Foxtabs does not. Using firefox 23.0.1. Vista Home Premium
When I open a new tab I get a vacuum and my foxtabs are gone, I want to say foxtabs does not work.
What can I do? Please, please help.
I use firefox 23 and foxtabs 1.4.9. Windows vista Home premium.
To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?
Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.
Thank you!
Tags: Firefox
Similar Questions
-
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
click right does not work, Ctrl + C is. Vista Home Premium 64-bit
Tried restoring the system with no result. CMD: SCF/scannow showed corrupted files, but could not fix. I do a recovery?
Hello
Because these two problems are related to the various pieces of hardware, they cannot be related. In addition, they cannot be related to sfc/scannow results. If there is a hardware problem, re - install the operating system would not solve the problem. The first thing we do, if possible, is cross test equipment. Of course, if it is a laptop the first step can be taken...
- The keyboard (ctrl-c) works on another PC? (Right-click) mouse works on another PC?
- Another keyboard (ctrl-c) works on your PC? Another mouse (right click) works on your PC?
Or the other of these problems only occur in some programs, or they occur in all programs?
Tricky
-
I installed Microsoft Flight Simulator 2000 Professional Edition, on my laptop. I bought an old Microsoft Sidewinder Precision Pro joystick. Can I use the joystick with my Vista Home Premium OS?.
Hello
What is the model of the sidewinder Precision Joystick?You can use it with Vista, but sometimes it can cause a problem. Check the link and if you have a problem follow the steps in the article.You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer
http://support.Microsoft.com/kb/294672 -
When does support for the end of windows vista Home premium
When does support for the end of windows vista Home premium
Original title: support
Watch the news of Vista on this page:
http://Windows.Microsoft.com/en-us/Windows/products/lifecycle
-
Why not write my dvd writer in vista Home premium?
I have a Sony Vaio VGN - N310EE Vista Home Premium 32 bit laptop
and I can't wite CD OK, but can not write DVD
What could be wong?
Hello
Check with Sony Support and their drivers and documentation online. He used to work?
Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/============
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
How to use desktop connection remote on Vista Home Premium to Windows 7 computer.
original title: HOW TO USE DRC ON VISTA HOME Premium TO ONE OTHER COMPUTER WITH WINDOWS 7
I would like to know how to the DRC to connect to another computer with windows 7 for business. I have the ip address, the name of the computer, dns connections, physical, active dhcp, ipv4 addr and mask ip address-specific ipv4 subnet.
How do you use the DRC?
Help, please.
Thank you.
Hello
This thread should give you all the information you need to know about the implementation of remote desktop
-
Windows Media Player does not work. Impossible to use slide show programs, can not open attachments that require Media Player. Tried to update and couldn't. Couldn't fix it.
Hello
Run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
HP Deskjet D1560 printer does not work with this laptop with windows7 Home premium
My printer works with windows vists computer but it does not work when connected to my laptop which runs on windows 7 Home Edition premium, can any body help on this please?
You are supposed to install the HP full feature software / driver, specific to your version of bit of victory, before connecting the printer
-
Hi, I have just formatated my pc and when I go to the hp page I find dident driveres for justo homepremium x 64 for windows 7 and windows vista... my windows 7 Home premium, I had when I buy my pc...
What can I do if I can find the drivers for homepremium o I just download for windows 7 or vista?
Original title: windows 7 x 64 homepremium
Hi Enrique.
Thanks for your post on this forum.
Ideally, most computer manufacturers provide drivers independently different editions of a Windows operating system. This means that the same driver can be used for the operating system Windows 7 Home Premium, Windows 7 Professional, Windows 7 ultimate and Windows 7 Enterprise, regardless of their editing.
The only thing you need to check is that it corresponds to the architecture of the operating system (32-bit or 64-bit).
If you use a 64-bit operating system, make sure that you install 64-bit drivers and for the operating system 32-bit, only 32-bit drivers must be installed.
In your case, HP provides the drivers for Windows 7 operating system, and it can be installed on the computer regardless of the different editions of the same operating system. But please make sure that it matches the architecture of the operating system.
Hope it will be useful. Please get back to us if you need help with this query.
-
Will not boot Acer 4710 with OE Vista Home Premium - upwards
Stop Windows updates have been loading. Computer has reached the stage of "Configuring updates: stage 3 of 3-0% complete.» Do not turn off your computer. »
The computer, then stops and restarts at the same point, i.e. "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer. "and will not start enable password to enter.
I don't have a Vista DVD as Home Premium came pre-installed. I can access to "setup" via the F2 key and also some repair opportunities. I have not saved for a few months.
No activity of the mouse is possible.
Mike,
Try these 2 things:
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not work, try to make a Bootable ERD to do a Startup Repair:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your grave in the category above, download the ISO on the provided link and do a repair of the disc.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Acer has an Alt + F10 at startup process to consider back to factory settings.
See you soon.
Mick Murphy - Microsoft partner
-
Photos will not attach to windows mail with vista home premium
Help!
I can't send pictures by using the button 'send' more. I have to highlight a photo and then click on send, he asks me what size I want, said preparing to send then nothing! Windows Mail does not open, and when I open it manually there is no outgoing email waiting or projects. I used to be able to do that, on this computer, but it stop working.
Any ideas?
HP Pavilion a6200n
Windows Vista Edition Home Premium
AMD Athlon 64 x 2 Dual Core Processor 5000 2.6 GHz
2 GB OF RAM
Using windows mailWindows Live Mail is set as your default e-mail Client:
Windows Vista - make Windows Live Mail Windows default e-mail program (left click this link)
Maybe you could open a new e-mail message and then attach a photo...
Just left click the button attach, and then search for the photo. -
Is it useful to reset my Windows Vista Home Premium?
He is three years old (he got the summer three years ago) and it is moderately-heavily used, as in, it is used every day, and there are many programs and files downloaded and installed I do not use. Through my computer and delete all of these files would take much more for a long time that simply reset and its replacement by backups.
My computer is idle or, at least I think, however, I was maybe just more patient three years ago.In addition, please don't suggest you get a new computer, or to download a program to uninstall other programs for me, because my computer spastic and these programs tend to crash.Ah, Yes, that's another question. Some programs that I want to use more (Skype, Apple Software Update, RegClean, etc.) crash as soon as I opened the, and there seems not to be an error with the program, because I posted on other forums vain.So, is it useful to reset my computer? I can do that easily, it will take little effort. Basically, I want to say it's worth it, is, she will fix these issues, such as the opening of the program slowly and crashes random application? Thanks in advance.Hi MitchellKager,
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
You can also see the following articles for more information about improving the performance of the computer:
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
I hope this helps.
-
How to configure a printer LPT when adapted to use a USB Port - Windows Vista Home Premium 64-Bit
I have a computer that does not have an LPT port, and the printer that I want to use (EPSON Stylus Color 850) is not a USB Port or Ethernet. I bought a cable USB2LPT and attempted to get the printer to work.
My problem seems to be the choice of the port to use. Here are the steps I followed:
1. pick "Add a printer" of the control panel. Printers
2 choose 'Add a local printer' (even if using the USB Port, like when I plugged the USB cable into the computer, I received the message installing driver recognition but not familiar "bong".)
3 selected "use an existing port.
4 select "USB001 (virtual printer to USB Port) - it was my best estimate of the long list provided."
5 choose the EPSON Stylus Color 850 ECP2/PCS.The pilot was then installed without error and tried to print a test page which is that hangs without error.
I deleted the printer then tried to assign the LPT1 port. No help here either.
If someone can help me with the installation, so I can get my documents to print I would appreciate it a lot.
Thank you
Dave
You do not have an LPT port. When you select the LPT port data are always written him even if your computer does not have the hardware installed to make it work. It would work if you have installed a parallel PCI Port card.
USB001 would be the first choice, then USB002...
The next step as Fouzan points out is to contact the supplier of cable or Epson for support of printer you. Start by Epson.
You can try other cables, parallel PCI card or another printer. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
Is not start the BITS on Windows Vista Home Premium 32 bit service
I'm unable to start the BITS service on my computer.
I use Windows Vista Home preimum 32 bit OS.I tried the following solutions that I found here.
(1) sfc/scannow
Result:
=====
C:\Windows\System32>sfc/scannowStart scanning system. This process will take time.
Start of the phase of verification of the scanning system.
Full check of 100%.
Windows resource protection found corrupt files but was unable to repair some of th
EM.
Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.logC:\Windows\System32 >
(2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.
I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.
When I start the BITS service, I receive the following error message.
Please suggest me how to solve the problem.
The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
Concerning
Yannick DEVOSI tried to run the Norton removal tool.
No luck.
Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.
Thanks for your great support.
Concerning
DeVos -
What are the default programs to use to start a Windows Vista home Premium
Several programs are running at startup, what is the solution for this.
Should we indicate programs that must be in the start menu to the top
try to do a cleanboot following the instructions
Perform a clean boot Note if the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.- Log the computer by using an account with administrator rights.
- Click Start
type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.
- On the general tab, click to select the Selective startupoption, and then click to clear the Load Startup items check box option. (The box use the Boot file is not available.)
- On the Services tab, select the hide all Microsoft services check box, and then click disable all.
Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
- Click OK, and then click restart.
Maybe you are looking for
-
want to put a slide show on Facebook
made a slide show for my daughter's birthday wanted to post it on Facebook, anyway there are 28 minuets left on his birthday. I was stuck for hours. Way to go dad.plese help
-
My computer recently automatically upgraded to Windows 10 day. I can't find anywhere is more where I can spend my color to grayscale printer or vice versa. It only prints B & w now. I downloaded the recommended printer driver (PCL 6), firmware, et
-
Cannot open the file Excel of Skydrive on Google Chrome
I use Google Chrome as my browser main house, and I use Windows Live to work. When I log into Windows Live and try to open an Excel file saved on my Skydrive to my Excel program, I can't open it for incompatibility of Google Chrome with Windows Live.
-
I can't activate call unlock or none for my premium double Xperia Z5, can anyone help
-
How to copy data to the device in Blackberry
I develop application for blackberry that have the back-end database. Database contains some data so I import that database of res on SD card, there are perfectely working in the Simulator. When I install my app into the device then it is not working