Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

Similar Questions

• Have a "Wireless Zero Configuration" service services means that I have a wireless adapter?

  Hi, this is my first question in the Microsoft forum,
  I'm trying to connect to my old computer which I have not used for 6 years to the internet but I'm not a great success. I think that my pc is not a wireless adapter. But in services, I have a service called 'Wireless Zero Configuration'. This means I have a wireless adapter or even the pc without card wirless they such race of service?
  PS - I am running XP

  No, this service is installed on all computers, wireless or not.

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• How many times can install and uninstall and then re-install the retail copy of windows 7 (any version)) on different computers

  I want to know that how many times can I install windows (any version) on different PC after unistall.

  in other words, if I installed in a pc then uninstall, then install on a different computer (PC), then how many times can do this process or repeated in the life of windows time.

  If you reinstall on the same computer, you can reactivate by phone until the 5th time, after that product Activation may be required. Moving to a new machine will require the activation of the product.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.

  Original title: unexpected reboot

  My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
                                                                              
  Maybe the problem is related to this message in log file:
  SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
  Source: Service Control Manager

  I would be very grateful if you can help me.

  Hello

  Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.

  Steps to select Disable automatic restart on system failure option:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select DisaDisable automatic restart in the event of system failure

  Step 2: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• Please tell US if there is a way I can recover a FILE that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

  Please tell US if there is a way I can recover a file that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

  If it was very recent, this tool would have a good shot at it.
   
  Recuva
  http://www.Piriform.com/Recuva
   

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Problem with Wi - Fi with Wireless Zero Configuration

  Hello

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122.

  I'm getting an error Microsoft Window XP - D5SJG5K1.

  The INSPIRON laptop uses the DELL Wireless 1397 WLAN Mini Card.

  Please help, thanks,

  Joseph

  This problem occurs for several reasons. Some computers and hardware manufacturers provide their own configuration software that replaces the service provided in Windows Wireless Auto Configuration. In this case, you must use the software that is provided by the manufacturer to set up your wireless network. If you want to use the wireless network Setup Wizard or the viewavailable wireless networks to configure your wireless device, see the documentation provided with your computer or with your wireless network card. Use this documentation to determine whether you can use the service of Wireless Auto Configuration to configure your wireless network. Sometimes, you cannot use the Windows features.

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and clickOK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then clickchange settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then clickOK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then clickapply.
  4. In the Service status area, click Start, and then clickOK.

  Young people and learning... Have mercy.

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  Is this the same computer (Windows XP?) as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windowslive/forum/messenger-signin/cant-sing-to-messneger/23775604-86f9-4bd0-8de8-cc39f10df40b

  ~~~~~~~~~~~~

  Related resources can include:

  MSN Solution Center
  (Registration required; Subscribers of MSN Premium only!)
  http://answers.MSN.com/

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

• I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.

  1. I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.  However, I reset my computer and connected only on yahoo.com but I couldn't sign in to other sites like google, wellsfargo and.  I tried to disable this add-on 'Shockwave Flash' managing by module.  Help, please.  Thank you.
  2. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Shockwave Flash should not do that. However, if you want to delete it go to programs and features in Control Panel. Click once on Adobe Shockwave Player and click on uninstall in the menu at the top. I suggest you do a comprehensive analysis here, a free service offered by Microsoft. http://OneCare.live.com/site/en-us/Center/whatsnew.htm