Slider with integer values only?

Similar Questions

• Fill a field with a value only if another field has been filled?

  I'm looking to fill a field with a predetermined only if another field is not empty. I have no idea how to proceed.

  Any help would be appreciated.

  Thank you

  Use this code in the custom calculation of LineRow1 script:

  Event.Value = (this.getField("SourceDescriptionRow1").valueAsString == "")? « » : « 001 » ;

• Creation of DVD freezes in when DVD burning to certain percentage (no videos - just slide with music mp3 only)

  With the help of DVD brand and it crashes at 80.7% when burning DVDs.
  No video. Just a slide show with mp3 music. That's all. He's sitting there for centuries now.

  I am looking for other messages in the forum but none seem to be related as they talk about decoding of videos while mine is only slides. Have not tried to remove the music well.

  I used Task Manager to create a dump and «!» analyze - show"in Windbg and it seems that he must wait in WaitForMultipleObjects. It of not very useful, is it?

  Then I tried to cancel the process, he hung on the cancellation. I can only repeat DVDMaker once I kill the process (not only the application) Task Manager.

  With the help of DVD brand and it crashes at 80.7% when burning DVDs.
  No video. Just a slide show with mp3 music. That's all. He's sitting there for centuries now.

  I am looking for other messages in the forum but none seem to be related as they talk about decoding of videos while mine is only slides. Have not tried to remove the music well.

  I used Task Manager to create a dump and «!» analyze - show"in Windbg and it seems that he must wait in WaitForMultipleObjects. It of not very useful, is it?

  Then I tried to cancel the process, he hung on the cancellation. I can only repeat DVDMaker once I kill the process (not only the application) Task Manager.

  =====================================
  First... Turning off the filters can be the answer... the
  next article might be worth a visit:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  If it wasn't the Fox... see what follows...

  MP3 files can be problematic. Convert to WMA
  before the import may be worth a try.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• Slider with own values then Grand Total bars.

  I created a type of Calculator in Flashpromanager.new which will be used to give the visitor an idea of how much money can be made on a Web site.

  The provision would be to use the sliders that the user could move to the left or to the right, then a dollar value seems based on the position of the cursor.  Another slider below or next to it would represent another value then, of course, a total area by adding that show sliders/values above.

  Shared thoughts or ideas are appreciated.  I worked with SwishMax and FLA in the past to create calculators, but I hit a wall with this idea.

  Once again thank you for your time in advance.

  Ok. This is a help file of Flash on how to set up a slider component: Adobe ActionScript 3.0 * use the Slider component

  Here's a tutorial on the display of the value set by a slider component: Code for food: the use of the Slider component: part 1

  For your third value display, the sum of the first two, you just need to add a line of code to the second slider to display the sum in a third textField.

  Who help me?

• button with my value only

  Hello, I wonder if it is possible do a knowledge that select only my value (which I have in a table)

  I tried to do as in the image, but as you can see return the error

  Hi gigi,

  make a button, assign the I32 datatype and set a range from 0 to (num-of-items-1).

  Now the button will provide an index in your table and you simply use an IndexArray function...

  Or use a ring. Or use an enum. Or...

• How to compare 1 value of slider with multiple values

  Please look at the code below.
  
  Here I want to if extracted value of qurey1 is in any value retrieved by query 2 production.
  
  Example of
  c_r1 is fetching value 1 and 2
  c_r2 is also fetching 1 and 2
  
  Problem: If the two are fecthing even value it must not block error.
  While in my code coz locked loop c_r1 STI comparison 1 c_r2 1 and c_r2 2. That's why giving the error
  
  Someone you will suggest the alternative way to solve the problem statement.
  
  
  Open C_R1 for ' select distinct name of nameclass where nametype = 7 and namesubtype <>0 and id_number IN('||) ID1 | «, » || ID2. «, » || ID3 | «, » || ID4 |') by name ';
  LOOP
  EXTRACT the C_R1 IN R1_name;
  EXIT WHEN C_R1% NOTFOUND OR C_R1% NOTFOUND, NULL;
  Open C_R2 for ' select distinct name of nameclass where nametype = 7 and namesubtype <>0 and = id_number' | ID | "order by n.name;
  LOOP
  EXTRACT the C_R2 IN R2_name;
  EXIT WHEN C_R2% NOTFOUND OR C_R2% NOTFOUND, NULL;
  
  If (R1_name <>R2_name) then
  dbms_output.put_line (' error on == > Id :'||) (ID);
  End If;
  END LOOP;
  Close C_R2;
  END LOOP;
  Close C_R1;
  
  Published by: user8807316 on 22 Sep, 2010 03:39

  What about...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with names_tab as (select 1 as id, 'Fred' as nm from dual union all
    2                     select 1, 'Bob' from dual union all
    3                     select 2, 'Bob' from dual union all
    4                     select 2, 'Jim' from dual union all
    5                     select 2, 'Fred' from dual)
    6  --
    7  --
    8  --
    9  select case when count(*) = 0 then 'All Match' else 'Mismatch' end as match
   10  from (
   11        select nm from names_tab where id = 1
   12        minus
   13        select nm from names_tab where id = 2
   14*      )
  SQL> /
  
  MATCH
  ---------
  All Match
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  with names_tab as (select 1 as id, 'Fred' as nm from dual union all
    2                     select 1, 'Sally' from dual union all
    3                     select 2, 'Bob' from dual union all
    4                     select 2, 'Jim' from dual union all
    5                     select 2, 'Fred' from dual)
    6  --
    7  --
    8  --
    9  select case when count(*) = 0 then 'All Match' else 'Mismatch' end as match
   10  from (
   11        select nm from names_tab where id = 1
   12        minus
   13        select nm from names_tab where id = 2
   14*      )
  SQL> /
  
  MATCH
  ---------
  Mismatch
  
  SQL>
  

• ORDER BY a column with NULL values only

  Hello
  
  The order of column has all null values for the results of my query set.
  
  Ex:
  
  Select a, b, c from table1 where type = 'type1' and ID = "id1" order by column1
  
  In the above query, "column1" contains nulls for 'type1 '. The order of the records in the result set is different for different ID values if the values of a, b and c are always the same.
  What is happening in the 10g database.
  
  I have also observed that the order of the records for the same query conforms in the 9i database.
  
  (1) is the difference due to the difference in versions of database?
  (2) is there a way to get the order even records independently entry ID?
  (3) I cannot in the same order in 10 g DB too as the order in 9i DB?
  
  Thank you.

  Hello

  Madhuri says:
  Hello

  The order of column has all null values for the results of my query set.

  Ex:

  Select a, b, c from table1 where type = 'type1' and ID = "id1" order by column1

  In the above query, "column1" contains nulls for 'type1 '. The order of the records in the result set is different for different ID values if the values of a, b and c are always the same.
  What is happening in the 10g database.

  I have also observed that the order of the records for the same query conforms in the 9i database.

  If two or more rows have the same values (or NULL) for each ORDER BY expressions, then you may not be sure what order they will be. The system is free to do whatever he finds convenient. What the system identifies Dresser can vary depending on many factors, including the version, the size of the table, the conditions in the WHERE clause, there is a GROUP BY clause, or not... In all cases, it is not something that you can depend on. If you want the output in a certain order, to specify the order in the ORDER BY clause.

  (1) is the difference due to the difference in versions of database?

  Could be. In all versions, Oracle said that you cannot count on the order being compatible, except if the ORDER BY clause, it is consistent.

  (2) is there a way to get the order even records independently entry ID?

  Add more expressions at the end of the ORDER BY clause, as tie-breakers.
  For example:

  ORDER BY  column1
  ,         a
  ,         b
  ,         c
  

  If table1 is really a table (not a view), you can add a ROWID.
  In most cases, you can ORDER BY expressions that are not in the SELECT clause. So if you have a primary key, you can usually ORDER BY it, even if you don't see it.

  (3) I cannot in the same order in 10 g DB too as the order in 9i DB?

  Of course, ORDER BY works the same in all versions. If you have an ORDER BY clause to unambiguously, the output will be exactly the same order in any version.
  Remember that the absence of ORDER BY has no effect in all versions. If you have an ORDER BY of ambiguous clause, you can not count on the coming out in a particular order in any version.

• formatting of scale to display only integer values

  I'm trying to simply display a graph that has the integer values only and therfore that only integer values appears in the balance to alleviate the congestion of the eye on the chart.  Someone knows how this fundamental?

  If wire you an integer to the graphic terminal data type it should change the entire representation and take care of the problem.

  You can also set numbers of precision in graph to zero properties.

  Lynn

• I hope that the answer easy. How can I get a cursor to only have integer values?

  I try a slider from the example page to allow the chooice 5-100 users, but the slider also allows values to be doubles. Is it possible to limit the slider to lock only on values when they double?

  I'm not sure, but have you tried minorTickCount and snapToTicks?

• Flashplayer ' $' is not a valid integer value

  I've just installed and started playing with Captiveate2 (since her RoboDemo5). I tried the found the branch tab and started playing, but when I asked for a slide to open another project I get this error message (Flash player ' $' is not a valid integer value). Any suggestions?
  
  On a plus note what this product! He continues to improve.
  

  Ah, all becomes clear! Thanks for the help with this it's much appreciated.

  (Now, I'll go off and see what I can break, maybe a beta-tester (joke))

  See you soon

  John
  

• How can I compare unique value with several value...

  Hello

  I want to compare a value with multiple values, how is it possible?

  I tried to design the same logic here as an attachment, but I had the problem that when I entered the value of y that is compared with only a minimum value of x, I don't want I want to compare the value of y with the value of x and then if y is less than x while loop should be stop.

  I want to do because in my program some time I have not result I want, for example, the values of x is 4,5,6,7,8 and value is assumed to be 6 then while loop should be stop but here he considers only less and its 4 here so so that the loop is not stop even there is less then 7 and 8. So I want to compare the value of y with all values of x and if y is less then one of the values while x loop should be stop and led should be on.

  Please guide me how I can do...

  I don't understand?  If there is less than the minimum value of X then it is less than all values of X.  That's what I do anyway:

  

• How to remove empty entries in a table and replace them with the values of the instance?

  I have a table with values and spaces elements. I want to organize items such as table contains only values eliminating the empty spaces and re-organize the table with the values of cotimuous.  I use a bollean table to populate the items, so the bolleans to false fill the empty I don't want spaces. How can I program the above operation?

  Thank you

  Thank you for your solution, but I just found an easier way. INDEXING CONDITIONAL!. How I miss that. in any case, thanks...

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• Read byte with a value up to 127 lire byte with an ASCII value greater than 7F (127 dec)

  Hello

  I have to read a byte with a value greater than 127, Labview turn 27.

  In help I saw that Labview provides a description of ASCII that pour values ranging up to ' 127.

  What do I need to do?

  LabVIEW 6.1

  Windows XP

  Hello

  I want to read a byte with a maximum value of 127, but Labiew reurn arround 27 value

  How do I do?

  

  Rigid wrote:

  Thanks for your help. I'm not changing lyke I understand (my English is poor quiet...)

  I have another program that communicate with the instrument. I know byte (6) must be greater than 18 (greater than 7F actually).

  But with Labview, I'm only 18.

  While it might be higher than 18 x, an I8 is signed, and therefore it cannot be greater than x7F - it has a range of-128 to 127. A U8 is not signed, and it's why he has a range from 0 to xFF. However, x 18 is the same if you treat as signed or not signed. I don't see how LabVIEW can read a wrong value on the serial port. Are you sure you're looking at the correct byte? Your code shows that you split the chain twice. Are you sure that you do this properly?

  Given that you use on Windows you can recheck the chain received using PortMon. Allows you to see what is actually received by the driver for the serial port on Windows.

  P.S. I actually meant the whole byte function.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems