FPGA horribly Simple producers of error Code (-61003)

Can someone tell me why this piece of code produces error-61003?

I am trying to write code for a new FPGA, and the troublesome thing doesn't compile. The draft code has absolutely nothing to do with the project, but it is the simplest code that produces the same error when I try to compile it. I have two theories about why they do not compile: 1. the FPGA cannot physically shuttle data around the way I would like 2. I found an edge case that the compiler is not prepared to deal with. If there is a simple reason for this error I can work around, please let me know. This is by far the worst time I've ever had trying to find the source of an error.

To reach the error: download the two files in the same directory, open FPGA2.lvproj, expand target FPGA, build specifications (under the target FPGA), click with the right button on WhyDoesThisError, select generate.

That's what I get for guessing. The thing of arbitration apply to multiple accessors in the same loop.

What seems to work on my machine is getting rid of the dowry of constraint on the business exit tunnel structure. It looks like loop analysis drop-get fired upwards by his presence, perhaps in conjunction with the selector being a source of control (?). This looks like a bug to me, because your other VI runs. At the very least, it needs a better error message. If you can check that you see the same thing, I will submit a request for corrective action on this.

Jim

Tags: NI Software

Similar Questions

Simple Handler.vi error ignores the error code?

I'm trying to understand the behavior of Simple Error Handler.vi, and it confuses me because it seems not be properly error code I give.

According to the documentation, if I have an error code, then:

If error in indicates an error, the VI ignores the error code. If this is not the case, the VI it tests. A nonzero value means a mistake.

But my observation is that when the error indicates an error, the VI always shows a dialog even when given an error code. Instead, I use the Handler.vi to General error and providing an exception action (cancel error on match) and an exception code to get the behavior I want.

What am I misunderstanding?

MacNorth wrote:

I'm trying to understand the behavior of Simple Error Handler.vi, and it confuses me because it seems not be properly error code I give.

According to the documentation, if I have an error code, then:

If error in indicates an error, the VI ignores the error code. If this is not the case, the VI it tests. A nonzero value means a mistake.

But my observation is that when the error indicates an error, the VI always shows a dialog even when given an error code.

There are two ways of interpreting unaware them in the sentence: "If the error indicates an error, ignore them error codeVI."

How to fix (error code: ssl_error_bad_cert_domain) on my homepage

I have my own site as my homepage but firfox will not load and give this message (error code: ssl_error_bad_cert_domain) I used dreamweaver to create my site and it worked fine until today

SorayaConway said

I have my own site as my homepage but firfox will not load and give this message (error code: ssl_error_bad_cert_domain) I used dreamweaver to create my site and it worked fine until today

ACTUALLY THE PROBLEM IS now RESOLVED - and the solution was much simpler
I contacted my GENIUS HACKER and inside of five minutes I put an answer that solves the problem
He said
"LOOK AT THE ADDRESS BAR IT PROBABLY SAYS" HTTPS /: "REMOVE THE S SO THAT IT IS HTTP."
I did and he was right--
I don't know how the "s" got here but its gone now and all is well
Thanks to those who responded

How to solve ' error Code: 403.14 "try to open a link in a Web site that works on other computers and worked on my computer til now.?" "

The site is www.Jardencs.com/careers. When I click on "Career opportunities", I get the following error message:

Query error
Prohibited directory
Registration denied
Close the browser and try to connect again.
Error code: 403.14.

The link worked on my computer up until now and now working on my cell phone. I recently installed the torch, but uninstalled it today when I started having this problem.

When I click on the link, I get sailed on a different site, https://erecruit.jarden.com/erecruit/jarden.html. This is done via a script rather than a simple link.

Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.
```
I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
```
I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

Error code 23 Bulletin Board.

Hello

I've problem with display error code compare 23 and doesn't work. When I press right button display error! I can't use the feature on this feature, it is locked.

Who can help me? Please, I beg you!

Thank you very much!

Hey Buddy,

It seems that something has confused your display software and if you get an error code and it s not in use.

Simple reinstallation of the program should help get rid me of this. Simply visit the Web from Toshiba site and looking for the latest version. Download and install it then your bulletin board software should work again as usual. :)

How can I clear an error code CANbus (NOR-9853)?

I use successfully the two ports of a NOR-9853 of cRIO backplane 9104, unity a port is disconnected. The disconnected port gives me error 65538 (Op failed) while him remains functionally connected port error 65539 (entry missed 1 or several data points). I can detect the switch using these error codes, but I don't know what are the best measures for:

(1) continue to use the connected port

While

(2) voting the disconnected port to see when it is reconnected

Looks like you have every port IO nodes in the same loop FPGA.

If one node of IO is a failure, he'll at least have a timeout 4 seconds before it fails, and the default time is 14 seconds (configured in the properties). There are two time-outs: one is the output
Timeout, configured by the user in the 'Advanced Options' dialog box of the dialog box properties module and the other is a second timeout 4 fixed in
LV-FPGA pending a response from the CAN module.

If the nodes are in the same loop, the disconnected port will block the loop again and again causing the port always connected to sample to a crawl. Try moving them to their own lines.

HP Pavilion dv6-7020us: driver error Code 28 problems

Sorry if this is kind of a long start...

Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

Got Windows 7 x 64 bit installed.

Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

The problem, however...

With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

Now currently at a loss to know what to do...

Properties: Details: Hardware ID: value...

Ethernet controller

PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

PCI\VEN_10EC & DEV_8168 & CC_020000

PCI\VEN_10EC & DEV_8168 & CC_0200

Network controller

PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

PCI\VEN_1814 & DEV_539A & CC_028000

PCI\VEN_1814 & DEV_539A & CC_0280

PCI device

PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

PCI\VEN_10EC & DEV_5229 & CC_FF0000

PCI\VEN_10EC & DEV_5229 & CC_FFOO

PCI Simple Communications controller

PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

PCI\VEN_8086 & DEV_1E3A & CC_078000

PCI\VEN_8086 & DEV_1E3A & CC_0780

SM Bus controller

PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

PCI\VEN_8086 & DEV_1E22 & CC_020500

PCI\VEN_8086 & DEV_1E22 & CC_0C05

(USB) Universal Serial Bus controller

PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

PCI\VEN_8086 & DEV_1E31 & CC_0C0330

PCI\VEN_8086 & DEV_1E31 & CC_0C03

Unknown device

ACPI\HPQ0004

* HPQ0004

Unknown device

USB\VID_138A & PID_0018 & REV_0078

USB\VID_138A & PID_0018

. . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

Hello:

Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

Ethernet controller:

This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

File name: sp56167.exe

Network controller:

This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

File name: sp57538.exe

PCI device:

This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

File name: sp56166.exe

PCI Simple Communications controller:

This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

File name: sp56158.exe

Controller of Bus SM: NOTE: first install this driver and restart.

This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

File name: sp56156.exe

Controller of universal serial (USB) Bus:

This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

File name: sp56164.exe

ACPI\HPQ0004:

This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

File name: sp61037.exe

USB\VID_138A & PID_0018:

This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

File name: sp56403.exe

error code 21

Hello

I have a request, written in LV7.0, written on a W2K machine, which gives me when I run the exe on W98 machines. The exe file is built with the time of execution of engine built in. Exe works well on another W2K machine and gives the following error on two @98 machines...

LabVIEW support 21 error code: required to run external subroutine could not be found.

I am using a call to a DLL interface to a USB device, but a copy of this dll is installed on the computer in the app folder. I doubt that the problem I read on with calls of this dll in the dll school because another application, developed on the same machine, works fine on the same machines of W98. In fact, I used this same dll to talk to USB devices for a few years now and has never met this particular problem. I don't use any other cards DAQ, or any other material for which LV expect to see drivers.

I saw, in my research, a reference to this error when using the open documents vi, but the link was broken. I use documents open in this app. I don't know if it's important.

Does anyone know how to get LV to give more information than the simple generic?

Thank you.

Rick

I should have been ready to believe that one. I found the problem, and that's all. I thought I was using the same dll, but in fact, it turned out to be different versions of the same dll. In other words, the dll, from the same manufacturer with the same name, had different release dates. The new dll appeared the problem. My guess is that the new dll has dropped support for W98. In any case, it's all good now. Thank you.

CompactRIO RT (:-65589) error code: error or warning occurred when writing the following shared Variable)

Hello

is anyone know this error Code:-65589?

This error says:

Shared in environmental_logger.vi variable
This error or warning occurred when writing the following shared Variable:
CompactRIO Target\Mod2\DO1 \\RT
\\localhost\Mod2\DO1

My cRIO9073 has 3 modules:

MOD1: 9203 HAVE,

MOD2: 9472 DO,

Mod3: 9265 AO.

When I delete all States and run only the first "init" State where I put DO0 = true and DO1 = false, I get this error. What could be?

I think we need more information about your project - you can take a screenshot of your project LabVIEW RT target and the location of the shared variables? What is the configuration of the shared variable? Do you use the cRIO Scan Engine or FPGA (or both?)? How you deploy your library of variables? You should also zip to the top of your project and join, if you can.

Here are some articles about the possible causes:

http://digital.NI.com/public.nsf/allkb/C32368835ADAEE19862578500067A8C4

http://digital.NI.com/public.nsf/allkb/7B52091D2FFA01EC86257C32005DF935

Windows 2008 Server Standard not install KB3099860 with error code 8000FFFF

Hello

I look after 3 x Windows 2008 Standard Edition servers. Two of them to date very well and are up to date with updates. One of them however, which is identical in hardware to either of the other two and even fewer programs (we use it as a simple file server), fails on the last update released December 2015:

KB3099860 a security update for the .NET Framework 3.0 Service Pack 2 in Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: 8 December 2015

I tried a variety of things after having studied the problem these past few days, including:

1 Uninstalling some updates before this one and see if they re - install. They are all re - install fine until I get to it where it fails with 8000FFFF error code so this leads me to believe that this is not in itself a problem with updates

2. manually and also linking this Microsoft 'fixit': http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff

3. how to install the System Update Readiness Tool for Windows Server 2008 that installs but does not report errors

4. manually by downloading the fix and trying to install - does not work.

5. all the details here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ae6e81e9-5c49-4826-89bc-04a676992706/error-8000ffff-windows-server-2008?forum=winservergen

including rename them the folder C:\Windows\SoftwareDistribution Windows Update and giving of right on drive C for "Network Services" - still does not work.

6. as it is associated .NET I tried to repair .NET facilities that exist on the server (2, 3, 3.5 and and re-apply updates, but even once, fails on it.)

So, what should I do now? The behavior may suggest that it is that only this particular associate .NET that is a failure and that future ones will work, but it's "critical" and which relates to the .NET version which is initrinsic to the Windows 2008 operating system I think I should get it fixed :)

Any thoughts?

Thank you

Dan

You need to ask this Technet as they manage the server issues:

https://social.technet.Microsoft.com/forums/WindowsServer

hope that helps

Error code 80070005

I can not install the automatic updates I get the error code 80070005, my MSIserver does not run and I can not "restart" I get access denied, I can't install Vista service pack 2, I get the Error error code: ERROR_ACCESS_DENIED0x80070005, I tried the reset option to reset administrative passwords etc.! There must be a simple solution because it's just ridiculous!

Good news, problem solved computer updated and running service pack 2! all I had to do was follow the following instructions :) http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx Best advice EVER and it actually worked :) totally impressed!

Thanks for your help anyway!

Win7 update error code 643 KB 973688

Error code Win 7 643 for update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). Must have tried 10 times at least. All I get is the error code and it can not install XML based Services. Have you tried system restore, but that did not help at all. If anyone has a solution please let me know. Also how can I remove the extra cannot be installed in "Update history". One thing it says XML Core Services 4.0 Service Pack 2. I do not have the Service Pack 1?
Thank you

Shadowwraith wrote:

[1] ... As you suggested, I used the Microsoft fix it program and...

[2] ... An observation, that I pointed out, this is whenever I try to update KB973688 Windows uses the [original] file downloading, so apprently isn't replaciing real upgrade file...

[3] ... Another observation is that system update readiness tool ran for all of 15 seconds or more. Though according to the informatiom page it takes quite a bit longer.

A1. What program "At Microsoft fix it program" (e.g. KB971058)? I don't mention a "fixit" in any of my previous posts on this topic.

A2. It is assumed that you should not have deleted the content of...

%windir%\SoftwareDistribution\Downloads<=this>

.. .alternance step 2 in my second reply to this topic.

In addition, if you had completed all stages #1 à #4 in my second response to this issue, Windows Update should no longer offer KB973688.

A3. It is quite possible that the preparation of updated system (or CheckSUR) tool had already been downloaded & run my Windows Update.

TIP: Read the Symptoms section of http://support.microsoft.com/kb/973688.

(1) do you have an installed application that "uses Microsoft XML Core Services (MSXML) to process XHTML files" and (2) that "generates a lot of requests when it tries to retrieve well known from the definition of the Type of Document (DTD) from a World Wide Web Consortium (W3C) Web server files" and (3) to "these redundant retrieval requests cause the W3C Server block requests DTD?

If you can't answer YES to all three of these conditions, you don't need to install KB973688 and steps #1-#4 in my second reply to this topic should prevent Windows Update from the offer.

Sorry, but I can't be any simpler than that. Yes, it's a little complicated, but it isn't either "rocket science". Good luck.

That - 1073807252 serial port error code means?

Hello

I have a client with a prototype device that uses a USB OR for RS-422 interface connected to a PC. On the LabVIEW, the following error code application of the serial port is seen:-1073807252

What does this code mean? Is there a place where serial port error codes are discussed?

Thank you.

Bob

Right-click on the cluster of error, and then select 'explain the error.

Alternatively, use the Simple (or general) error handler.

He tells you: VISA: (Hex 0xBFFF006C) an overrun error occurred during the transfer. A character not read in the material before the arrival of the next character.

Basically, this means that you do not read the serial port stuff pretty quickly.

KB2310138 doesn't have an Update, error code 80070670

I tried an update of Microsoft Secutity Essential and it failed.

Update: KB2310138 (definition of 1.97.905.0)

Error details: Code 80070670.

I googled the error code, but it was no help for me. If you find a solution on how I can try to download it again, please explain it to me in terms very simple.

Thank you

St - iron

You will find support for Microsoft Security Essentials in these forums: http://social.answers.microsoft.com/Forums/en-US/category/mse

Additional references:

Checklist for installation of Microsoft Security Essentials
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

Should I have any other antivirus software and Microsoft Security Essentials?
http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

FPGA horribly Simple producers of error Code (-61003)

Similar Questions

Maybe you are looking for