Problem with export data from an application and importing data into another application

Similar Questions

• How to export a user instance data and import it into another instance of a directly without storing the physical file.

  Dear all,

  I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.

  I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.

  Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.

  Dear VA Napoleon,

  Thank you for your immediate response. If it's possible means gives the example script.

• How to make a movieclip and import it into another fla file?

  Hello

  I'm having one of those moments of "self doubt mental health."

  Entering the melting below!

  I want to do a clip from a background of graphics card and some existing movieClips that reside in another .fla

  In this other .fla file clips are in the wrong layer in order to start over, I would like to put things away.

  How can I create a clip like this?

  Then I started thinking, how can we create a clip, and then get into another file?

  I even did a test that went: -.

  (1) create the new AS3 file

  (2) draw a box of

  (3) box and press F8 convertir convert to symbol, select movieclip and name it box_movieclip

  (4) box of d/click and consist of a classic Tween and box moving across the stage.

  (5) save under and the file named MovieClip_Boxtest.fla

  (6) open new AS3 file and import into the library of the BoxTween.fla and had a message saying one or several files not imported as their reading problems.

  So after doing the above steps 1 to 5 makes a movieclip, how to do that in another fla file?

  having done this before that I'm panicking that I lost some brain cells!

  Envirographics.

  When I want to move a movieclip of one fla to another I just right click in the library and select copy.  Then, I go to the library of the FLA, library (off the coast of any other symbol) right click and select Paste.

• My HP laptop has had a problem with the uncontrollable from scrolling upward and to the left.

  Hoping someone can help me with this - for a month or if my computer hp laptop has had a problem with uncontrollable scroll upward and to the left. It is now getting worse and happens in all programs, including Word, Adobe, browsers, etc.. Even to type this message is difficult because the cursor periodically jumps to the top left corner of the text box. I tried to attach a new external mouse, but this is not enough. The problem occurs even when not to use the touchpad. I scanned my computer with several anti-virusprograms but no luck. It becomes difficult to use the computer for something else. Even now the down arrows / right does not help. PLEASE ADVISE!

   

   

  Original title: scrolling problem

  Hi Suresh,

  This is a late response to your question, but I thought that I could add more information here.

  From your description, it seems that your PageUp and the keys to the House (or arrows) of the keyboard are either stuck, or failing. These keys usually help access us in applications you mentioned. And since you mentioned that this happens even when the touchpad is not in use, it is likely that this could be the cause here.

  I suggest get you the checked keyboard when using a hardware technician, preferably from your computer manufacturer. That should help you understand better.

  Let us know if you need help with Windows, we are happy to be of assistance.

• Export Exchange 2007 Journal rules and import them into Exchange 2013

  Hello

  I need to export our Journal of exchange rules 2007 and then import them into exchange 2013, this 'http://technet.microsoft.com/en-gb/library/ee633488%28v=exchg.141%29.aspx' page said how it was possible, but I don't have the export-Jou... option in exchange 2007.

  Any help will be greatfull.

  Thank you

  William

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Problem with loading data into OBIA11.1.1.7.1

  Hi all

  I work for a client that implements OBIA11.1.1.7.1, I planned initial loads using load plan.   The charges were running for a long time and when I checked some param DB, they were very low.  so I've updated those and I need to restart the DB. Here my question, I am under a Plan to load now.  If I bounce the Loadplan who was arrested during the restart DB DB will choose the load where it stopped or it will create a new session and load the data.

  Please guide me on this point, on the basis of entries I will make a decision and to continue my work.

  Thank you

  Ravikiran Bikkavolu

  generally it should start from the point failed, but make sure that you double-check things you have configured everything in developing the plan charge as new session/restart task restart failed / restart session failed

  in the later case, it will start to step failed... to check the setting you did for the recovery of load

• Problem with loading data into the cube with members twice in different dimensions

  Have a cube with members dublicate allowed only in two dims (period1 and periode2).

  Saves the contours without error, but when I try to load data, I got some errors:

  "Member 2012-12 is a member in doubles in the sketch.

  A6179398-68BD-7843-E0C2-B5EE81808D0B 01011 cd00 st01 2905110000 EK fo0000 2012 NNNN-NN-NN-12 cust00000$ $$ 1 "

  The dims are two similar periods. I'm changing the names of members and the alias a little in one of them (f.e. yyyy1-mm-> yyyy1 - mm1)?

  Users wouldn't like it...

  Period.1

  yyyy1

  yyyy1/q1

  yyyy1-mm1

  yyyy1-mm2

  yyyy1-mm3

  yyyy1/q2

  ....

  ....

  Periode2

  yyyy1

  yyyy1/q1

  yyyy1-mm1

  yyyy1-mm1-dd1

  yyyy1-mm1-dd2

  ......

  yyyy1-mm2

  yyyy1-mm3

  yyyy1/q2

  ....

  ....

  Tnanx

  Yes your records of entry must have member of full names

• Problems with export and import

  I have a problem with export and import
  
  Here's what I did...
  

  exp "'/ as sysdba'" PARFILE=parfile.txt
  
  PAFILE
  
  TABLES=user1.Table1
  file=Table1_1006.dmp
  LOG=Table1_1006.log
  query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"

  Here is my log export
  

   set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  Current user changed to user1
  . . exporting table               Table1   16019049 rows exported
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  EXP-00091: Exporting questionable statistics.
  Export terminated successfully with warnings.

  Then I started to import
  

  /database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
  
  Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  Export file created by EXPORT:V10.02.01 via conventional path
  import done in US7ASCII character set and AL16UTF16 NCHAR character set
  . importing user1's objects into user1
  IMP-00015: following statement failed because the object already exists:
   "CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
   "EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
   "ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
   "RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
   "TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
   " "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
   "CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
   "AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
   "EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
   "" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
   "SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
   "ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
   "EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
   "DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
   "(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
   "ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
   "MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
   "VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
   "R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
   "  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
   "NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)            "
   "                   LOGGING NOCOMPRESS"
  Import terminated successfully with warnings.

  but I have no lines of base2
  

  [server1]database2
  /database2/rdbm15> sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
  
  Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select count(*) from user1.Table1;
  
    COUNT(*)
  ----------
           0
  
  SQL> exit

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
  PL/SQL Release 10.2.0.5.0 - Production
  CORE    10.2.0.5.0      Production
  TNS for HPUX: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production

  Published by: user3636719 on October 6, 2011 17:23

  could ignore = y, and then try again. It should work

  Concerning
  Julien

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problem with Capture Date & time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• Problem with field date

  Hello
  I have problems with the dates. I have a datagid which fills the XML values. Some examples of dates in the xml document.
  (1) 2008-08 - 05T 00: 00:00Z
  2) 2008 - 07-22 T 00: 00:00Z
  (3) 2008-08 - 04T 23: 00:00Z
  4) 2008 - 07-11 T 11: 18:20Z
  
  I have the function that is called when an element is clicked on the data grid. This function is supposed to take the above date and the date of the datefield in a summary Panel. I continued to get xmllist@23232 to date conversion error if I tried to bind the property of selectDate datefield in dataGrid value.
  
  I've seen examples of datefield defined using a date object. So I stored the date above in a string. Screens of the string data fine only thing is a the componenet (T) of time as well. So I split the string using the string to split the function and the use of "T" as a separator. The problem is the 2nd and 4th dates in the above examples worked well and display perfectly in the datefield.
  
  The 1st and 3rd dates however wrongly displayed. I've posted the table stored items from split, which found that the date of the first one 2008-08 - 05T 00: 00:00Z rose in 2008-08-06 instead of on 2008-08-05
  and for 2008-08 - 04T 23: 00:00Z rode in on 2008-08-05 instead of 2008-08-04. I checked the string that was storing the data grid data and who has been properly storing the value.
  
  any suggestions?
  
  see you soon
  Aerts
  

  sorted,
  lacked a bit of caffeine. I had another string of storing a value different date and because of my stupidity, I tried to parse this string and get the two different dates.

  see you soon
  Aerts

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.