Forms work well in 10 of Forms Builder but not in the OAS 10 G

Similar Questions

• Why Google + comments will work for me in private browsing mode, but not in the regular navigation?

  For some reason, I can't respond to any comment of Google Plus on any Google service when Firefox is in normal browse mode. However, I can answer all the comments from Google over YouTube and Google more in private browsing mode. Google Plus comments work as well in Chrome. I can post a comment in all browsers in all modes, but I can't answer or mark as spam any comment of Google Plus in Firefox, when it is not in private browsing mode.

  Boot safe mode works. Can I disable my modules one by one to see what is responsible?

• Right now, Firefox works on Sony Ericsson Xperia X 10, but not on the Xperia X 10 mini. Why is this and it will be fixed?

  I have Sony Ericsson Xperia X 10 mini and WOULD like Firefox Mobile on it. However, for now, Firefox is only compatible with the Xperia X 10. Why is this and it will be fixed?

  This is due to the processor that uses the X 10 mini. Mobile Firefox requires a processor that supports the ARMv7 architecture, but the processor in the X 10 mini supports ARMv6 architecture.

  For some time Mozilla developed a version which worked on processors who use ARMv6, but currently stopped because there were bugs that caused his accident ever. Mozilla peut start developing for ARMv6 processors once again, but right now they are not actively working on it.

• Follow the work of x 2011 on VGA cable, but not on the DVI cable.

  Running monitor x 2011 on a Dell Dimension 8300 for a year, connected by a DVI cable.  OS is XP sp3 home edition.

  All of a sudden I receive 'No. Signal Source', disturb for awhile and check the settings but still the same message.  Connect the VGA cable and everything is OK.

  Tried to reconnect cable DVI again, but always the same message "No. Signal Source.

  Also the start message received "Check video cable", I no longer receive this message.

  Someone at - he lived their monitor suddenly not being able to work on DVI after 14 months of work and having to change the cable VGA which works fine?

  I'll take your first suggestion Spacechild and stay with the VGA cable.

  The PC is a Dell Dimension 8300 series coming up for 10 years, will replace PC a few times this year, so not worth replacing video card.

  Thank you very much for your help in this matter.

  Ta Ta for now

  Barendtape

• Works well in the preview of Flash, but not when the server!

  OK my Flash animation tests and works well on I publish Preview in Flash, but when I upload it to the server it does not work as it is supposed to. is there a way to debug or trace what happens while it is running?

  Details:

  I have 113 tcname_1 of dynamic text-> tcname_113 field names

  I have 113 buttons named button_1-> button_113

  The dynamic text boxes get their data to a file named trees1.txt

  I tried to change three of the text boxes to use device fonts, but has not made a difference

  Here is my code AC3:

  Links button: all the buttons to open in iframe "tdes.

  link en button number

  I have 113 buttons.

  for (var i: int = 1; i < = 130; i ++) {}

  {if (this ["button_" + i])}

  This ["button_" + i] .addEventListener (MouseEvent.Click, f);

  }

  }

  function f(e:MouseEvent):void {}

  var n: String = e.currentTarget.name.split ("_") [1];

  navigateToURL (new URLRequest("ranch.php?id="+n), "tdes");

  }

  end of the links button

  Create the instance of URLLOader

  var myLoader:URLLoader = new URLLoader()

  the data will come as URL-encoded variables

  myLoader.dataFormat = pouvez

  Load using a URLRequest, same local beeing

  myLoader.load (new URLRequest ("trees1.txt"))

  listener onLoad handler

  myLoader.addEventListener (Event.COMPLETE, onDataLoad)

  Error handling

  myLoader.addEventListener (IOErrorEvent.IO_ERROR, onIOError)

  myLoader.addEventListener (SecurityErrorEvent.SECURITY_ERROR, onSecurityError)

  Could be an error or a message

  myLoader.addEventListener (HTTPStatusEvent.HTTP_STATUS, onHTTPStatus)

  Add a listener for the complete event

  function onDataLoad(evt:Event) {}

  trace (evt. Target.Data.cant);

  for (var i: uint = 1; i < evt.target.data.cant; i ++) {}

  This ["tcname_" + i] .text = evt.target.data ["tcname_" + i]

  This ["tcname_" + i] .visible = false;

  This ["button_" + i] .addEventListener (MouseEvent.ROLL_OVER, buttonover);

  This ["button_" + i] .addEventListener (MouseEvent.ROLL_OUT, buttonout);

  trace (i);

  }

  }

  ON working CAPITAL make the visible text field and change color

  function buttonover(e:Event) {}

  var tf:TextField = TextField (this ["tcname_" + e.currentTarget.name.split ("_") [1]]);

  trace (tf.name);

  TF. Visible = true;

  tf.textColor = 0xff0000;

  }

  MAKE working capital change color and make invisible

  function buttonout(e:Event) {}

  var tf:TextField = TextField (this ["tcname_" + e.currentTarget.name.split ("_") [1]]);

  tf.textColor = 0 x 000000;

  TF. Visible = false;

  }

  reminders of the error

  function onIOError(evt:IOErrorEvent) {}

  trace ("IOError:" + evt.text)

  }

  function onHTTPStatus(evt:HTTPStatusEvent) {}

  trace ("HTTPStatus:" + evt.status)

  }

  function onSecurityError(evt:SecurityErrorEvent) {}

  trace ("SecurityError:" + evt.text)

  }

  again is it works fine when publish Preview in Flash, but not on the server. the text does not show the server when I hover over the buttons!

  You can see that to:

  www.myblueranch.com/index2.html

  Do you notice something that I did wrong? is it possible to debug while on the server?

  Thank you very much.

  Layth

  When I see her in IE8 and Firefox 3.6.8 I see text, although in Firefox the text sometimes does not appear.  But I attribute not this program does not, but even more to what appears to be insufficiently size textfields.  What you need to do is set the property to autoSize to the textfields.

  I created a movieclip that contains the button and the textfield and use that instead of 113 separate instances of both.

  In all cases, you should be able to get the Flash debug player so that you can see this error occur during playback in the browser (http://www.adobe.com/support/flashplayer/downloads.html).  Although you won't find may not be any errors, fair textfields that are not the big enugh to display their text.

• 11g forms builder is not able to open Internet explorer

  Hello
  My problem is that my forms builder is not able to open the form in Internet Explorer when compiling if Internet explorer is not already running, but he is able to open the form in a new tab, if Internet explorer is already running.
  Don't care about my system: -.
  
  Generator of forms of Oracle 11 g
  
  Windows 2008 SP2
  
  Version Internet explorer:-Internet explorer 9
  
  Help, please.
  
  Thank you
  RS

  1. in the generator to make sure you have the valid values for the fields of Application Server URL and location of browser in the preferences (tab) Builder Runtime. Do not leave an empty field.

  2. in the settings of the browser, under the Advanced tab, scroll to the Security section and check the box labeled 'allow active content to run in files on my computer '.

  3. click OK to save the changes. Close the browsers open

  4 retest

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• A60: Work of the Audio Conference on laptop but not on the car radio CD/home

  Hello
  I tried a number of blank disc CD - R and CD - RW, but none of them work with record Sonic to burn music from an audio disc on a blank CD. Music plays on laptop, but not in the CD drive or the car home. Anyone know what the problem is. Really is tired of the use of different brands. nothing works!

  Hello

  You burned the CD and this CD works fine on your laptop, but it of not possible to play in the drive of the car and on your cd player. Is this good?
  Well, in this case there no problems with your laptop.
  I guess that the other players cannot read the CD because they don t supports the support or the audio file format.
  Which audio format you used and you burn music from the original CD?

• WRT160N works, but not with the internet

  Heya!

  We have the WRT160N for a little while now and until a few days ago, it worked very well!

  A few days ago, the internet on our homenetwork started have really very slow and even 1 pc cannot connect at all.

  So we decided to give the router a hard reset.

  After that we did it, the network is back (our wireless network is not protected, but we'll fix that soon after we had it working again).

  Only, we do not have operating... We returned our network so we can use the maps shared on all computers, but internet has disappeared!

  We got 1 pc near the Modem, so we connected the pc to the modem and it got internet right away!

  Then we plugged the modem to the router again once and then beautiful blue light on the logo 'internet' on the router and everything was going on well again.

  Unfortunately, it was not. The internet still wasn't back! local network available on all PCs!

  So in short:

  After resetting the WRT160N, we could only use the LAN, so is not the internet. While the router itself says it has internet (it is connected to the moedem correctly).

  Things you should know:

  -We do not have internet on our modem, PCs that are connected directly to the modem have no internet

  -the cable between the modem and the router is not broken, we have tried other cables but same problem

  -We also made the modem, then turned the router, that rekindled the modem and then the router back, still nothing happened

  -Now we plugged our selector of ould (Wireless-G) back on, and it immediately starts to work OK!

  So please...! What is the problem with the WRT160N? We have forgotten something after the reset? We need to define a configuration somewhere? Maybe its broken?

  TNX for the answers already!

  Your router lost its configuration after you have reset it... You need to reconfigure your router now...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

  SE if you can connect to the internet now...

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down. I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  EU the link below to download the ISO of Windows Vista. It's totally free.
  The site is Digital River. It is 100% legitimate. It is recognized and supported by Microsoft.

  The link also teach you how to burn the iso file on a bootable install DVD.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  Although it says Dell at the top of the page, it applies to both Dell or other than Dell.

  Make sure that you select the correct version of bit.

  x 86 32-bit version =

  x 64 = 64-bit version.

• LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying

  My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.

  Hello

  LifeCam HD-5000 - Support and warranty (3 years)
  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#support

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  http://www.Microsoft.com/hardware/en-us/support

  Product Solution Center
  http://support.Microsoft.com/hardware

  MS material takes in charge and recourse in warranty (90 days support of)
  the date of the 1st call).

  1-800-936-5700 or 1-800 Microsoft (642-7676)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.

• Open a new file in photoshopcc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Open a new file in photoshop cc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Nice day!

  Could you please post a screenshot with the relevant panels visible?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

  Kind regards

  Pfaffenbichler

• RAISE_APPLICATION_ERROR work on A schema, but not on the diagram B

  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
  PL/SQL Release 10.2.0.5.0 - Production
  CORE Production 10.2.0.5.0
  AMT for Linux: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production
  
  Hi, I'm working on this link: http://kamranagayev.com/2009/10/04/block-developers-from-using-toad-and-other-tools-on-production-databases/
  

  CONNECT / AS SYSDBA;
   
  CREATE OR REPLACE TRIGGER block_tools_from_prod
    AFTER LOGON ON DATABASE
  DECLARE
    v_prog sys.v_$session.program%TYPE;
  BEGIN
    SELECT program INTO v_prog
      FROM sys.v_$session
    WHERE  audsid = USERENV('SESSIONID')
      AND  audsid != 0  -- Don't Check SYS Connections
      AND  ROWNUM = 1;  -- Parallel processes will have the same AUDSID's
   
    IF UPPER(v_prog) LIKE '%TOAD%' OR UPPER(v_prog) LIKE '%T.O.A.D%' OR -- Toad
       UPPER(v_prog) LIKE '%SQLNAV%' OR     -- SQL Navigator
       UPPER(v_prog) LIKE '%PLSQLDEV%' OR -- PLSQL Developer
       UPPER(v_prog) LIKE '%BUSOBJ%' OR   -- Business Objects
       UPPER(v_prog) LIKE '%EXCEL%'       -- MS-Excel plug-in
    THEN
       RAISE_APPLICATION_ERROR(-20000, 'Development tools are not allowed here.');
    END IF;
  END;
  /

  The problem is that RAISE_APPLICATION_ERROR (-20000, "Development tools are not allowed here.");
  are you working on a scheme A, but not on the schema B. thanks in advance.

  infotools wrote:
  for the USER sys, she also success.

  Any user who has the privilege of the ADMINISTRATION DATABASE TRIGGERS you connect successfully even if the trigger generates an error. This is to avoid a bug in your trigger to prevent the ADMINISTRATOR to connect to the difficulty of the trigger. If user B in your example received this privilege, the logon trigger will do nothing.

  As has been pointed out, it is trivial to work around - there is very little logic to try to limit what a user can use the tool. I can always find another client tool to use (for example, SQL or SQL Developer * more). And I can always change my client tool to send a different program to the database name.

  Justin