found a bug/typo fault...

Similar Questions

• I think I found a bug

  Hello

  I think I found a bug in the new software of gingerbread and I wanted to see if other people know this as well. In the stock text messaging application, when in a conversation, there is a shortcut feature that allows you to call the person you text by pressing the hard menu button then the call button with a small picture of a phone above her. This will display a list of all the phone numbers that you saved for that particular person. The bug I encounter is that instead of list what each number is (work at home, mobile,...) it just says: 'other' for each phone number. So unless you've memorized all the different numbers, you have for each person, it is impossible to say what cell number, work, home etc, which practically makes this potentially useful shortcut feature useless unless you have a single number registered per person. Everyone knows about this bug?

  The only other bugs I've known are:

  1. the phone restarts itself all while listening to music in the stock music app, making it very difficult to listen to music on my droid x, which is one of my main uses for the phone.

  2. the phone restarts itself during phone calls, which can really be a nuisance.

  3. the phone restarts itself at random times.

  4. the phone turn under sometimes after I turn it off.

  Except that I am very satisfied with the new software of gingerbread. I think that if these bugs can be ironed on the droid x will remain one of the best phones android out there even though he is a year old now.

  I wonder if it's a 2.3.3 thing, because it works fine on the Droid 3 and DX2. I'm reports.

  If, instead of using the menu option to call, you press the icon picture of the person you are texting with and select the phone icon, you get properly labeled numbers? My DX works very well using this method.

• Found the Bug in Spider Solitaire

  I found a bug in Spider Solitaire, on xp64, don't know if it still exists in Windows 7.

  I was a 'Simple' game and removed 7 combinations of Spades before trying to deal with the last set of 10 cards.

  With 7 costumes removed, there were only 3 cards remaining in the game.

  When I tried to cope, I got the dialog box error "You are not allowed to deal with a new line while there are empty slots."

  The problem is that I didn't let enough cards to fill all of the empty boxes, so there is no way to end the game.

  I did some quick calculations, and decided the likelihood of this situation arising from is about 1/100 for a simple game, but much less for average games or difficult.

  Hi Alistair Ward.

  Please report the bug in the website below. This site is a point of connection between you and Microsoft and eventually the entire community. Your feedback helps Microsoft make software and services the best they can be, and you can learn and contribute to exciting projects.

  Microsoft Connect

  http://connect.Microsoft.com/

  Azeez Nadeem-Microsoft support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Xbox will not connect to xbox live and said "Uh Oh, seems to have found a bug in the system.

  So I went to a game on my xbox and it froze, I so stop my xbox 360 and turned it. When it was turned on it says not connected to xbox live, so I did the steps and plugged but it got to the last step where it connects to xbox live, and it said unable to connect to live. So I went on the xbox website and I registered and it says "Uh Oh, seems to have found a bug in the system and it tells me I have no friends and it does not display my photo on the site...» It happened once in October, but has not occurred again until now. I need help please to find what's wrong.

  Try Xbox support:
  http://support.Xbox.com/en-us/

• Found a Bug? -Select the columns to sort by - but not current table

  Just found a problem. Don't know if it's the right place for this but:
  
  -on the spreadsheet (or whatever it's called), when I clicked the sort, the list of columns was for one table OTHER then the one I had open - he had two already selected columns that do not exist in the open table. By clicking on "apply sorting" caused no changes.
  
  -J' have removed the sort criteria and applied so and then reopened the list sort and the wrong table was still in place, but the criteria was allowed.
  
  -J' tried to sort by clicking the buttons in the field headers - but nothing happened - tried several times and in several different areas.
  
  - then I have opened the list sort and he had finally registration of the appropriate table.
  
  It is version 1.5.1 build 5440 against a server 10g.
  
  Glenn

  The table has the same name as a table that you used previously, including in another schema?

  There are a few old bugs where sqldeveloper confused the tables of the same name and used the file layout of table to the wrong table. Those that have been set for most, but it may be something related.

• That I found a bug in the API? : Adding multiple disks SOAP error

  I am able to add the drives linearly as below:

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [0]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [1]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [2]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  However, when I try to add all disks at the same time I get a SOAP fault

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > \@devSpecs);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  The error:

  SOAP fault:

  -----------

  Error string: cannot complete the operation because the file or the /vmfs/volumes/ba5e81fe-201a6c4e/paul-vm1/paul-vm1_0_3.vmdk file already exists

  Lack of details: FileAlreadyExistsPAULWORK > clear

  Is there anyone out there who knows what's going on?

  I did a dump as you said, and it was very helpful.  I needed to add the code below to make it work

  It turns out that I need a unique key for each disk that I add.  Thank you for your help

  my $disk = VirtualDisk-> new)

  controllerKey-online $devSpec-> device-> controllerKey,

  unitNumber-online $devSpec-> device-> unitNumber,

  key            => -1 *($i + 1),

  support-online $devSpec-> device-> storage

  capacityInKB-online $devSpec-> device-> capacityInKB,

  );

  $devSpec = VirtualDeviceConfigSpec-> () new

  operation-online $devSpec-> operation,

  fileOperation-online $devSpec-> fileOperation,

  device-online $disk,

  );

  Is there a better way to do that

• Found a bug in Flashbuilder 4.5, with code to replicate

  I have two classes, which are identical.  We'll call the manufacturer.  The other does not call the constructor.  I think that something may have got corrupted in the process of "renaming" which hides the constructor.  You can see when you rename a class that particlex_woodchip1 to something else, the constructor is not renamed in the "process of change of name.

  It's very simplfied code.  Two classes with 2 orders of trace.  It is what it is.

  http://www.goodnewsjim.com/General/AdobeConstructorBug.FXP

  PS: Fix the shift hits in projects over 20 k of code lines.  It's really hard to write good procedural code in AS3 because the editor has too many processesing between entering letters.  I have a 48 k line file, and there is sometimes 4 second delay between code.  I imagine that the smaller files also have this lag type, but to a lesser extent is not as sensitive.  If you fixed this bug, coders around the world become more Rapids encoders.

  Hello

  In your project, class ParticleX_Woodchip1 has its constructor misspelled as ParticleX_WoodChip1 (CAPS 'C'). This is why it is not renamed when you renamed the class. Are you referring to this same question?

• AppleScript: Options of rounding (am I crazy or I found a bug?)

  I update an AppleScript script that rounds the corners of the elements on the page of the CS4 CS5 versions, now, I understand that you need to say to all the corners of a rectangle, what to do now in CS5, but what I don't understand is the fact that AppleScript don't compile the statement: the value of the option at the bottom right at the corners rounded.

  I can't work if it is a massive FAILURE on my name or a bug. The code I have is:

  Set myDoc to the active document

  say myDoc

  myRectangle make rectangle with properties the value {geometric limits: {50, 50, 150, 150}, fill color: "Black"}

  say myRectangle

  Set the top left rounded corner option

  the value of the radius of the top left corner 5

  Set the upper right corner to the rounded corner option

  the value of the radius of the top right corner 5

  set the lower left corner rounded corner option

  the value of the radius of the bottom left corner 5

  -the value of the option at the bottom right at corners rounded

  the value of the radius of the bottom right corner 5

  tell the end

  tell the end

  The script works fine if I comment on "set the option in the lower right corners rounded" but when I activate the script statement fails.

  Please see if it works for you, and if not, I guess I need to file a bug report.

  Thanks in advance

  Dylan

  Certainly a bug Dylan!

  You can compile if you use the syntax of Chevron and it arrives with a double space between the bottom and right.

  the value le 'property pcO4' to the rounded corner

  Compiles to

  the value the option to angle straight down to corner rounded

• I found a bug. All my addons are missing

  For some reason, all of my addons are missing. And since I sync all my settings between three computers, they all disappeared from these browsers as well! Yes, they are all compatible with the new Firefox 29 or 28, regardless of this new it is.
  Now, I downloaded those I can find. Some of them I had to watch for a long time get the one I wanted, and now I can't find them.
  This is the first major problem I've ever had with Firefox, but it's a doozy...
  The addons are gone for good. I tried everything I can think of to recover. I'm writing this to let you know that there certainly is a problem with the new version.

  That was plenty of themes or Personas (light themes)

  The latter (light themes) are stored in a pref in the prefs.js file, not an extension.

  Are there any numbered pref-# .js files in the Firefox profile folder?

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• I found a bug on the adobe website, where should I report?

  

  I will book not to buy because of this error.

  Hi Rohit,

  I checked the same url at our end, and it works fine. Therefore, please try another browser or reset the browser and then try to open the link again.

  Concerning

  Shelly

• I think I found a bug with CC 14 in what text layers will not be rendered. Super boring!

  I just changed a video on Youtube and I noticed that my text layers, which I have added to my images wouldn't make out in video. Rather my video to freeze, and then start playing again. I tried to make out in ProRes format and it happened again. So I just wanted to make the text and low and here the screen was blank. I just changed recently cs6 y at - there a way around this? It's a good thing that I discovered this at the beginning because I always have my 30days to cancel.

  I'm editing on a Macbook Pro retina 15 inches with 2 GB Nvidia card and 16 GB of RAM.

  Thank you all in advance

  In addition to the oddities that Ann has been noted, the sequence is interlaced while the export parameters are progressive. I have no particular reason to think that one of these weird little details would cause a problem, but it is of course an original set of properties.

  I would start by checking with a more normal scenario to see if the problem persists:

  1. New project
  2. New sequence, using a 1080 preset, such as AVCHD 1080 p 24.
  3. Create a universal counting Leader and a title and add both to the timeline.
  4. Export to the same preset from YouTube.

  If the result of this sequence has the same problem, then it's time to collect information about your system: OS version, map chart & driver, if you have installed the codecs.

  If the title survives the test, then start to tweak things in the direction of the problematic sequence, change only one variable at once--adding weird 29.99 video AVCHD, changing a single sequence setting in time, etc.. Export after each change and see if the problem returns.

  Tests should also be:

  1. Try the different paths of coding: 'in-process' by clicking Export in the export and through SOUL settings dialog box by clicking on queue.
  2. In the SOUL, encode with the Import parameter sequences enabled natively, then again with the option turned off. [Preferences > General]
  3. Test rendering to GPU acceleration engine and with him assign software only [file > Project Settings > General.

• Possible bug found in hyperlinkctrl.c when you use the "VAL_POINTING_FINGER_CURSOR" mouse cursor in your own user interface.

  Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.

  I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.

  The error is recoverable error: ' from the mouse cursor is not valid.

  This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).

  This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.

  I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...

  The hyperlink control's source code is located in \toolslib\custctrl\hyperlinkctrl.c

  The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.

  This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.

  However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.

  The mouse is not over a hyperlink
  If (cursor is VAL_POINTING_FINGER_CURSOR)
  {
  Reset the cursor to the previous cached cursor
  cursor = GetTsvCursor();
  errChk (SetMouseCursor (cursor));

  ... etc...

  }

  So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.

  Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?

  :^)

  JB

  In the meantime, I have submitted a bug with ID #545203 report to track down this problem.

  -Johannes

• Exhibiting in context sensitive help display bug

  Hello

  I found a bug, but just didn't know where to report so I'm posting it here. (What is the suitable channel for bug reports)?

  When I wriggle-over "before software final Position" on the property of an axis node SoftMotion, context-sensitive help contain this line:

  Valid values are between 0 and 253. The default value is 230.

  I was puzzled, because I use (successfully) values well beyond this range. In any case, I detailed assistance from opening and saw:

  Valid values are between 0 and 2⁵³. The default value is 2³⁰.

  It's a very big difference! Is it simply a typo, or a result of formatting stripped using the context?

  Hi JKSH,

  I presented the CAR #390204 to our R & D group for the survey.

  In addition, here a link to a page describing the process of bug reports.

• Is there a bug in CVI 2010 SetTableCellRangeVals and SetTableCellRangeAttribute for strings - particularly in 64-bit mode?

  It seems that I can't get SetTableCellRangeVals to publish string data to a table in 32-bit mode, I can't SetTableCellRangeAttribute to work for arrays of strings and now it seems numbers either. I just get garbage - it could be my code, however.

  Worse in 64-bit mode, I can't seem to post anything (for strings at least), but get a GP fault instead.

  I played with the size of the pointer in the array of strings (from 4 to 8 bytes

  The heart of the test code is here but the files are attached as well.

  int CVICALLBACK Test_callback (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  int i, numrows = 10, byattrib;
  int bit32 = 1;
  Double * dbl_array;
  char * string_array, * string;
  Rect a_rect;
   
  switch (event)
  {
  case EVENT_COMMIT:
  GetCtrlVal (main_handle, PANEL_BYATTRIB, & byattrib);
  String = malloc (50 * sizeof (char));
  If (bit32)
  string_array = malloc (4 * numrows * sizeof (char));
  on the other
  string_array = malloc (8 * numrows * sizeof (char));
  for (i = 0; i< numrows;="">
  string_array [i] = malloc (50 * sizeof (char));
  dbl_array = malloc (numrows * sizeof (double));
     
  for (i = 0; i< numrows;="">
  {
  dbl_array [i] = i * I * 3.1416.
  FMT (string, "The value is %f", dbl_array [i]);
  strcpy ([i] string_array, string);
  }
     
  a_rect. Top = 1;
  a_rect. Left = 1;
  a_rect. Height = numrows;
  a_rect. Width = 1;
     
  status = DeleteTableRows (main_handle, PANEL_TABLE, 1, -1);
     
  status = InsertTableRows (main_handle, PANEL_TABLE,-1, numrows, VAL_USE_MASTER_CELL_TYPE);
     
  If (byattrib)
  {
  status = SetTableCellRangeAttribute (main_handle, PANEL_TABLE, a_rect, ATTR_CTRL_VAL, dbl_array);
     
  a_rect. Left = 2;
  status = SetTableCellRangeAttribute (main_handle, PANEL_TABLE, a_rect, ATTR_CTRL_VAL, string_array);
  }
     
  on the other
  {
  status = SetTableCellRangeVals (main_handle, PANEL_TABLE, a_rect, dbl_array, VAL_ROW_MAJOR);
     
  a_rect. Left = 2;
  status = SetTableCellRangeVals (main_handle, PANEL_TABLE, a_rect, string_array, VAL_ROW_MAJOR);
  }
     
  free (string);
  for (i = 0; i< numrows;="">
  free (string_array [i]);
  free (string_array);
  free (dbl_array);
  break;
  }
  return 0;
  }

  Thanks for any help,

  Greg

  Greg-

  Certainly, you have found a bug.  However, I think that the issues that you run in a SetTableCellRangeAttribute are the result of a misunderstanding of the function.  This function, when you use it to set the value, sets the values of all the cells in the range to the same value.  Therefore, the var_args parameter must be the value that you want to set all cells to and not a pointer to an array of values.  In your code, you would need dereference the berries, and then, you would see that all the cells are the same value, which is the expected behavior.

  I created a bug report for the accident which follows from the definition of values on string cell types in 64 - bit with ID 284842.  This bug will be fixed in the next version of maintenace of the CVI.  In the meantime, you should be able to use SetTableCellVal to set the value of each cell individually in 64-bit.

  I'm sorry for the inconvenience-

  NickB

  National Instruments

• a bug in emergency calls

  Hello

  IAM Iphone - 6 more user. I found a bug in emergency calls, while the iphone is locked.

  We are not Apple, simply users. Please send your comments

  http://www.Apple.com/feedback/