formatting of scale to display only integer values

Similar Questions

• Show only the value not save to the database based on the dynamic action

  Nice day
  I have a select box with products and dynamic action that updates a single display element with the price, based on the selection of products.
  Once the selection is made and the page is submitted, I noticed that the price is not stored in the database. If I change the display
  only the value of a text box, the data is saved. This is expected behavior? If so, can I add something to the text box to make it uneditable?
  
  Thanks for any help you can provide.
  
  Version is Application Express 4.1.1.00.23
  
  Steve

  stmontgo wrote:
  Hello
  Thanks for your advice. I changed the STATE of SESSION SAVE Yes with the other values remains the same, as they met to your recommendations.
  When I change the value, I get the error below. It's maybe because the value is taken from a dynamic action?

  Yes. That would mean there isn't an item "view only". The value is changed by the browser.

  You might change view as textitem and set read-only by adding the ReadOnly attribute to the property attributes of HTML form elements .

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• Slider with integer values only?

  I want to create the slider which accepts integer values only.

  For example: 1.0 to 5.0, step: 1.0

  How to do this?

  In a Word, DIY there is no entire cursor in Cascades.

  Wrap the cursor (ongoing) standard floating point in your own class.
  Listen to the signal valueChanged (float) and immediateValueChanged (float).
  Make your own signals when the cursor moves to one discrete value to another.
  Fix the position of the cursor continues to nearest discrete value in the signal valueChanged (float) handler.

  For each continuous cursor position you will need to find the nearest discrete value.

• How to display only the total value in the upper part of the chart stacked

  Hi all

  I need to display only the total value at the top of the stacked chart in the report of obiee 11g. Can someone help me on this please.

  Thank you

  Hello

  Will be a little different approach suit you like the below a? Total for a day is displayed next to the attribute of the day. Here, the "daily amount" is also an attribute instead of a measure.

  

• I hope that the answer easy. How can I get a cursor to only have integer values?

  I try a slider from the example page to allow the chooice 5-100 users, but the slider also allows values to be doubles. Is it possible to limit the slider to lock only on values when they double?

  I'm not sure, but have you tried minorTickCount and snapToTicks?

• Increase the number of lookup values display only once the research of windo

  Hi all
  
  Must I increase the number of display of the values of result on a search (search for say, organization) window on the administration and the user console.
  Currently, it is 10.
  
  How can I do this?
  
  Kind regards
  Chaturanga

  Modify the JSP

• How can I tell SQL Developer to always display the datetime values in its entirety?

  It's really annoying. Developer SQL displays only the date part of datetime variables. Good, if I preface every query with 'ALTER SESSION SET NLS_DATE_FORMAT = "DD-MON-YYYY HH24:MI:SS";', it will force the datetime value to display, but that it a nuisance!
  
  How can we make SQL Developer ALWAYS display the full datetime value?

  SQLDeveloper it will display Date + 12:00:00 AM (depending on the format you chose). You will get no error. I published an article on this with screenshots, in my blog. If you are interested, you can read [here: | http://srinisboulevard.blogspot.com/2010/05/date-display-in-oraclesqldeveloper.html]

  HTH
  -rsrini

• How to format a column number displayed when drilled down in the dimension

  I have a question:
  
  For example, I defined a drill on track: year/month/day. I then create a report with the first column in the year. When a user clicks on the column of the year, he bore down to display the year, month, etc. So far so good.
  
  Say that the month is a number of type double: 1 for January, 2 for the Fed, etc.
  
  Now, the displayed month is 1,00, 2,00, etc.. Same question when uncovered. The chart legend / label this issue also.
  
  I can format the year for not only no decimals in tab Format of data when the report is created. Question: How can I format the month? I don't have a chance to make the change in Data Format because it is a column displayed automatically through zoom.
  
  I could format the month in Business Admin tool or the presentation layer. But I'm looking for solutions BI answers / dashboard.
  
  Thanks in advance for your help.

  You can set a default value to the system-wide formatting for this column. Add the column to a request format her if necessary, and then in the tab press 'Format of column', 'Save'-> "default" systems for 'Time'. Month' "(or whatever your column is called).

  Just be aware that it will be applicable throughout the entire catalog!

  See you soon,.
  C.

• FFx displays only in the tiny size of the thumbnail since update

  Since FFx updated it displays only those things in a tiny size of the thumbnail. This should be a page full size of print is only an unreadable thumbnail.

  I have not modified parameters. On the file > menu print preview, it shows "reduced to adjust" and on the layout, it is set to portrait. All margins are set to half an inch.

  My Brother laser printer works normally when using the Chrome browser. Why so many problems lately with FFx?

  I don't know if this will help, but in another recent thread, the user has discovered that the problem was the preference:

  • printer_printer_name.print_paper_data

  It has been set at 256, and changing the value to 1 has solved the problem of paper size.

• Windows Media Player displays only one album with the unknown artist.

  Original title: strange going ons

  When I go to my music using windows Explorer, it shows a folder named unknown artists with 7 subfolders.

  When I bring the windows media player, it displays only an album with an unknown artist.

  When I open one of these subfolders, writing the name of the artist, but all the tracks have been listed as track 1, track 2, track... in the library, that I went to this artist's album. He entered all the information correctly. When I clicked open the location of the file that shows the location of the albums as one of the subfolders under unknow artist and all tracks as track 1...

  so, how did we can list everything correctly in the library but point to incorrect information?

  Hello

  What are the file format of the files shown in the subfolders of the library?

  Follow these methods.

  Method 1: I suggest you follow these steps and check.

  You can try to clear the database of Windows Media Player.

  To do this, follow these steps:

  Step 1

  a. exit Windows Media Player.

  b. for Windows Vista: click Start, click run, type %LOCALAPPDATA%\Microsoft\Media Player , and then click OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Step 2

   If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. If you run Windows 7, click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the folder Media Playerand then click delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Also note before performing the steps above, I suggest to save the songs and try the steps above.

  Method 2:

  If the steps above do not resolve the problem, you can try to disable Windows Media player and then enable the feature that is as good as the uninstall and put it back. Follow the steps below to do the same.

  To enable or disable the Window Media Player, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. develop media features , uncheck the box next to the Media Player functionality to remove Media Player. Click OK and restart the computer.

  c. turn on the player again by selecting the check box next to the feature of Media Player.

  Access the link below for more information on the steps above to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  See also:

  The Windows Media Player library: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-library-frequently-asked-questions

• Display a hexadecimal value

  Hello, I wanted to take an integer value and display it as a hexadecimal value. I'm not sure how to proceed.

  Thank you

  Scientist

  Discover Integer.toHexString)

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• 'valid integer value' does that mean?

  When you print a file created by the Canadian tax preparation software, in PDF format I get "A00000000 is not a valid integer value"... What does this mean?

  An integer is a number. Whatever this by a letter or symbols of any kind is not an integer. At some stage in the operation, the program expects an integer and becomes something else instead.

  You can print on paper of a PDF document created by the tax software? Or are you trying to take the tax info and put it in a PDF? If you print on paper, you can find it easier to get help from the society of tax software. If you print on paper and that the PDF file was created successfully, I would try to print the PDF file from another computer, or to another printer, or preferably both.

  Assuming you are printing on paper in PDF format, I would see if you can print from another PDF file. In addition, you can check your printer - either update, driver or reinstall it. Drivers, sometimes being damaged.

  Let us know is it y of the above works.

• APEX 5.0.3 display only point color

  Hello

  I use APEX 5.0.3. I have an element display only and I want to change the color of the font to dynamic red based on a condition.

  I created a dynamic action on page load, Action Set Style, Style name = red color.

  This dynamic action does not show only the elements. He works on the text elements.

  I created the same APEX 4.2 dynamic action and he works there.

  Thank you

  Chandra.

  Hi Chandra

  Yes you are right. The id value is P1_CHANGEMYCOLOR_DISPLAY.

  $("#P1_CHANGEMYCOLOR_DISPLAY").css('color', $v("P1_NEWCOLOR"));
  

  
  

  
  

  Now, please give it a try.

  If your problem is solved, please mark the right answer and close the thread as answered to help others with the same case.

  Concerning

  Mahmoud