the resulting XLS file can be opened in Excel 2003 or an earlier version. Excel 2003 has a limit of ~ 65 536 (2 ^ 16) rows in a worksheet. Even if you were to export as a text or CSV (separator: tab) file and try to load it into Excel, it could choke and leave once the limit of the worksheet intervened.
Hrsg.:.
-
Question about exporting data from Virtualbench.
Hello
I am new to the forums and VirtualBench and hoped that someone might be able to help.
When I export data from the VirtualBench, I get 4 columns of data for the 2 channels. They are "1 Min", "1Max", "2 Min", "2Max.
Example:
Timestamps (ns)
1 min
1 Max
2 min
Max 2
-3000600000
-0.205761317
0.12345679
-0.013168724
-0.001646091
-2990598000
-0.205761317
0.12345679
-0.013168724
-0.003292181
-2980596000
-0.205761317
0.12345679
-0.013168724
-0.003292181
-2970594000
-0.205761317
0.12345679
-0.013168724
-0.001646091
I don't understand what means min/max. I have not any spread. VirtualBench takes in fact several samples at each point?
Thank you.
In some places, VirtualBench application will automatically the peak of detection equipment.
Peak - detect mode, over-samples scope and returns the minutes and the maximum voltage in each period the sample.
You can manually control the sample mode by going to the settings of acquisition:
-
Hi I was wondering if someone can help me to write data to an Excel file or text. I get continuous data of a data acquisition through a loop and want to export the data to a file. I tried to write in Excel, but an error returns constantly to my number of samples. However, this error does not come up without this block. Can anyone help?
Thank you
VL
Do you need to export data in continuous or export after the continues to collect data is collected? Here is my example of export after that data are collected. It will maybe help and give you some ideas!
-
Do not export data from table to Excel
Why the invoke node export data to Excel product empty Excel sheet with no data?
If I manually highlight the table on the front panel control, and rerun the VI data get exported. How we highlights the data in the table automatically?
I thought that at first too, but after testing (before that I posted ) I see the order does not matter. Only the selection is copied to. If nothing is selected the journal will be empty.
Note: you can select cells programmatically using a property node (selection start and size of the selection).
So it doesn't seem to be a bug...
-
Failure to EXE to EXPORT DATA to THE Clipboard
LV 2010, Win Vista, Win7.
A TABLE indicator has a context menu that can EXPORT DATA to the Clipboard.
In LV2010 (and LV2010 SP1), this function does not work in an executable file - it works very well in the dev system. LV.
It was fixed in LV 2011, but we can't move to that at the present time.
What is the best way to take advantage of this feature in LV2010?
See this JING
Actually, there is an easier way. The table has a method called "EXPORT DATA to THE Clipboard". Apparently, the method is OK, it is not only called on the menu, when in an EXE file. This is a bug of LABVIEW.
I added only a button called 'EXPORT', an event to respond to a CHANGE OF VALUE on this button and a NŒUD INVOKE to call this method. It exports very well selected cells.
Thanks for your idea, if.
Maybe you are looking for
-
I have the AirPlay button on my iPad mini - how it works
I have AirPlay button on my iPad mini - how does it work?
-
Patches on the screen after cleaning
How to clean spots, I found after clweaning with some windex as a solution. Unfortunately, I sprayed the solution on the screen of the portable dv 7 that I wasn't supposed to. The patches became smaller than patches initially since it happened a week
-
My touchpad on my laptop does not work
original title: my touchpad on my laptop does not work it works when I move the cursor but wen I touch to go to the article that I want to go about it does nothing My touchpad is not working properly it works when I move the cursor but when I touch t
-
Running Windows 7 Home premium Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perh
-
How can blackBerry smartphones, I download my phonebook from one phone to another
I change service providers to one that has the local technical support but horrible coverage (Sprint) to that which do not have local support or provide you with a phone. Sprint uses no SIM card. I use a 9330 with Sprint and received a 8310 old until