* Scan to * on Officejet L7555 all-in-one

The button scan to on the L7555 be able to invoke a scan without having to go to the selected computer, and then click Scan? I just installed the complete Version 14 software for this printer on your desktop Windows7 64 bit. Now, I see the new PC as a place to scan to available on the printer. But when I choose that PC and select this option to create a PDF document, the printer just sits there, saying: "awaiting scan. On the PC, I get a prompt indicating that scan in PDF format has been selected, but I must also click Scan on the PC before the scan occurs. Is it possible to configure the software on the PC so that the scan happens as soon as I choose the type of PC and file from the buttons on the printer?

Thank you.

It was actually an option in the solution center to change this. If you open the solution Center on your computer, navigate to settings-> settings of scanning-> front panel scan button settings , it must be 2 notches there. If both are unchecked it will simply send the scan on your computer, if one is checked then you will need to confirm the settings of your computer every time you scan from the printer and if only the second one is checked, you will have an overview of scanning on your computer before it saves.

I hope this helps!

Tags: HP Printers

Similar Questions

  • 'no scan options' on OfficeJet 7210 all in one

    I'm unable to solve a problem getting an Office Jet 7210 printer all-in-one to scan to a laptop HP Pavillion with Vista Home premium.

    The printer prints very well and very many faxes.  It does not analyze.  I deleted and loaded the new software and interpreted instructions on the tray upward.  It did not help.

    I have atttempted to use the HP Solution Center for printers and it identifies the printer and software.  It will not go in order once it displays the software and the connection of the printer.

    The printer is always 'no scan options '.  I have a short USB cable that is in great shape, connect the all-in-one printer to the laptop.  I have played all of the trouble shooting on a number of HP and associate directors.

    Any help would be appreciated.


    Normally, this error simply means that the scan options are simply not setup. The document below will work you through the implementation. Let me know what happens.

    A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

  • Problem scanning with HP Officejet 5610 all in one

    I have problems with the scanning of documents.

    Computer is Mac OSx Version 10.8.5 operting.

    I use to be able to analyze only the documents that have been placed on the glass and I would press the button "scan" on the printer and the document would scan to my counter top.  I could not scan several pages by feeding in the upper part of the printer.  It was with my old Mac operating system.

    Recently, I had the SW on my MAC update to OSx.  Now I can go into the settings of the printer and scan several pages unless I have a document in the feeder at top of the page.  But I can not put a single item on the glass, then press scan.  I get the error message is 'no scan options.  Refer to the documentation for the device to trobuleshoot.  Press ok. »

    Any help?

    Hi pbeachiii,

    I'm sorry to tell you that HP does not provide driver support of technologies for analysis of your product on the Mavericks.  This solution does not provide support for the scan on the printer button.

    You can ensure the best experience with your product by accepting the Apple software updates so that you have the latest available print and scan drivers.

    Use the Image Capture or preview applications to begin analysis of your Mac.  With one of these applications, you should have the ability to scan from either the glass of the scanner or the document feeder.  You just need to specify the source for analysis as a parameter in the scanning software.

    Hope this helps,

  • Officejet 5610 All - in One with my IMac using OS x 10.9.

    Cannot save the pages scanned on my Officejet 5610 all-in-One with my IMac using OS x 10.9.  Worked well with 10.8.

    Thanks for your reply.  When I found that the same problem had been sent by others, I discovered the same advice. Used the procedure you described and solved the problem.

  • HP Officejet 5510 all-in-one: scan multiple pages into 1 file/scanjob with my HP Officejet 5510 all-in-one

    Is it possible to scan a page one / several pages in a single file scanjob/one on the flat of my HP Officejet 5510 printer all-in-one?

    I did do some additional research on the internet and found the HP scan and capture the app. Although my HP Officejet 5510 all-in-one did not appear in the list of devices, I installed the app, and it has provided a solution for my problem: scanning multiple pages in a job file. Banhien suggested to click on the + sign, but the drivers, I had do not have one, but the HP scan and capture app has this feature. It's so nice. My problem is solved.

  • Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

    I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

    When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

    When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

    The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

    Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

    I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

    My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

    In addition, perform both of these resets and I would like to know how they are!

    All-in-one HP printer reset - HP Officejet 6500 - YouTube'

    Have a great day!

  • HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

    HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.


    Thank you for using the HP Forums.

    You can try this alternative solution to Scan:

    HP extended Scan


    Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

    Let us know if it works.

  • HP Officejet 5610 all-in-one: need to Downlad HP Solution Center so I can't scan on my HP printer user

    I tried to reinstall the software and drivers for my HP Officejet 5610 all in one printer, but when I start the installation process on my notebook (Windows 7 64-bit) a window appears and says that it cannot find the specified file. I download the sofware and complete player file but for some reason whenever I try to install this same error window opens and I can't complete installation.  The error log says the file not found X:\hpzsetup.exe source. Any body to meet this problem and if you have how can I find a way to install the HP Solution Center.  My printer works fine, but I do not have the scan software. Of suggestiuons or ideas are appreciated.

    Thank you very much for the link to HP Scan range. I downloaded and installed and it works fine. Just as good as what I had in the HP Solution Center.  I really appreciate your help

  • How can I scan multiple pages to a PDF on HP Officejet J4680 all-in-one?

    I have a printer HP officejet J4680 all-in-one was given to our non-profit organization.  How can I use this to scan multiple pages to a PDF file and send it to?


    Form of the document refer to the article on the digitization of several single-file pages.


  • Fax/scan without a phone with officejet 7410 all-in-one line

    I have an officejet 7410 all-in-one and UNPLUGGED my phone line at home. How to download software in order to fax/scan items? I get the message error is "you must install or run HP software for this feature.

    Here is a link that will help you with that.


    1. Enter the name of your printer DRIVERS AND SOFTWARE

    2. choose your operating system

    3. then, when he asked to SELECT A DOWNLOAD, choose the software FULL of FEATURES.

    Let me know if this can help, thank you.

  • HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

    After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

    Hi @DMT1,

    Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

    You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

    First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

    Some links that might consult to try to resolve the problem:

    Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

    Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

    Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

    I hope this helps. I would like to know how this happens. I hope that the problem is solved without

    disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Take care now and have a wonderful week ahead.

  • All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

    My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

    I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.


    I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

    I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

    Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1


    Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

    Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

    1. If the printer software is installed, uninstall it.

    2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

    If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

    Here are some of the files and locations but check they are all listed and not missing anything.




    3. open a new file and copy and paste the address of each file in the search bar. It will look something like this


    before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this


    the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

    4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

    5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

    As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

    NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

    And thank you Gemini02 for helping me with this.

  • OfficeJet 4215xi all-in-one: scanner

    My officejet 4215xi all-in-one decided to stop scanning correctly.  I feed my original in the automatic document feeder (as I did for years), it is no longer pulls the documents in the leading pace the digitized the image being spread or with about 2-3 inches of white space on the leading edge. I listen to the officejet, looks like it starts scanning, but the paper don't be pulled ahead for a few seconds (where white space and text image burrs). Yesterday, I was able to scan one page at a time with a bit of success, but today I can't do and I'm now getting an error message that the scan was not successful. I hope someone can give me the steps to get this corrected.  Thank you!


    I'm glad to hear that your problem is solved and everything works fine now.

    The extended Scan software is the last software scan appearance fo the HP.

    Good day!

  • OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

    HP OfficeJet Pro all-in-One 8610 print intermittently


    This is a request for additional assistance from HP, Apple and AT & T Community Forums

    Machines and affected software:

    Printer HP OfficeJet Pro 8610 e - All - In - One.

    Serial number: CN4CNE3463

    Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

    iMac 21.5 inch late 2009 (daily use)

    Serial number: W89415S5PC

    OS X El Capitan: Version 10.11.6

    MacBook Pro 13.5 inch late 2009 (occasional use)

    Serial number: W8942UW766D

    OS X El Capitan: Version 10.11.6

    MacBook Air 13.5 inches mid 2012 (daily use)

    Serial number: C02HX3ZADRVC

    OS X El Capitan: Version 10.11.6

    Wireless router: AT & T U-verse ARRIS NVG589

    more AT & T Wireless Access Point VEN501 device

    Wireless Router Range Extender: Linksys RE6500

    Multipoint unresolved printing problem:

    HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

    09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

    (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

    (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

    (3) tried to scan the printer for iMac's wireless: would not scan.

    (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

    (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

    (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

    (b) the iMac to the router and wireless router for printer: test page will not print.

    08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

    AT & T: recommended

    (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

    (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

    AT & T told me that the printer should work fine now.

    Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

    Wireless to the router for printer

    Wireless to the router and Ethernet cable for printer

    Ethernet cable to the router and wireless to a printer

    Ethernet cable for printer

    Another experiment on 11/09/16 led to erratic printing depends on the original machine:

    1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

    a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

    b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

    Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

    2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

    I'm sorely need a remedy to this overall situation.

    • What is originally intermittently, the HP printer?
    • What is originally a wireless printing and Ethernet to vary?
    • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
    • The question one demanding a new router?
    • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
    • With all machine software updates could be software problems cross machine?

    Link to the firmware.

  • Scan with a HP 5610 all in one

    I have a HP Officejet 5610 all-in-one.

    After I turn it on and press the button "Scan" of the Control Panel, I get the Message 'No. Scan Options' and I can't further with the sweep. Installation copy works OK. I also tried to disconnect the device from the mains for more than a minute and then reconnect. But all the same.

    Does anyone know the solution to this you problem?


    Hey ricmalta,

    I see that you have an Officejet 5610 and the scan settings have been reset on the printer.

    What is the operating system of the computer connected to the printer?

    How do you have the printer attached to this computer?

    You have the full software functionality for the 5610 installed on this computer?

    I would advise to take a look at the document below the link to get the procedure to resolve this problem.

    A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

    Let me know how it goes,


Maybe you are looking for

  • Internet conflict TimeCapsule & GUI access not wifi. Why?

    Hi Geniusses, at home with that I have a Time Capsule is my router (from my modem-DSL providers) and it works fine.However, now that I added my Airport Extreme using bridge as extender, the WiFi connection is at full speed but I lose the internet con

  • How to uninstall FastestFox?

    How do we uninstall FastestFox. Since adding FastestFox my computer is weird when searching displaying results... very annoying. Thank you!

  • Format NSV URL has changed!

    In LV2010, it seems that you now have to include the prefix psp Example: NI.var .psp://crio-hpu1/hpu System Parameters/HPIM.HE_PID_Kc where previously it was acceptable to just have: cRIO-HPU1/HPU System Parameters/HPIM.HE_PID_Kc Does anyone know whe

  • 8 GB of RAM upgrade for ES1-311-C9XM recognized as 2 GB

    I bought a laptop Acer Aspire ES1-311-C9XM earlier. Only, it came with 2 GB of RAM so I decided to upgrade the RAM. After doing some research on the net, I discovered that it could be upgraded up to 8 GB of RAM. The RAM module that it was originally

  • Window Media Center, error code:-2146959355, could not record show. Live TV does not work. Help?

    Hello I'm having a problem with my Windows Media Center. It worked perfectly without any problem since I built the computer more than 6 months ago. I have not changed anything, the only thing I've done recently is set up a homegroup on my local netwo